Jump to content
SAU Community

Allout R33 Skyline

WHITER33GTS-T
 Share

Recommended Posts

craked Proficient

craked

Posted
Posted

can you belevie the car was build by a cement render lol

and that they had no transbrake yes thats right it was off the foot brake the motor hasnt even been pushed yet big things to come from adams car he is aim for 7s as a full weighted car and would you beleive he drives it to the gym every day what a total package car well done spinner what a true street car

NXTIME Grand Master

NXTIME

Posted
Posted

Top stuff! This car has done extremely well in such a short amount of time.

Apparently uses RD28 block with RB26 head.

It has a 9" solid rear end, Zebra. There is a video on youtube showing the engine bay and under the car.

Lith, define "street" :thumbsup::D:) :) :D :D

2rismo Grand Master

2rismo

Posted
Posted

Awesome car and an awesome run. I have to be honest though Paulie, I've seen this car run plenty of times off the transbrake and it just blows the tyres off of it. There's either lots more setup in the rear end that needs to happen or a bigger tyre needed. Going off the footbrake helped it compared to how it was leaving off the transbrake.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 GTR clutch master cylinder adapters

      By r32-25t · Posted

      I’ve got one on mine and it’s fine, 
    • GTSBoy
      R32 GTR clutch master cylinder adapters

      By GTSBoy · Posted

      No, you don't want to plug the vacuum line, as that will turn that side of the booster into an air spring and probably make it feel worse. I'm not saying that the GTR master itself doesn't need a booster. I haven't paid attention to the GTR one to know what size it is cf the non-GTR ones. But when you think about it - they have to do the same job, which is to move a little slave piston a few mm to do what it is supposed to do, and that final action is the same on all the cars. So, it is very unlikely that the GTR MC is any different than the others, because it has the same pedal stroke and the same output requirement. The booster just makes it feel easier. I'd suggest you probably have an actual hydraulic problem. It's totally common on these old shitboxes.
    • Kinkstaah
      R34 GT > GTT compatibilities

      By Kinkstaah · Posted

      Ye, in terms of bolting up the "Conversion" from a GT to a GTT is effectively "Use GTT parts for everything" Except the subframe itself, because you won't want a HICAS/4WS subframe. Remember your ABS system will be different too, thanks to GT being the S15 3 sensor system, instead of the R34 4 sensor system for wheel speed. I do not know how people get this to work given R34 diffs do not have a provision for an ABS sensor (they are on the tone wheels of the axles). I assume***** people use S15 gear/R34NA forever when they realize this - Or they convert it to a rear diff/axles that are R33 style which I presume has the singular speed sensor on the diff itself, but then you have to wire it all in and...and... and...
    • GTSBoy
      MLR's Bogan cruise ship

      By GTSBoy · Posted

      Foreshadowing was never so easy.
    • GTSBoy
      Rear hub bolt torque r34

      By GTSBoy · Posted

      The ones in brackets are the first stages of tightening. I usually aim for the middle of the range. They give a range because it's actually not that critical to hit exactly the right bolt tension. Enough is enough, and too much is too much, and the range given is inside that range. Half of the bolts in the suspension are problematic for putting a torque wrench on anyway, so just get done up to mechanic tight  and spanner checked a week later.
×
×
  • Create New...