Jump to content
SAU Community

Recommended Posts

Hey all :D

I Have a r32 gtst 2 door factory black skyline, I just brought the car.

It has a fair few scratches as it has been sitting in a shed for 8 years :)

So i have decided to strip it and respray it. :) engine bay and all. the whole thing from top to bottom!

What colour do you think would look awsome?

Cheers :D

Edited by Nackerz
Link to comment
https://www.sau.com.au/forums/topic/330975-what-colour-to-paint-my-car/
Share on other sites

Your existing paint code is 732 is it not?

If you're going to make this a DIY project and have budgeted to gut it to the shell, I'd stick to an existing R32 Colour.

My pick would be TH1 (dark blue pearl) or #2 pick is AH3 (red pearl)

If your budget is tight and you're having second thoughts about stripping everything and the engine bay isn't too dull to detail properly,...

my pick would be the R34 colour GV1 (black pearl)

my 2c

my paint code is:

732 G

732: BLACK PEARL

G: DARK GREY

According to a link on this forum.

http://www.users.on.net/~goofyhsk/info/chassis_plate.html

Well yes but no budget

Im a mechanic and do all the work myself including spray paint! :)

Its almost stripped.

so might aswell spray the whole lot!

just dunno what colour :D hence this post

BNR32

* KH2 - Gun Grey Metallic

* KG1 - Jet Silver Metallic

* TH1 - Dark Blue Pearl

* AH3 - Read Pearl Metallic

* 732 - Black Pearl Metallic

* 326 - Cristal White

* KL0 - Spark Silver Metallic

* BL0 - Greyish Blue Pearl (special order)

* AN0 - Wine Red

BCNR33

* AN0 - Super Clear Red

* BN6 - Deep Marine Blue

* KH3 - Black

* KL0 - Spark Silver

* KN6 - Dark Grey Pearl

* LP2 - Midnight Purple

* QM1 - White

* BT2 - Champion Blue

* KR4 - Sonic Silver (Post 1996)

* AR1 - Super Clear Red II

BNR34

* TV2 - Bayside Blue

* QM1 - White

* KR4 - Sonic Silver

* KV2 - Athlete Silver

* GV1 - Black Pearl

* AR2 - Active Red

* EV1 - Lightning Yellow

* LV4 - Midnight Purple II

* LX0 - Midnight Purple III

* WV2 - Sparkling Silver

* QX1 - White Pearl

* EY0 - Silica Breath

* JW0 - Millennium Jade

go the midnight purple. it is by far, the sexiest colour you can get on a skyline. ive seen one in person, and oh man.... i woulda married that colour of i possible :)

it would be a good choice in my opinion. and im the type of person who only likes black cars :P i say midnight purple.

midnight purple 3 is expensive shit the paint alone is like $7,000 (whole car) i read that somewhere not sure if its right correct me if im wrong. if you decide to paint it Midnight purple like the ones i showed its $118 Per Litre due to its red/violet pearl mix and that would be the LP2 R33 colour. i have an R33 in MP and iv bought paint to respary my front bar that's how i know the price.

Edited by DarkRyda

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...