Jump to content
SAU Community

Recommended Posts

hey guys,

things have come up and i need to clear some debts so unfortunately im selling my white evo 7. i've had it for 2 1/2years now with the car been on and off the road because my engine blew up while my tuner was tuning it. he told me a metal flake (showed me a 3x3mm metal flake) got clogged in my injector from dirty fuel (not sure why the fuel filter on the fuel pump missed it?), only recently got it tuned in sydney by micks motorsport. the car has 71 XXXkm on the clock but the engine was fully rebuilt at 64 XXXkm as a 2.3L stroker. i've tried to keep the car as stock looking as possible to avoid problems.

ENGINE:

Ralliart head studs

Mahle forged pistons

Spoon forged rods and bolts

ARD 2.3L forged crank

TD06SL2R 20G turbo

Brian crower valve springs with titanium retainers

bigger hydraulic lifters (stops ticking)

780cc Siemen Deka injectors

Walbro fuel pump

HKS 272 inlet/exhaust cams

HKS timing belt

HKS M40 spark plugs

Ralliart ignition leads

Bigger oil cooler

New bearings

Beatrush cooling panel

Balance shaft kit

Apexi air intake with genuine apexi enclosure

Trust style upper intercooler pipe

Greddy Type S bov on a hks flange (can supply a HKS Racing II for extra)

metal intake pipe

Tomei dump and front pipe

3inch hi flow cat

Xforce catback

Cusco oil catch can

B&M Short shift kit

Heavy duty clutch (installed 9000km ago)

Haltech PS1000 (no afm)

Haltech shift light with custom holder

head serviced, whole engine stripped apart cleaned, full gasket kit.

car was tuned in canberra and made 252kwatw on 20psi with 492Nm of torue (timing was retarded ALOT) but the tune wasnt good as it hesistated on take off, bad cold starts,etc. So i took it to micks (10th of june) who made 248.5kwatw 21psi (forgot to get a print out of the torque) but now the car runs perfectly now. mick made 270+kwatw with 25psi but i asked him to detune it because i didnt need that much power and wanted it to be a safe daily driver.

WHEELS/SUSPENSION/BRAKES:

Enkei tarmac rally rims 17x8 with REO1R potenza's with nitrogen

Whiteline front and rear sway bars with whiteline front and rear end-links

DBA 4000 Front and rear rotors

EBC red stuff pads (front and rear)

INTERIOR:

Defi Boost and oil pressure gauge with control unit II, 2 defi warning lights (boost and oil)

Monster dual pillar gauge holder (60mm)

JVC single din head unit 3.5inch colour screen, plays DVD, avi, divx, mp3, etc. with ipod cable so direct control through head deck.

Apline 6x9

Rhino alarm, shock sensor, glass break sensor, boot/bonnet/door triggers, microwave sensor. the alarm is also controlled via sms, lock/unlock, with a fuel cut - so if someone has your keys and has dis-armed the alarm you can sms it and cut fuel. also sms's you if the any one of the triggers has gone off (tells you which one), if no response it will call you. the alarm will be, reprogrammed for new owner.

EXTERIOR:

Genuine evo 9 rear bar (brackets, lights, etc)

Shaved boot lid.

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

6.jpg

8.jpg

9.jpg

IMG_3306.jpg

IMG_3271.jpg

IMG_3273.jpg

IMG_3272.jpg

IMG_3275.jpg

IMG_3277.jpg

IMG_3278.jpg

IMG_3308.jpg

IMG_3279.jpg

IMG_3280.jpg

IMG_3284.jpg

IMG_3285.jpg

IMG_3309.jpg

i've also got some other parts that i'll sell for cheaper with purchase of vehicle in the for sale section.

Volk GTC 19x8.5 inch on brand new federal 595evo tyres

ganador led mirrors

evo 7 spoiler

evo 7 ecu

arc gear knob

moonface gear knob

car has had all oils changed at 40k with full synthetics (rear dif, gearbox, transfer case), engine oil is always changed at 5000km intervals with K&N oil filters except the last one as they didnt have them in stock. will throw in a bottle of full synthetic with a K&N oil filter with sale (oil change no due for another 4000km). I've put well over 30k on this car which i payed 30k for 2 1/2 years ago, chasing $35k

pm me or contact me on 0401573850

cheers

Edited by Icey_Cold
Link to comment
https://www.sau.com.au/forums/topic/330730-white-lancer-evolution-vii/
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 4 weeks later...

Nice evo, and nice without the wing too!

Im actually looking for a 33GTR, was orignally looking for another 32, I would actually be pretty keen to have a closer look at this in the new year, pm me contact details

Cheers,

Ben

  • 2 weeks later...

$24,500 without defi gauge/holder/warning lights.

and

$24,000 without the rear bar.

and the stock wing be supplied with car.

email me at [email protected] if interested.

thanks

Edited by Icey_Cold

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
    • @KinkstaahKrinkle paint the "silver" alloy, not the red filter frame Engine bay heat won't be a issue worth worrying about as the silver alloy blocks it off on 3 sides, as for the top, the bonnet seals most of it and the big OEM CAI intake snorkel is still fitted in its original position  I will head into Clark's Rubber when I have some time to grab some pinch weld to tidy up the alloy after I paint it As for performance, I honestly wasn't expecting any, the only reason I got it is because the intake noise sounds cool to my old ears when I'm feeding it the beans Sometimes it's the silly things you do in in life that gives the most fun, and I do love anything that makes cool car noises In other news: I survived 4 nights at sea with Jackie not throwing me over board, holidays are continuing now as we are currently chilling at the Beachcomber in Toukley, after taking the coast roads from Sydney in the MX5, top down all the way, Toukley is where I spent a good deal of my youth holidaying during the summer months, there's lots of reminiscing going on,  and lots of beaches and old houses to visit Next on the list is to head to Batemans Bay for a few days, but we will take the Commodore out to stretch its legs, then Commodore hasn't really moved for months
    • There’s probably people who’d like to do it and then when it comes to putting their hands in their pockets they’ll all disappear into the shadows 
×
×
  • Create New...