Jump to content
SAU Community

Recommended Posts

Item:

sr20det black top motor package

aftermarket fpr with braided speedflow lines

copy greddy intake plenum

top feed injectors 550cc got a part number off the side (195500-0830)

hks rocker stoppers

forged pistons

gtr turbo

drift catch can

fmic to suit s13 (sold pending payment)

dump pipe with screamer

lt10 microteck comp with digital screem linked to it and coils with coil comp aswell over 2000 for just this set up

blitz bov

dual stage electronic boost controller

i have just been swappped this car i cant assure the condition etc of parts have told it works

fine and made 350hp on 18psi but cant assure this as i have no dyno sheets.

im no mechanic and cant be bothered to get this going thats why i am going to part it out i

would like to sell this as a complete package for 3600 which i think is pritty fair for the amount of parts in this set up

can remove parts to make cheaper

lt10 microteck comp with digital screem linked to it and coils with coil comp aswell. 1500 tuned for setup above

s13 silvia rolling shell with 110k on it 1992 model factory sr20de model

practically completely stripped other than door cards

has recently been reprayed but the quality of the job isnt amazing still looks good though

cusco coilovers

front and rear strut braces

genuine vertex kit (sold pending payment)

some wing on it

shell is registerable is an import

will sell this all together for 2500 or near offers

17inch wheels good tread

contact details ben on 0431 640 611

prefer cash but will trade for ae86

location brisbane westside

pictures tell a thousand words so here they are

http://img818.imageshack.us/gal.php?g=012zk.jpg look here for full album

036qx.jpg

Uploaded with ImageShack.us

035by.jpg

Uploaded with ImageShack.us

025qp.jpg

Uploaded with ImageShack.us

032n.jpg

Uploaded with ImageShack.us

031rb.jpg

Uploaded with ImageShack.us

Link to comment
https://www.sau.com.au/forums/topic/330590-s13-part-out/
Share on other sites

Item:

sr20det black top motor package bare motor with power steering pump and alternator forged pistons hks rocker stoppers 1900

aftermarket fpr with braided speedflow lines 350

copy greddy intake plenum 350

top feed injectors 550cc got a part number off the side (195500-0830) $400

gtr turbo 300 with standard manifold

drift catch can 100

fmic to suit s13 (sold pending payment)

dump pipe with screamer 80

blitz bov 200

dual stage electronic boost controller 200

i have just been swappped this car i cant assure the condition etc of parts have told it works

fine and made 350hp on 18psi but cant assure this as i have no dyno sheets.

im no mechanic and cant be bothered to get this going thats why i am going to part it out i

would like to sell this as a complete package for 3600 which i think is pritty fair for the amount of parts in this set up

can remove parts to make cheaper

lt10 microteck comp with digital screem linked to it and coilpack for sr20 with coil comp aswell. 1400 tuned for setup above

s13 silvia rolling shell with 110k on it 1992 model factory sr20de model

-practically completely stripped other than door cards

-has recently been reprayed but the quality of the job isnt amazing still looks good though

-genuine vertex kit (sold pending payment)

-some wing on it

-car comes with all arms and lsd diff no tailshaft or gearbox though also have all wiring looms for car inside boot

-shell is registerable is an import

-no rust

-17inch wheels good tread will take off 500 if buyer can replace with wheels to roll it and a further 100 if they can supply suspension to roll it

-will sell this all together for 1700 or near offers

contact details ben on 0431 640 611

prefer cash but will trade for ae86

location brisbane westside

pictures tell a thousand words so here they are

http://img818.imageshack.us/gal.php?g=012zk.jpg look here for full album

036qx.jpg

Uploaded with ImageShack.us

035by.jpg

Uploaded with ImageShack.us

025qp.jpg

Uploaded with ImageShack.us

032n.jpg

Uploaded with ImageShack.us

031rb.jpg

Uploaded with ImageShack.us

Link to comment
https://www.sau.com.au/forums/topic/330590-s13-part-out/#findComment-5370178
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...