Jump to content
SAU Community

Recommended Posts

This car is in excellent condition and has been looked after. you will not be disapointed. Has the usual wear on the steering wheel but the rest of the interior is in good condition besides 2 cigarette burns. It has a very safe tune at 300rwKW. I have over $20 000 in receipts of parts alone. I have to sell this car now so please call for an inspection, 0412591563.

Car is located in Townsville.

Price, $24,990

2000kms on new motor.

block cleaned, checked, decked, only bored 20thou.

Brand new r33 N1 crank

Greddy/trust oil pump

N1 water pump

Arias forged pistons

acl race series engine and rod bearings

Acl race series mls head gasket

Tomei rod bolts

Tomei oil restrictor

Tomei sump baffle

Mines cam cover baffles

ball bearing turbos (N1's)

550cc nismo injectors

bosch 023 800hp fuel pump

sard fuel regulator

Fully rebuilt head, shaved, new valve seals, bronze guides, etc

ported bowls

3 angle valve grind

spool adjustable cam gears

gates racing cam belt

pwr intercooler

splitfire coil packs

Z32 afm's

Apexi Power fc

Apexi turbo timer

Hks evc boost controller

remote mount oil filter, under car (no more spilling oil all over the engine bay)

oil cooler in front guard

External oil drain from head to the sump

synthetic oil only used throughout car.

300rwkw/ 400rwhp on 18psi

Trust dump pipes, trust 3.5 inch collector

3.5 inch cat

3.5 inch exhaust

Blitz twin plate clutch, converted back to push type (originally pull type, I have all the pieces to convert back)

ebc red stuff brake pads in front, jap pads in rear.

slotted dba 4000 series rotors

D2 adjustable coil overs

Cusco adjustable upper control arms front and rear

Cusco adjustable castor rods

Hicas lock out bar

All hicas equipment removed from car, rack, lines ect.

18 x 9 inch xhp wheels 265/35/18 tyres all round

handles like its on rails.

Factory midnight blue colour

Factory bodykit.

Standard interior

Autometer oil and water gauges.

Kenwood 7" touch screen dvd , infinity 6' splits, Focal 6x9's.

post-58160-1280382239_thumb.jpgpost-58160-1280382258_thumb.jpgpost-58160-1280382294_thumb.jpgpost-58160-1280382371_thumb.jpgpost-58160-1280382386_thumb.jpg

post-58160-1280382277_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/330819-fs-1993-r32-gt-r-skyline/
Share on other sites

  • 2 weeks later...

Price dropped, $22990

This car has some of the oil issues fixed with the external oil drain for the head, Tomei oil restrictor and Greddy oil pump ( has larger, stronger gears to give more oil flow and pressure as well as a 8000rpm limit. N1 pumps still use the same weak gears as the std pump and only increase the oil pressure not the flow at all as well as only being good for 7500 rpm before failure. N1 pumps aren't much better then std pumps.)

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
    • Not great at getting the camera out fast enough for cars driving. Even in traffic. S15 is in front of the kei truck.
×
×
  • Create New...