Jump to content
SAU Community

Recommended Posts

From a competition perspective brutal mid range torque is what rally engines are based on , they don't rev because they have turbo restrictors which put a limit on how much air can be drawn in with only atmospheric pressure outside them - at best .

sthe Sierra Cosworth and they failed dismally because the gap between lag and restrictors the flow limit was initially very small . All the manufacturers/teams had to reduce turbo size so as to get them to make boost and have a wide enough usable rev range .

Anti lag systems were also used but they are very hard on the manifolds and turbos because of very high exhaust temps through them .

The R33 GTS25T thing is very different to the Evos and equivalent WRX STis . From memory the 33 makes 184 Kw and I'm not sure where the std cars torque peak is . The figures for my Evo 6 GSR is 206 Kw and the torque peak is at 3500 revs . The STi GC8 was I think a little lower Kw wise and they were noticeably lazy up to about 4000 revs .

Both the AWDs are lighter than an R33 in the case of the Evo 6 had larger wider wheels and tyres .

My GSR std weighs 1360 Kg and the stripper RS 1260 Kg . They have 20 more Kw , weight 120 kilos less and have AWD and more rubber to put the power down than a GTS25T .

In fact my R33 and the Lancer both have 17 x 8.5 wheels and 235/45 tyres on them and you can guess which digs it claws in best under all conditions .

I'll agree that Nissan wasn't after extreme performance from the GTS25T's , they obviously had the GTRs to carry the flag in that era .

Also from what I read it seems that people don't modify RB25's to make strong low to mid range torque , most want the 240+ RWKW and there will be a rev penalty paid for using single scroll turbos large enough to handle the gas flow for 240-300 Kw .

It is possible that making lots of low to mid range torque in a 1380 Kg RWD car would make for lots of wheelspin so when it comes higher up it happens at higher speeds where traction could be less of a problem .

A good friend keeps telling me that the Prince Motor Company was where the Skyline brand came from and they always intended them to be an open road GT type car . The Evos and STi Rexes are a bit harder edged and bite harder in the on/off throttle operation than the RWD Skyline , they are more sure footed and chuckable IMO and my Evo anyway is much sharper in its response to driver inputs . Just different factory developed DNA for different purposes .

A .

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

A good friend keeps telling me that the Prince Motor Company was where the Skyline brand came from and they always intended them to be an open road GT type car .

Yep that is correct.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
    • Don't do what I did, use a 300000km old housing with billet gears. The old pump probably was clearanced with saw dust, Edward Lee's special engine treatment sauce and a good odo wind back. I had oil pressure issues, then replaces pump with new housing, new billet gears and 2x track day later binned a motor due to other oil related issues due to a previous engine builder. Long story short, buy a M2 or 3 or 4 N55/S55/S58 and enjoy life.
    • Yeah. "New pump" does not have to mean "massive pump".
    • Well, can you still get an OEM pump, and by the time you're buying a Nismo/N1 etc, just buy another aftermarket pump. It's better to have the pump able to flow more if its needed, than for your pressure to drop off. At any point in time, you're replacing the oil pump in a rebuild. Aftermarket pumps are likely going to be a better economical choice, and they don't have any negatives, even if they can flow more.   Also, when you're saying "replace the pump gears" are you meaning leave a 25+ year old housing in the engine with unknown wear, and just put new gears in? As that sounds silly to me, especially if you do have that minute amount of wear, that means your new pump gears now have a little bit more clearance beside them, which means, whelp, you may not get to build a lot of oil pressure or make a lot of flow.
    • Right, but if you replace the pump gears + put a spline or sine drive gear on the crank on a Nismo/OEM/N1/etc pump at that point do you really still want more flow/oil pressure? Let's say this is a the aforementioned "keep it simple" build, no more than ~400 kW at the crank.
×
×
  • Create New...