Jump to content
SAU Community

Recommended Posts

Ford Tickford EF EL XR6 XR8 Rims with Tyres

Pick up only in Melbourne

Apparently these will fit a nissan or toyota can anyone verify ?

There was a set of these on ebay that went for 500

post-61447-1279504133_thumb.jpg

$350

3 good tyres 1 not so good

Pm me for any other details

These are XR8 copies, same stud pattern as skyline and toyota (5x114.3) but wrong offset, these are a straight fit for pre AU falcons, what suburb are you in and do they come with caps?, might be interested for my daily fairlane.

Edited by W0rp3D
These are XR8 copies, same stud pattern as skyline and toyota (5x114.3) but wrong offset, these are a straight fit for pre AU falcons, what suburb are you in and do they come with caps?, might be interested for my daily fairlane.

You are wrong ! They are not XR8 copy's they are GENUINE FORD,

What makes you say they are copy's ?

So wrong offset meaning they will fit a skyline or toyota with spacers !

No centre caps

I am in Prahan

STILL FOR SALE

Maybe i am wrong, i thought that only th copies had the extra little bits at the end of the spokes but all the pics i can find have them.

As for offset i believe the difference would probably need bolt on spacers not just 5 or 10mm spacers, pre AU fords are pretty much 0 offset whereas skylines are around +35 i believe.

Maybe i am wrong, i thought that only th copies had the extra little bits at the end of the spokes but all the pics i can find have them.

As for offset i believe the difference would probably need bolt on spacers not just 5 or 10mm spacers, pre AU fords are pretty much 0 offset whereas skylines are around +35 i believe.

They are genuine they came off my XR6 EL and have Ford embossed on the rear of the rim.

Here are some on ebay- click below

Ford Tickford Ef El Xr6 Xr8 Rims With Tyres

As for offset you are probably correct, I will find out tomorrow

If you intrested in the wheels, please pm me

STILL FOR SALE

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How's everyone going? Just a shout-out introducing myself. I'm James, I live on the north side of Brisbane. I bought an R33 that had been left to rot in someone's front yard for 14 years. Apparently, it has immobiliser/fuel issues. Long story short, it's suffering from a seized engine, plus whatever else turns up once it runs. The car is pretty good considering it sat for so long. It pretty much died after being imported. It has a bunch of Jap parts and a full Top Secret body kit. It's painted Fiat Turchese Festival, or aqua blue if you're not French. Another project to throw money at!
    • So the clockspring is responsible for the indicators cancelling on their own? I thought that was the function of that white thing in the center (any idea what it's called?)
    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
    • So, the other thing I've sorted is a baseline dyno run up at Unigroup's new location. The auto trans was a little unco-operative by both shifting down when the throttle was floored on the dyno (so Mark had to ramp it up more slowly than in a manual) and also by shifting up at 6,000 even in sports mode instead of the indicated redline of 7,000 Still, on a hot day it made 240rwkw at 16psi which seems about right for 300kw (400hp) through an auto at the wheels.  The shape of the curve is not quite right because it was not full throttle to about 4,500 to stop it kicking down, but until I can get a tune on the auto trans control this was the best we could do.....full boost will be well below 5,000 once that is sorted, I'll get some data logs when I can to confirm For comparison, the R32 made 255 at 12psi (at 4,500) on the same dyno with tune, n1 turbos, cam gears, big exhaust but otherwise all standard so the v37 is likely a little better out of the box. One thing that is very clear is that the standard water to air intercoolers are not up to sustained use at full throttle in warm ambient temps. After about 5 runs (so only a few minutes full throttle), it was pulling boost and timing and dropping 10-15% power. Unfortunately I didn't get that printout and the Unigroup guys are away at the moment, will try and get hold of it on their return. So, looks like a healthy engine to start modifying and the only real area of concern is the w2a heat exchangers which the aftermarket has plenty of solutions for    
    • I maintain it actually looked really nice in person. So much so that I thought "No, this is illegal" but there it was, clear as day. I think we can easily call the wing and wheels/height to be transformative. Not saying it's better than the GR Whatever, or the 86, or the WRX STI or anything of that sort (the internet says it all bolts up so you can buy best of all worlds?) but it's still at least a thing and not nearly AS bad as people say.
×
×
  • Create New...