Jump to content
SAU Community

Recommended Posts

Looks nice,

Impul body kit and an aftermarket FMIC. (maybe a Impul ECU in there also)

some sort of aftermarket suspension. Looks like the the CV boot seals are a starting to come off.

The M35 is a much more refined car than the C34 and lots more torque. A bit more of a cruiser.

You should enjoy.

There is lots of information on this forum about trouble shooting problems.

Link to comment
https://www.sau.com.au/forums/topic/331077-new-from-uk/#findComment-5376654
Share on other sites

VIN number printed on your windscreen (from the first photo), when entered into FAST tells us your car was manufactured June 2002, Exterior Colour code: KYO and interior is G (grey). Motor is VQ25DET, 4WD, 5 speed auto, Model type is 250TRSFV

Model: TLGNRSNM35UDA-A--

I recently upgraded from a '97 n/a Stagea 25X to a 2006 RX250 FOUR n/a and haven't been disappointed in any way. It's a far more modern and refined car. Quite a bit higher driving position, better economy and handling. A very worthy successor to the old model, although looks don't appeal to everyone. I always thought the old Stagea was one of the best looking wagons on the road.

Edited by Spong
Link to comment
https://www.sau.com.au/forums/topic/331077-new-from-uk/#findComment-5376678
Share on other sites

VIN number printed on your windscreen (from the first photo), when entered into FAST tells us your car was manufactured June 2002, Exterior Colour code: KYO and interior is G (grey). Motor is VQ25DET, 4WD, 5 speed auto, Model type is 250TRSFV

Model: TLGNRSNM35UDA-A--

I recently upgraded from a '97 n/a Stagea 25X to a 2006 RX250 FOUR n/a and haven't been disappointed in any way. It's a far more modern and refined car. Quite a bit higher driving position, better economy and handling. A very worthy successor to the old model, although looks don't appeal to everyone. I always thought the old Stagea was one of the best looking wagons on the road.

can't wait got the back spoiler as wellas the eye lids and some nice 20's to go on will 20's fit ok

Link to comment
https://www.sau.com.au/forums/topic/331077-new-from-uk/#findComment-5377002
Share on other sites

can't wait got the back spoiler as wellas the eye lids and some nice 20's to go on will 20's fit ok

With nice slim profile tyres, 20's may be ok but I would look for someone with 20's and see what they have to say about it.

Lots of M35's getting around with 19's but that's not to say 20's wouldn't be possible. I know the best offset is +38.

Remember if you have an all wheel drive (atessa) vehicle, keep the wheels and tyres the same all round (or atleast ensure your rolling diameter is as close as possible) or the atessa will have something to say about it.

Link to comment
https://www.sau.com.au/forums/topic/331077-new-from-uk/#findComment-5377060
Share on other sites

very nice! and congrats on being the first in the UK

+1 on getting that CV boot replaced correctly. that said, if its beyond fixing, replacement shafts are available on the yahoo auctions.

nice front mount hidden in there too :)

Link to comment
https://www.sau.com.au/forums/topic/331077-new-from-uk/#findComment-5377226
Share on other sites

very nice! and congrats on being the first in the UK

+1 on getting that CV boot replaced correctly. that said, if its beyond fixing, replacement shafts are available on the yahoo auctions.

nice front mount hidden in there too :)

wot do they do to a full tank hope its better then my old stag

Edited by enza
Link to comment
https://www.sau.com.au/forums/topic/331077-new-from-uk/#findComment-5378613
Share on other sites

just got me nm35 one of the frist in england , have a old stagea as well , how do the mn35 run never seen one or been in one ,how do they compare to the old one ?

Congrats.....nice car....if you into Mods you have a big learning curve......or a lot of reading!

First thing to look at doing is the Dump pipe!

Link to comment
https://www.sau.com.au/forums/topic/331077-new-from-uk/#findComment-5378806
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • After drying a few days, time to put her back together 
×
×
  • Create New...