Jump to content
SAU Community

Recommended Posts

Any pointers?

I've jump started it from all sorts of things from GTi-R to a tow truck with twin batteries it still wouldn't start. In fact I've melted 2 jump start cable..

It just crank slowly, crank again then crank again till the cable melts...but funny enough it did start last weekend. Any ideas? It seems like there's not enough power to the starter to crank it into life. Funny enough the power windows refused to work as well.

Link to comment
https://www.sau.com.au/forums/topic/33004-r33-wouldnt-start/
Share on other sites

it might help if u have fuel in the car:D possibilities are starter motor?? did u play with the fuses?? i played with the fuses last time in my car and put one in the wrong place and it wouldnt jump start at all...it would crank over and then die. have u tried putting another battery in your car to see if its the battery at fault?

i dunno....good lucks with it

Link to comment
https://www.sau.com.au/forums/topic/33004-r33-wouldnt-start/#findComment-662476
Share on other sites

There's fuel but doesn't seem like a whole lot in there. Possibly drop another 5L in there and see how it goes...

Which fuse(s) should I check?

With batteries..haven't tried that but the battery shouldn't matter - at least with my other cars even if the battery's screwed, I can still jump start it just that it can't be charged.

Link to comment
https://www.sau.com.au/forums/topic/33004-r33-wouldnt-start/#findComment-662538
Share on other sites

coils not producing spark? spark plugs stuffed? I would say if you have cranked this car till the jumper cables have melted you would have done some serious damage to the starter, as it is only ment to run for 5 secs or so. Also, Im with Chucky, make sure your engine is properly earthed to the chassis, because a bad earth connection can make wires heat up and melt, especially when your using lots of amps when cranking.

Link to comment
https://www.sau.com.au/forums/topic/33004-r33-wouldnt-start/#findComment-664129
Share on other sites

And if your +ve wire or -ve has melted that would explain the slow cranking short of a stuffed starter...

Sumo

P.S. Sometimes its easier to just take it to a autoelec and they should if they are decent give you a heads up on what is going on, free of charge. I know at my work we do.

Link to comment
https://www.sau.com.au/forums/topic/33004-r33-wouldnt-start/#findComment-664166
Share on other sites

My experience has been that when the battery has totally died, and you need to jump start it, you need to have the 'jumper' connected to the 'jumpee' and engine idling for several minutes. The 'jumpee' battery needs at least some charge in it.

Also, the ECU needs something like 7V to activate itself. Cranking on a low battery will reduce the voltage available to the ECU to below the threshhold, and so the ECU will not activate, and if it isn't activated, it can't tell the coils to fire.

And don't forget, most cars have the battery up front, so there's not that much cable between the battery and the starter. The 33 has to get volts all the way up to the front from the boot.

If you can, connect the+ve jumper cable directly to the +ve of the starter motor, and the -ve directly to the engine block.

Alternatively, go and buy a new battery, and you'll avoid the "melted starter cables" syndrome.

Link to comment
https://www.sau.com.au/forums/topic/33004-r33-wouldnt-start/#findComment-665084
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...