Jump to content
SAU Community

R32 Gt-r 21st Birthday Cruise, See 1992 Bathurst 1000 @ Edge Cinema, Katoomba 10/10/10

Bis-e Bee
 Share

Recommended Posts

Bis-e Bee Mentor

Bis-e Bee

Posted
Posted

Any Stags interested? Would be nice if we could get a good collection of C34's and M35's along for the trip.

http://www.skylinesaustralia.com/forums/R3...ru-t324580.html

Bis-e Bee Mentor

Bis-e Bee

Posted
  • Author
Posted
yeh I might be interested depending on other schedules! :ninja:

pencil it in your diary then and see how your busy schedule pans out.

looks like a good drive and should be a fun day out for all :D

Daleo Grand Master

Daleo

Posted
Posted

It's rare that something happens in my bit of the world, I'll be putting this on the calendar. Would be awesome seeing wall to wall GTR's!

Bis-e Bee Mentor

Bis-e Bee

Posted
  • Author
Posted
It's rare that something happens in my bit of the world, I'll be putting this on the calendar. Would be awesome seeing wall to wall GTR's!

Awesome stuff! I posted it up in the Stagea area because I have missed heaps of good events because I seldom look at any of the other forums.

Would be nice to see a Stagea contingent!

Bis-e Bee Mentor

Bis-e Bee

Posted
  • Author
Posted
I'll be along...but I'm bringing the 32 race car not the stagea :)

weak man... weak :domokun:

Can't the mrs drive the stag? :)

Duncan Grand Master

Duncan

Posted
Posted

lol no doubt she'll be driving the race car....its just a question of whether I am allowed to drive the stagea as well or if we are just taking one car.

either way it will be huge, would be great to see a decent stagea turn out :domokun:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By dbm7 · Posted

      Duh... to answer my own silly question, it's actually described in the FSM... ...400 pages away at the end of the manual, for RB25DE/DET signal descriptions, it cites the TPSwitch signal action, is dependent on the TPSensor value ~ this tends to infer the builtin POT voltage signal is the primary, and the switches are fallback/secondary should the POT fail/TPSensor signal lost (and switch alone with no TPSensor signal allows for base idle speed setting).... makes sense... they (TPS units) used to fail/wear the POT with time, they're not exactly built to last ~ having the switch as a redundancy gets around this...(or, it's less likely both signals would be lost as they're on different power rails)... and of course wrt RB26DETT, you have to electrically disconnect the IACV solenoid from the harness, to defeat idle air control...  
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      Dose is unaware just how much fun 145-150kw would be in a 2.5L NC MX5. It would be one of the most fun things to drive to ever grace SAU.
    • dbm7
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By dbm7 · Posted

      Same thought crossed my mind ~ depends on how one connotes 'stalling'...ie; gets a rough/stumbling idle as it get warm until it stalls... or... idles ok and simply falls-over when it gets to temp... ...you can test the whole circuit with a couple of resistors ...unplug coolant temp sensor, bridge terminals with a 2K7 resistor (ECU will do cold start), or with engine warm bridge with a 330R resistor (ECU will consider engine to be at normal operating temp)...it's a quick way to check wiring integrity/ECU response when you don't have a multimeter handy ...
    • Murray_Calavera
      Exhaust silencers/varex exhausts

      By Murray_Calavera · Posted

      They also make them with the motor mounted on the side 
    • GTSBoy
      Blue/grey smoke after idle

      By GTSBoy · Posted

      Just be warned that that turbo will not be a direct re-fit to the car. The exhaust housing is, of course, in the same place. It has to be - it's bolted to the exhaust manifold. So the dump will fit up. But the centre housing is not as long, so the comp housing will move backwards. This will affect both the turbo inlet and the outlet. There is fab work that needs to be done. Yes. it has one, it should have one. Paper gasket.
×
×
  • Create New...