Jump to content
SAU Community

Recommended Posts

Hi,

I'm new to the forum and asking for some help identifying if a skyline GTR for sale is a real NISMO. If it is, I plan on buying it and really belonging to the forum then.

I've looked around the forum and found a couple things I could check:

1.) the VIN (should be a BNR32100xxx) series chassis number, and there should be a special plate on the car identifying it as a NISMO edition (with # of 560). And that plate number should also match the xxx digits on the engraved firewall VIN.

2.) the body (ie. no front bumper mesh, has boot lid spoiler, etc.)

3.) possibly the options (normally no A/C, no ABS)

Now there are a couple things that make me suspicious about the car:

1.) It's white, from what I've read, they all were originally gunmetal grey.

2.) The owner says that an R34 engine was swapped in for the original.

So the questions I have are:

1.) Am I missing any other easy to use ways of really identifying this car? Ie. are there any other etched VIN's other than the firewall? I don't like relying on the plates because those can be replaced easily.

2.) Is there a way to determine that this is really an R34 engine? And also to identify the turbos as either R32/R34/NISMO-R32 turbos?

3.) Is it possible to identify this as a N1? Ie is there a chassis series of numbers that corresponds to the N1's?

Thanks for all the help,

max.

Hi,

I'm new to the forum and asking for some help identifying if a skyline GTR for sale is a real NISMO. If it is, I plan on buying it and really belonging to the forum then.

I've looked around the forum and found a couple things I could check:

1.) the VIN (should be a BNR32100xxx) series chassis number, and there should be a special plate on the car identifying it as a NISMO edition (with # of 560). And that plate number should also match the xxx digits on the engraved firewall VIN.

2.) the body (ie. no front bumper mesh, has boot lid spoiler, etc.)

3.) possibly the options (normally no A/C, no ABS)

Now there are a couple things that make me suspicious about the car:

1.) It's white, from what I've read, they all were originally gunmetal grey. Yep, all were Gunmetal. There should be a colour code on the plate with the VIN, this will tell you its original colour. KH2 is Gunmetal, and 326 is Crystal white - all N1's are 326.

2.) The owner says that an R34 engine was swapped in for the original. Possible.

So the questions I have are:

1.) Am I missing any other easy to use ways of really identifying this car? Ie. are there any other etched VIN's other than the firewall? I don't like relying on the plates because those can be replaced easily. There's a thread in the general section where you can post the VIN and have it checked through Nissan Fast, try that as a start.

2.) Is there a way to determine that this is really an R34 engine? And also to identify the turbos as either R32/R34/NISMO-R32 turbos? Turbo's will be hard, but from what i know, R34 RB26's started with the following numbers, RB26-069xxx, RB26-072xxx. I think there's others, but these are the run of the mill R34 RB26 numbers.

3.) Is it possible to identify this as a N1? Ie is there a chassis series of numbers that corresponds to the N1's? Yep all N1's chassis code ends in either ZN (non VSpec N1, ie 91/92 model) or ZY (VSpec N1, ie 93/94)

Thanks for all the help,

max.

Hey mate, see above.

On the colour of the car, my neighbour has a r32 nismo in gunmetal grey but hes actually looking for one in red which I realised is ridiculous but he explained that from buying from the omori factory they do give choices on colours other than the stock colour. For example there is a Z-Tune for sale on GTR-R.com that is in midnight purple that they say is from the factory. Not sure how the process works though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...