Jump to content
SAU Community

R31 with diff whine, how long will it last?

cameron_bol
 Share

Recommended Posts

cameron_bol Rookie

cameron_bol

Posted
Posted

I just got my car back from a mechanic after someone interested in buying it booked it in. This mechanic tried to tell me that the diff could last between 500km and 5000km, the buyer was there too by the way. Now my brother also has a skyline, but his diff whine is so much louder than mine, and has been so for far more than 5000km without getting any worse. How can this guy try to tell me that i have as little as 500km left in my diff when I've been told by other mechanics that it could last forever? Is this just a ploy between the mechanic and buyer to get me to lower the asking price? Oh, and how much would a replacement diff?

JezR31 Mentor

JezR31

Posted
Posted

have u ever changed the diff oil? it could be a stuffed axle bearing. youll still be able to drive it, its only when it gets really load that i think u need a new diff.

that happened in our r31 at around 670000kms. but we didnt get a new one we just got the old one fixed because they were quiet expensive at the time new.

its now got to 220000kms on the original diff

cameron_bol Rookie

cameron_bol

Posted
  • Author
Posted
have u ever changed the diff oil? it could be a stuffed axle bearing. youll still be able to drive it, its only when it gets really load that i think u need a new diff

I haven't personally changed the oil, but I've only owned the car since July last year. I just want to get a realistic idea of how many k's there are left in it.

Edit: I've got 212,000 on the clock by the way.

JezR31 Mentor

JezR31

Posted
Posted

if you hear the noise while you accelerate and get of the petrol it's usually a gear backlash or worn gear issue. but if its a constant noise its most likely to be a bearing problem.

though yours brother diff sounds like its on the way out.

r31nismoid is right, alot of the r31 diffs have diff whine. its not something uncommen

skyguy3804 Collaborator

skyguy3804

Posted
Posted

I used to have an R31 (for about 8 years!). Since the word GO, the diff had whined ALL the time (as you said, around 80km/h) - was worried about it at first, until I kept getting the same story that THEY ALL WHINE, THEY ALL DO IT. As I said, I had the car for about 8 years and NEVER had any problems with the diff (and yes, I wasn't easy on the car). When I sold it to my parents 2 years ago, it had 365,000 on the clock. They've still got it, the diff still whines, and they have had absolutely no problems with it at all.

cameron_bol Rookie

cameron_bol

Posted
  • Author
Posted

Well, the problem is that it has just scared off my most promising buyer so far. He just rang today and told me that he doesn't want to buy it now, specifically because of the diff. There was no convincing him. I really need to sell it, I move down to melbourne for uni 3 weeks. AHHHH!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • marni
      I need more than help to finish my R33

      By marni · Posted

      Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • r32-25t
      Attesa pump mount options / ideas? R32 gtr style.

      By r32-25t · Posted

      From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • GTSBoy
      R34 Manual conversion Speedometer

      By GTSBoy · Posted

      Have you looked at the workshop manual?
    • GTSBoy
      rb25 gearbox mount options - solid mount?

      By GTSBoy · Posted

      Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • FRGTN1
      R34 Manual conversion Speedometer

      By FRGTN1 · Posted

      I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...