Jump to content
SAU Community

Recommended Posts

Hi,

I'm new to the forum and asking for some help identifying if a skyline GTR for sale is a real NISMO. If it is, I plan on buying it and really belonging to the forum then.

I've looked around the forum and found a couple things I could check:

1.) the VIN (should be a BNR32100xxx) series chassis number, and there should be a special plate on the car identifying it as a NISMO edition (with # of 560). And that plate number should also match the xxx digits on the engraved firewall VIN.

2.) the body (ie. no front bumper mesh, has boot lid spoiler, etc.)

3.) possibly the options (normally no A/C, no ABS)

Now there are a couple things that make me suspicious about the car:

1.) It's white, from what I've read, they all were originally gunmetal grey.

2.) The owner says that an R34 engine was swapped in for the original.

So the questions I have are:

1.) Am I missing any other easy to use ways of really identifying this car? Ie. are there any other etched VIN's other than the firewall? I don't like relying on the plates because those can be replaced easily.

2.) Is there a way to determine that this is really an R34 engine? And also to identify the turbos as either R32/R34/NISMO-R32 turbos?

3.) Is it possible to identify this as a N1? Ie is there a chassis series of numbers that corresponds to the N1's?

Thanks for all the help,

max.

Hi,

I'm new to the forum and asking for some help identifying if a skyline GTR for sale is a real NISMO. If it is, I plan on buying it and really belonging to the forum then.

I've looked around the forum and found a couple things I could check:

1.) the VIN (should be a BNR32100xxx) series chassis number, and there should be a special plate on the car identifying it as a NISMO edition (with # of 560). And that plate number should also match the xxx digits on the engraved firewall VIN.

2.) the body (ie. no front bumper mesh, has boot lid spoiler, etc.)

3.) possibly the options (normally no A/C, no ABS)

Now there are a couple things that make me suspicious about the car:

1.) It's white, from what I've read, they all were originally gunmetal grey. Yep, all were Gunmetal. There should be a colour code on the plate with the VIN, this will tell you its original colour. KH2 is Gunmetal, and 326 is Crystal white - all N1's are 326.

2.) The owner says that an R34 engine was swapped in for the original. Possible.

So the questions I have are:

1.) Am I missing any other easy to use ways of really identifying this car? Ie. are there any other etched VIN's other than the firewall? I don't like relying on the plates because those can be replaced easily. There's a thread in the general section where you can post the VIN and have it checked through Nissan Fast, try that as a start.

2.) Is there a way to determine that this is really an R34 engine? And also to identify the turbos as either R32/R34/NISMO-R32 turbos? Turbo's will be hard, but from what i know, R34 RB26's started with the following numbers, RB26-069xxx, RB26-072xxx. I think there's others, but these are the run of the mill R34 RB26 numbers.

3.) Is it possible to identify this as a N1? Ie is there a chassis series of numbers that corresponds to the N1's? Yep all N1's chassis code ends in either ZN (non VSpec N1, ie 91/92 model) or ZY (VSpec N1, ie 93/94)

Thanks for all the help,

max.

Hey mate, see above.

On the colour of the car, my neighbour has a r32 nismo in gunmetal grey but hes actually looking for one in red which I realised is ridiculous but he explained that from buying from the omori factory they do give choices on colours other than the stock colour. For example there is a Z-Tune for sale on GTR-R.com that is in midnight purple that they say is from the factory. Not sure how the process works though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
    • While it is a very nice idea to put card style AFMs into the charge pipe (post intercooler, obviously), the position of the AFM and the recirc valve relative to each other starts to become something that you really have to consider. The situation: The stock AFM is located upstream the turbo, and the recirc valve return is located between the AFM and the turbo inlet, aimed at the turbo inlet, so that it flows away from and not through the AFM. Thus, once metered air is not metered again, neither flowing forwards, or backwards, when vented out of the charge pipe. When you put the AFM between the turbo outlet and the TB, there is a volume of pressurised charge pipe upstream of the AFM and there is a volume of pressurised pipe downstream of the AFM. When the recirc valve opens and vents the charge pipe, air is going to flow from both ends of the charge pipe towards the recirc valve. If the recirc valve is in the stock location, then the section between it and the TB doesn't really matter here - you're not going to try to put the AFM in that piece of pipe. But the AFM will likely be somewhere between the intercooler and the recirc valve, So the entire charge pipe volume from that position (upstream of the AFM, back through the intercooler, to the turbo outlet) is going to flow through the AFM, get registered as combustion air, cause the ECU to fuel for it, but get dumped out of the recirc valve and you will end up with a typical BOV related rich spike. So ideally you want to put the AFM as close to the TB as possible (so, just upstream of the crossover pipe, assuming that the stock crossover is still in use, or, just before the TB if an FFP is being used) and locate the recirc valve at the turbo outlet. Recirc valve at the turbo outlet is the new normal for things like EFRs anyway. In the even of a recirc valve opening dumping all the air in the charge pipe, pretty much all of it is going to go backwards, from the TB to the recirc valve near the turbo outlet. But only a small portion of it (that between the TB and the AFM) will pass through the AFM, and it will pass through going backwards. The card style AFMs are somewhat more immune to reading flow that passes through them in reverse than older AFMs are, so you should absolutely minimise the rich pulse behaviour associated with the unavoidable outcome of having both a recirc valve and an AFM in the charge pipe.
    • Yep, in my case as soon as I started hearing weird noises I backed off the tension until it sounded normal again. Delicate balance between enough tension to avoid that cold start slip and too much damaging things.
    • I'm almost at a point where I feel like changing the alternator. Need to check the stuff you mentioned first though.
×
×
  • Create New...