Jump to content
SAU Community

Recommended Posts

From a competition perspective brutal mid range torque is what rally engines are based on , they don't rev because they have turbo restrictors which put a limit on how much air can be drawn in with only atmospheric pressure outside them - at best .

sthe Sierra Cosworth and they failed dismally because the gap between lag and restrictors the flow limit was initially very small . All the manufacturers/teams had to reduce turbo size so as to get them to make boost and have a wide enough usable rev range .

Anti lag systems were also used but they are very hard on the manifolds and turbos because of very high exhaust temps through them .

The R33 GTS25T thing is very different to the Evos and equivalent WRX STis . From memory the 33 makes 184 Kw and I'm not sure where the std cars torque peak is . The figures for my Evo 6 GSR is 206 Kw and the torque peak is at 3500 revs . The STi GC8 was I think a little lower Kw wise and they were noticeably lazy up to about 4000 revs .

Both the AWDs are lighter than an R33 in the case of the Evo 6 had larger wider wheels and tyres .

My GSR std weighs 1360 Kg and the stripper RS 1260 Kg . They have 20 more Kw , weight 120 kilos less and have AWD and more rubber to put the power down than a GTS25T .

In fact my R33 and the Lancer both have 17 x 8.5 wheels and 235/45 tyres on them and you can guess which digs it claws in best under all conditions .

I'll agree that Nissan wasn't after extreme performance from the GTS25T's , they obviously had the GTRs to carry the flag in that era .

Also from what I read it seems that people don't modify RB25's to make strong low to mid range torque , most want the 240+ RWKW and there will be a rev penalty paid for using single scroll turbos large enough to handle the gas flow for 240-300 Kw .

It is possible that making lots of low to mid range torque in a 1380 Kg RWD car would make for lots of wheelspin so when it comes higher up it happens at higher speeds where traction could be less of a problem .

A good friend keeps telling me that the Prince Motor Company was where the Skyline brand came from and they always intended them to be an open road GT type car . The Evos and STi Rexes are a bit harder edged and bite harder in the on/off throttle operation than the RWD Skyline , they are more sure footed and chuckable IMO and my Evo anyway is much sharper in its response to driver inputs . Just different factory developed DNA for different purposes .

A .

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

A good friend keeps telling me that the Prince Motor Company was where the Skyline brand came from and they always intended them to be an open road GT type car .

Yep that is correct.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seemed to be good when Jeff owned it but they did a shit job on my car, probably worth a think before spending 10's of thousands of dollars where they might be cutting corners
    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
×
×
  • Create New...