Jump to content
SAU Community

Fs: 1993 R32 Gt-r Skyline


Recommended Posts

This car is in excellent condition and has been looked after. you will not be disapointed. Has the usual wear on the steering wheel but the rest of the interior is in good condition besides 2 cigarette burns. It has a very safe tune at 300rwKW. I have over $20 000 in receipts of parts alone. I have to sell this car now so please call for an inspection, 0412591563.

Car is located in Townsville.

Price, $24,990

2000kms on new motor.

block cleaned, checked, decked, only bored 20thou.

Brand new r33 N1 crank

Greddy/trust oil pump

N1 water pump

Arias forged pistons

acl race series engine and rod bearings

Acl race series mls head gasket

Tomei rod bolts

Tomei oil restrictor

Tomei sump baffle

Mines cam cover baffles

ball bearing turbos (N1's)

550cc nismo injectors

bosch 023 800hp fuel pump

sard fuel regulator

Fully rebuilt head, shaved, new valve seals, bronze guides, etc

ported bowls

3 angle valve grind

spool adjustable cam gears

gates racing cam belt

pwr intercooler

splitfire coil packs

Z32 afm's

Apexi Power fc

Apexi turbo timer

Hks evc boost controller

remote mount oil filter, under car (no more spilling oil all over the engine bay)

oil cooler in front guard

External oil drain from head to the sump

synthetic oil only used throughout car.

300rwkw/ 400rwhp on 18psi

Trust dump pipes, trust 3.5 inch collector

3.5 inch cat

3.5 inch exhaust

Blitz twin plate clutch, converted back to push type (originally pull type, I have all the pieces to convert back)

ebc red stuff brake pads in front, jap pads in rear.

slotted dba 4000 series rotors

D2 adjustable coil overs

Cusco adjustable upper control arms front and rear

Cusco adjustable castor rods

Hicas lock out bar

All hicas equipment removed from car, rack, lines ect.

18 x 9 inch xhp wheels 265/35/18 tyres all round

handles like its on rails.

Factory midnight blue colour

Factory bodykit.

Standard interior

Autometer oil and water gauges.

Kenwood 7" touch screen dvd , infinity 6' splits, Focal 6x9's.

post-58160-1280382239_thumb.jpgpost-58160-1280382258_thumb.jpgpost-58160-1280382294_thumb.jpgpost-58160-1280382371_thumb.jpgpost-58160-1280382386_thumb.jpg

post-58160-1280382277_thumb.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Price dropped, $22990

This car has some of the oil issues fixed with the external oil drain for the head, Tomei oil restrictor and Greddy oil pump ( has larger, stronger gears to give more oil flow and pressure as well as a 8000rpm limit. N1 pumps still use the same weak gears as the std pump and only increase the oil pressure not the flow at all as well as only being good for 7500 rpm before failure. N1 pumps aren't much better then std pumps.)

Link to comment
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • It's so pretty, but I cry at the price (this setup was about $7,500 USD)  
    • Yep, I installed it, the sensors, wired everything up so things like the factory blinkers work etc. Fortunately it's not a hard job, just time consuming sorting the wiring out.  If you think this dash is nice, you should check out the actually sexy dashes lol. There would be a fair few people out there that think the IC7 is ugly.  The new and sexy Haltech dash -  https://www.haltech.com/news-events/uc-10dash/ Here is a, I hate having money option from Motec -  https://precisionracing.com.au/product/motec-c1212-display/
    • @Murray_Calavera ohhh.myyyy.gawwwwd 😍 that dash is so much cleaner.  yeah I’m someone who loves older cars, but hate using old tech. A digital dash would always be the way forward. Did you install that yourself?  Thanks for the explanation on oil pressure. I’ll just take it as reference.    Also, your engine light is on 😅😅😅
    • @DraftySquash Yeah... maybe think of those gauges as a super rough estimation of oil pressure and engine temperature.  If you want to see your actual engine temp and oil pressure, you're going to need an aftermarket solution. I'll post a photo of my dash, this is a much neater solution in this day and age. I can't think of any reason why someone would start adding individual gauges.  So grab your dash, then add sensors for all the extra things you want to see.  As for what to expect from oil pressure, super quick run down = cold oil, higher pressure. hot oil, lower pressure. Low revs, lower pressure. higher revs, higher pressure. The values will change based on the viscosity of oil used, the actual temperature of the oil, the type of oil pump used, then more nuanced stuff like clearances in the engine. 
    • Should run up to about 6 or so at high revs. But the stock oil pressure gauge is a piece of shit and can't be trusted, so make few to no decisions based on what you see it do.
×
×
  • Create New...