Jump to content
SAU Community

Victorian Post Your Ride Thread


sami`

Recommended Posts

I'll do it this week. Will be purchasing some lock tight and a special key haha.

Just be careful if you reuse the standard bolts, make sure your torque rates are correct and that you tighten them in the correct pattern

I would use new bolts myself

Link to comment
Share on other sites

I'll do it this week. Will be purchasing some lock tight and a special key haha.

It is just a 12 point 8mm and 12 point 10mm iirc

So BBS would have designed it this way to give you an option. Very clever!

Just make sure you align the face exactly dead center

Just be careful if you reuse the standard bolts, make sure your torque rates are correct and that you tighten them in the correct pattern

I would use new bolts myself

I re-used my bolts and they still run fine, it is just a matter of not over tightening them

Link to comment
Share on other sites

It is just a 12 point 8mm and 12 point 10mm iirc

Just make sure you align the face exactly dead center

I re-used my bolts and they still run fine, it is just a matter of not over tightening them

yeah spline bits 8mm and 10mm

Well I've still got my standard bolts, but I went gold anyway. So I needed new :P

Link to comment
Share on other sites

yeah they are definitely a set of wheels which could make alot of cars look awesome i think!

Ive thought about buying some other wheels just to keep the panasports immaculate lol

Link to comment
Share on other sites

top level of a carpark on russell street right next to billboards

took like 5-10 minutes to make it up there cos the ramps can be a little steep at times :/

Ah yeah, I know the one.

Tight ass carpark will all the corners.

But you would of had to pay for parking when you leave yeah LOL! Pay money to take a photo of your car :rofl:

Link to comment
Share on other sites

Lol I did have to pay! But I was having lunch in the city with a friend so was already parked and took them when I came back to the car lol :P

Im looking forward to some sun to get some nice pics of the purple colour!

Link to comment
Share on other sites

Looks great Aaron. There's nothing like attending a meet and getting free "professional" photographs :P

What's that little black thing attached to the front bumper and the fender on each side? If it's holding it all together, I might need one too :X

Link to comment
Share on other sites

Looks great Aaron. There's nothing like attending a meet and getting free "professional" photographs :P

What's that little black thing attached to the front bumper and the fender on each side? If it's holding it all together, I might need one too :X

Lol amen to free stuff! And thanks!

Yeh they are latches holding on the front bar, ripped it off at sandown lol. But don't regret doing it at all. It takes me like 30 seconds to get the bar off now.. There are still 2 screws under the grill so the bar isn't getting stolen either lol

Was like $25 from auto barn

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...