Jump to content
SAU Community

Recommended Posts

ok thinking about changing my ecu so ive done some snooping on my rs260 and what i found was that on my ecu theres a garantee plaque on it from mines (number 5063) and also a sticker with the barcode from Hitachi ltd with a nismo sticker below that. Does that meen its a nismo ecu and mines are the tuners.. My camera doesnt like me today so ill get photos up when i can..

Also on another note checked my turbos and they have garrett stamped on the side my question is are the stock turbos garrett or are they after market..

I know they are noob questions but any help would be great...

Link to comment
https://www.sau.com.au/forums/topic/330533-what-ecu/
Share on other sites

Get a Power FC, I will slap you if you put anything but that on a 260RS. Haha

:(

I mean don't get me wrong, I have a GReddy EManage Ultimate on my 400hp JZZ20 Soarer, and they are really good. But for an RB26, it will pay to spend a tiny bit of extra coin and get a Power FC tuned for it, PLUS 99%, if not 100% of dyno tuners out there will know exactly how to tune a Power FC on an RB26. You can pick up brand new ones for about $1000 delivered, brand new, from Japan.

Here's the link: Perfect Run Japan - Power FC (Clicky Clicky!)

And this is the part number you will need: 414BN029

As for your Garrett Turbos, yes, they are stock items. Garrett make the turbos for the RB26. GT2530 if I remember correctly. My 1JZ turbos were made by Garrett but they had Toyota CT12A cast onto the compressor housing, but I think the steel label on them said Garrett.

Link to comment
https://www.sau.com.au/forums/topic/330533-what-ecu/#findComment-5369892
Share on other sites

I use a PFC in my rb26-powered car, and to be honest, I'm not very impressed. Do yourself a favour and get a Haltech Platinum computer: I'll be switching from PFC to Haltech shortly: much better tune available with the Haltech...

Link to comment
https://www.sau.com.au/forums/topic/330533-what-ecu/#findComment-5369913
Share on other sites

I use a PFC in my rb26-powered car, and to be honest, I'm not very impressed. Do yourself a favour and get a Haltech Platinum computer: I'll be switching from PFC to Haltech shortly: much better tune available with the Haltech...

Really? Last I checked the tuner has a bigger input than the ECU.

(not knocking Haltech Platinum as they are a great bit of kit)

Link to comment
https://www.sau.com.au/forums/topic/330533-what-ecu/#findComment-5370185
Share on other sites

So long as you get a tunable ecu the most important factor is the tuner. Find the best tuner in town and discuss your ecu choice with him (or her) before you buy and install it. The tuner in Sydney whose fame has spread to Auckland is Yavuz at Unigroup Engineering.

Best bang for buck is Nistune but if you want better I would choose the Link (or ViPec). Support and new developments are better for them than for Pfc. The main advantage of the PFC is that there are a lot of tuners around who can use them (how well is another matter!).

Link to comment
https://www.sau.com.au/forums/topic/330533-what-ecu/#findComment-5370276
Share on other sites

I use a PFC in my rb26-powered car, and to be honest, I'm not very impressed. Do yourself a favour and get a Haltech Platinum computer: I'll be switching from PFC to Haltech shortly: much better tune available with the Haltech...

Really, Micah?

Really? Last I checked the tuner has a bigger input than the ECU.

(not knocking Haltech Platinum as they are a great bit of kit)

So long as you get a tunable ecu the most important factor is the tuner. Find the best tuner in town and discuss your ecu choice with him (or her) before you buy and install it. The tuner in Sydney whose fame has spread to Auckland is Yavuz at Unigroup Engineering.

Best bang for buck is Nistune but if you want better I would choose the Link (or ViPec). Support and new developments are better for them than for Pfc. The main advantage of the PFC is that there are a lot of tuners around who can use them (how well is another matter!).

Agreed, the tuner should be the biggest factor in the equation (assuming that the computer suits the car in the first place).

My car is going in to Unigroup next week for a PowerFC retune and clutch change, and Yavuz is an incredibly down-to-earth guy who won't bullsh!t to you about what your car needs. He's got the backing of quite a few people here in Sydney, and justifiably so!

Link to comment
https://www.sau.com.au/forums/topic/330533-what-ecu/#findComment-5370791
Share on other sites

yes indeed: I have had the car tuned twice: first by SAS, then by Matt Spry (420AWHP), and I STILL have the annoying "power FC syndrome": the car misses at around 2500-3000rpm when under light to medium throttle... I'm a huge fan of the haltech. That said, I have seen excellent results with the Nistune computer as well.

End of the day, I'll be turfing the PFC: I'll miss the hand controller moulded into the console, but I'm more interested in having a car that runs perfectly (or as near as possible with an aftermarket ecu)...

EDIT: I should probably also mention that I'm leaning towards switching to MAP sensor rather than afm, so the Haltech is ideal...

Link to comment
https://www.sau.com.au/forums/topic/330533-what-ecu/#findComment-5371050
Share on other sites

Ahh, the ol' RB26 PFC misfire.

I believe it is an earthing issue but it can be a pain to run down.

The Nistune is the best bet today for a streetable car.

(I had a slight miss on one car around 2500-3000rpm due to the relative difference in the mapped AFR vs closed loop.....the step was too big to provide a smooth transition, leaning out that section of the map ironed it out totally)

Link to comment
https://www.sau.com.au/forums/topic/330533-what-ecu/#findComment-5371511
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
    • Just putting it out there, that's a decent list. You would be better off *not* doing *any* of that and buying someone else's modded car. Like mine. Or anybody else's. Yes it's lotto dependent and all this and that but that 70K (remember, double your guesses) could go elsewhere. Keep it stock, save your money, go lowball @Dose Pipe Sutututu :p
    • Does not mean what you think it means. The continual rising coefficient is the coefficient of friction that continues to rise with increasing temperature. Not "rising during a single stop", except inasmuch as the brakes should get hotter during a single stop. The RR would not be the best choice for a streeter. Yeah....no it's not. JAX would rummage around in the "shit pads we use for all shitboxen that come in here" and install those.
    • @Kinkstaah I've got my list.. but most of them is to do if I ever win the lotto
×
×
  • Create New...