Jump to content
SAU Community

Recommended Posts

While that 33r looks tits driving as a daily to work I'd give it a week before you get teh po po problems. f*kn wish I could slam mine that hard though.. Mines sitting 100mm and still looks 4wd spec.

I agree with Cas tho series 3 lip is the sex. Wouldnt be overpaying for one though if I had 1/2 on it in good condition.

not to mention the ridiculous shenanigans to go up even the flattest driveways

GTRs aren't meant to be dumped... looks tits but no... just no... trying to put 600hp down while being hellaflush... good luck to you sir

True that sir, I'm trying to make mine look good yet practical for everyday and getting some good track times / drag times. There needs to be a balance not just on it's ass with huge rims and stretched tyres that will have ridiculous camber and wear out every 3 months.

I do really want some track rims and tyres though after ripping up my street tyres. A good investment I think, people telling me you will notice like 10 sec off lap times with good tyres almost straight away.

That dude has to be running some spacers to be flush on a gtr... what sizes do those wheels come in too be that flush?

My car is super dooper low... and I have not been pulled over nor even looked at funny by police... east side people need to harden the f**k up

the car is 4wd height currently due to vicpol and needs exhaust overhaul for that reason, which will also happen. I remember what they were like lol but the car was lowered at that point too.

No offence taken but as u well know urself Jack- all the shit that comes with that car is a massive pain in the ass. I'm in a bit of a dilemma with that as I don't want the workshop I went to to get in trouble for somethinG that is nissan's fault. So I've just emailed Jesse streeter to see if anything can be done for less than Nissan aus' price.

Nick - the mere fact that I get asked web people see it if it's 'really a series 3?' is enough reason to need to get te right part... It'd be like putting an evo 7 hood on an evo 8 and have people say is that REALLY an evo 8? Lol

Hello, just for your info, if your really hell bent on getting the correct part. i remember that it was a Justcar Insurance repair correct? i'm also with Justcar and when i had my GTR repaired Nissan also ordered the wrong parts they ordered all standard parts as per my VIN but my car has all genuine Nismo parts. which they re-ordered for me. also the intercooler had a dent in it, so i made them order another intercooler aswell.

so just cars had to re-order nismo front bar, lower lip, nismo front indicator (they got me the standard orange one) and another r34 gtr intercooler. so i don't see anything wrong with you asking your insurance to get the correct lip for you (that's why we pay so much money for comp). just make sure when you call up you have your claim number ready, also when you pick up the car you would of signed saying that your satisfied with the repairs just say you asssumed the lip was the correct one and that you had no idea that nissan would make a mistake on something so simple. good luck.

it wont reflet badly easy enough mistake.

as for the gtr yeh billy i rkn spaces possibly but not much camber so it may not be, biggest size is 18x.9.5 +12 i believe.

agree hellaflush isnt for gtrs imo but that looks amazing :wub:

Correct about size and offset of the wheels... Considering they're what I have on the car currently :P without spacers the front are almost but not quite flush... Now that the cars raised they sit fairly flush at the back and verge on poke lol. When the car was lowered the tyres were tucked under the guard a bit n it didn't look as Mexican as it borders on now.

He means they arnt 18x9.5 .. must be custom or something no way thats 18x9.5 +12 mine are 18x10 +15 and look sunk in the guards compared to that (mine would stick out 9.7mm more). Also look small as compared to that.

Umm again leigh... Mine are those exact specs... 18x9.5 because that's the same size my advans were and I wanted to reuse the tyres. Also they are +12 as ordered by work japan because that's what I told them to get me....pls check my photos again cuz they look damn sexy on my 33...

that no make a sense, cos they are that size on a 33 and do look good. :unsure:

dont try troll me smart arse lol.

no way a +12 would sit that close to the guard,

i mean they must be running spacers.

He means they arnt 18x9.5 .. must be custom or something no way thats 18x9.5 +12 mine are 18x10 +15 and look sunk in the guards compared to that (mine would stick out 9.7mm more). Also look small as compared to that.

Your wheels stick out a further 3mm... .5 inch is ~12mm which means 6mm further out o either side of the rim and the +12 would minus 3mm from your +15 making it on 3mm further out ;)

That GTR must be running spacers or little to no camber ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, thumbsup from me. The distant shot of the bay just looks same-same as before.
    • Dad had a court case drag out with them from 1998 to 2004. He was in a not at fault accident, NRMA were the ones who covered the other person. They tried to blame his neck injuries on the fact he'd had an injury in 1981 on his extreme lower back where he slipped a single disc right near the bottom. Had been all cleared from that injury for years. This accident destroyed his shoulder, and f**ked a heap of discs in his neck, and he still has major problems with it to this day. Sarah's sister while on her L plates had a small Suzuki Alto, she had stopped to give way to an ambulance, and someone changed lanes behind her because there lane was also slowing, and rear ended her at 80km/h. (She had been stopped for a few seconds already too!). Car was completely f**kED. NRMA sent the vehicle around to 3 different workshops as they kept claiming "We believe it can be repaired, and not written off, we just need to find the correct workshop". It took 3 months, and a lot of arguing before they'd concede and wrote it and paid out. About two years later her sister had a Lancer, someone pulled out of a stop sign without stopping (in an 80 zone). Her sister swerved, hit the front of the other persons car (Instead of dead t-boning the drivers door), which ramped her Lancer, and made it roll multiple times down the road. It hit every panel on the way through. Her sister had slid her self out of the car, and remembers the ambos walking to the accident (They'd been sitting at a set of lights just down the road and witnessed it) and they were saying "Well, this ones going to be a fatality, no way you can walk away from that". Well, she did. And then NRMA sent two assessors out to look at the car, both of which wrote it off. They tried to send another assessor out, except a HUGE uproar was raised, and they FINALLY paid it out. That was on a car, that had damage to EVERY panel, you could see from 100m away the whole car was also twisted, roof bowed etc. Nah, we'll try get out of needing to payout on a $10,000 car... Her sister ended up with major shoulder reconstructive surgery being required, and was permanently limited in her ability to do her job as a nurse after that, as she can't (And was told before surgery too this would be guaranteed to happen) regain full strength in that shoulder. However, there was no choice to not have it, as she could barely use her arm, which was her dominant one, and was in near constant major pain. (And she's the type of person that would try and walk off a broken leg!) NRMA did the biggest run around on the personal injury side too for about 18 months, even to the point of trying to put 100% blame of the accident on Sarah's sister, even though the other driver admitted she didn't look, and didn't stop, and was charged by the police. Sarah used to have a Barina insured with them. It was a policy setup, paid all 12 months in advance. At the end of the 12 months, Sarah was living with me, I reviewed the renewal, it clearly stated "If you do nothing, your policy will cease on XYZ date". We did nothing, as we moved her insurance in with all of mine and I was with Shannons. We find out 10 months later, NRMA decided, because he DAD had a car insurance policy at the same address as what Sarah's mailing address was (Garaged address had been changed), that they'd put Sarah's (What should have been non existent policy) onto her Dad's month to month charges on his credit card. We had to jump through hoops, to get a refund. They didn't care that we actually found the letter that said "If you do nothing, your policy will cease" they made us prove we had NON COMPULSORY insurance else where before they'd issue the refund, and after they agreed to the refund, it still took another 6 weeks and 3 more phone calls for them to actually process it. They also had two insurance claims from storm damage, and they were an absolute cluster to get resolved as well (one vehicle, one house). Some how, up until about 3 years ago, her parents were still loyal to NRMA too, and we were like "How the hell are you so loyal to staying with them, when other places are so much cheaper, and they've f**ked you over every time you've ever had to make a claim?"
    • I got the four AN10 fitting welded up to the cam covers and started up making the head to sump breather/drain lines. The front passenger side cover I used a 45 up top and a 90 at the bottom into the stock VCT head drain spot (3/4" BPST to AN10 adapter) thats unused on the RB25DET NEO with some speedflow flame shield to protect it from the manifolds heat.   back passenger side was a 90 up top with some flame shield and 45 at the sump end. The rear drivers is 45 at both ends   the front drivers fitting is capped off for now but ready to go if i want to try moving the breathers around. I was told by the fabricator to leave all the welds raw for now to make sure there are no pin hole leaks. A lot of cleaning up, re bundling looms and degreasing to go as well as final assembly on the cam cover baffles. The first real test will be 28th March at a Circuit event. added complexity and more spots for leaks but overall looks relatively neat imo
    • Yeah i think the dash needs to come out. To get the loom or maybe just climate control and radio cluster. My mirrors are done i think the motors don’t work so well after flood haha i need the ac fan, you said you wanted to keep it for your 31 and interior loom not including boot. The wiper motor. I’m not sure how good the window surrounds are on the exterior on the pintara.  I will message you to get your bank details shortly 
    • Just another barrier put up to stop cars being modified. When we're all driving Chinese sewing machines, you won't want to modify it anyway, and you'll likely already have slashed your wrists and be locked up in a padded room for your own protection.
×
×
  • Create New...