Jump to content
SAU Community

M35 Custom Exhaust

scotty nm35
 Share

Recommended Posts

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I have my well broken in 3 inch system for sale. Custom 3 inch dump, highflow cat, 2 resonators and a HKS muffler. Im looking for $1000 price negotiable.

Keep in mind this only has one flange at the base of the dump so shipping could be expensive unless I cut it in half.

post-63525-1279842710_thumb.jpg

post-63525-1279842889_thumb.jpg

post-63525-1279842918_thumb.jpg

post-63525-1279842938_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/330048-m35-custom-exhaust/
Share on other sites
Bis-e Bee Mentor

Bis-e Bee

Posted
Posted

Free bump :(

When are you going to start producing the "special" new dumps? :) I could be interested in one of those once SAS pulls da finger out with the ecu's.

scotty nm35 Grand Master

scotty nm35

Posted
  • Author
Posted
  Bis-e Bee said:
Free bump :D

When are you going to start producing the "special" new dumps? :thumbsup: I could be interested in one of those if SAS pulls da finger out with the ecu's.

Fixed. :)

I will have to rip my system back off to make a jig. No problem if anyone orders one...

  • 2 weeks later...
iamhe77 Grand Master

iamhe77

Posted
Posted

Free bump but I gotta ask, how the hell is this not sold? ;)

Guys are willing to pay $400+ for a dump pipe and then need to buy a front pipe/cat and cat-back... so factory in anywhere from an additional $1500-2200

Here is a FULL 3" turbo back exhaust (dump, frontpipe/cat & cat-back) which bolts straight up and includes an HKS muffler for a neg $1000... :P

  • 2 weeks later...
Dunc Mentor

Dunc

Posted
Posted

Is the dump the same dimensions as the standard cat-blocked dump? And if it is, would you be willing to sell the dump seperate to the rest of the exhaust?

scotty nm35 Grand Master

scotty nm35

Posted
  • Author
Posted
  Dunc said:
Is the dump the same dimensions as the standard cat-blocked dump? And if it is, would you be willing to sell the dump seperate to the rest of the exhaust?

No its not but I can make one that is, I have a jig set up for it already and I think two turbo flanges left, just need to organise the lower flange. (They have a wider bolt pattern than the usual 3 inch flanges.)

I would like to keep this system together due to it being a full custom, sorry.

Dunc Mentor

Dunc

Posted
Posted
  scotty nm35 said:
No its not but I can make one that is, I have a jig set up for it already and I think two turbo flanges left, just need to organise the lower flange. (They have a wider bolt pattern than the usual 3 inch flanges.)

I would like to keep this system together due to it being a full custom, sorry.

Completely understandable. I'd be tempted on the whole package but I rather like the rest of my exhaust system (Specifically the Nismo tip :D)

I'd be hugely grateful for a PM if/when you get the metal in for the lower flange though :rant:

PetroDola Proficient

PetroDola

Posted
Posted

what price for shipping to qld ?

Im looking for a zorst for my m35 and quite happy to pay $1000 plus the shipping (if its not insane)

should still work out less than $2k for a new one

Can you get me a quote

Cheers

PetroDola Proficient

PetroDola

Posted
Posted
  Dunc said:
Is the dump the same dimensions as the standard cat-blocked dump? And if it is, would you be willing to sell the dump seperate to the rest of the exhaust?
  scotty nm35 said:
No its not but I can make one that is, I have a jig set up for it already and I think two turbo flanges left, just need to organise the lower flange. (They have a wider bolt pattern than the usual 3 inch flanges.)

I would like to keep this system together due to it being a full custom, sorry.

completely standard dump also.. guess the same thing would apply for me

scotty nm35 Grand Master

scotty nm35

Posted
  • Author
Posted
  PetroDola said:
completely standard dump also.. guess the same thing would apply for me

Its fine mate, this system will fit no worries if you buy it all.

PetroDola Proficient

PetroDola

Posted
Posted
  scotty nm35 said:
Its fine mate, this system will fit no worries if you buy it all.

fantastic ..just what im looking for!

i've replied to your intial PM

send me another when youve got a figure or reply to this thread!

Thanks Scotty :thumbsup:

  • 3 weeks later...
PetroDola Proficient

PetroDola

Posted
Posted

decent mid range boost increased.

gets on boost around 2300rpms rather than 2800rpms and spools up much quicker

turbo is heaps louder and a much louder note on idle.

works well :dry:

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...