Jump to content
SAU Community

Recommended Posts

Hi guys

im tossing up the idea of importing a 89 r32gts-4 turbo

from japan

would be manual , so for easier modding

then i would drop an RB26 in there, and suit it all up

now the questions i have is , the gts4 is that AWD 4wd? as in is it allways on

and does it have that attessa torque balance?

has anyone done this type of mod before and anyone know the rough price of an Rb26 , or should i simply get a non turbo gts4 and do the conversion?

your thoughts on this would be great?

Link to comment
https://www.sau.com.au/forums/topic/33130-gts-4/
Share on other sites

the attessa same as the GTR.. i think the problem will be getting a good GTS4 b4 the end of the year when the 15 year changes, as everybody else has the same idea as you.

apparently the gts-4 didn't come out until about August (with the GTR), which means its pushing it late in the year to get one through before the changes.

Link to comment
https://www.sau.com.au/forums/topic/33130-gts-4/#findComment-664461
Share on other sites

I think you may be better just getting a GTR, or living with modifying the RB20

Does a GTS4 have the same diffs, driveshafts, brakes, radiator, gearbox etc? It can be done...but im big on saving money these days.

As for price for RB26 engine/box/ECU ie front cut minus brakes i think you are looking at around 7k, thats from a yard with a 3 month warranty

Link to comment
https://www.sau.com.au/forums/topic/33130-gts-4/#findComment-664620
Share on other sites

Mark, I have a 93 model and I hear the diff has a different ratio to the GTR, the brakes are smaller, the gearbox (according to SDU guys) is the same as GTR.

But yeah as Roy says, lotsa money to do the 26 conversion coz you're gonna need brakes and all the other crap that goes with moving a GTR reliably :)

Plus the fact that if you buy an 89 model you'll be fixing stuff like suspension as well

Link to comment
https://www.sau.com.au/forums/topic/33130-gts-4/#findComment-664634
Share on other sites

Plus, 1989 GTS-4's are pretty rare. According to SPEED magazine, the GTS-t and GTS-4 first started production in May. The GT-R was in August.

I myself am tossing up between a R32 GTS-t and a GTS-4 -- leaning towards the GTS-t though. Lighter, and supposedly more nimble around the twisties (except for hairpins and in the wet). Good for some track days with a set of Tein HA coilovers :)

Link to comment
https://www.sau.com.au/forums/topic/33130-gts-4/#findComment-664715
Share on other sites

GTR and GTS-t 4 have same gearboxes . The gts-4 has a 4.3 diff ratio and the GTR has 4.11 but they are still the same strenght. I think you would get away with using standard gts-4 brakes with some good pads as the brakes are only marginally bigger on the gtr.

Im in process of putting a rb26 into my 32 gts-t so will see if it can hold power in a straight line or if its just gonna peel lines.

Link to comment
https://www.sau.com.au/forums/topic/33130-gts-4/#findComment-664756
Share on other sites

questions questions questions.... i have a 93 GTS-4. the gearbox identical on the outside but its not as strong as the gtr one. i have 4 pot brakes onthe front and 2 pot on the rear. all shafts are the same. the suspension is the same setup but the shocks and springs aren't as good as the gtr. The 4WD system is the same as the gtr. the diff i don't know as i have auto one in there but have recently converted to manual.. :D:) :) basically you can call it a babyzilla!!! lol i have a 4 door gts4 as well so its abit different. body wise.

i also have the thought of dropping in a gtr motor too... mmmmmmmmm power.

but i think i can handle ( for awhile ) with the RB20DET.

Link to comment
https://www.sau.com.au/forums/topic/33130-gts-4/#findComment-665489
Share on other sites

hmm interesting points guys, will take it in thought, thanks

Jimih: nice car have met u and seen u on a few cruises

MRGTS4 , what did the manual conversion cost you?

7000K for a rb26, hmm might stick with the rb20 then hmm could buy a cheap gtr for 17 with all the shit attached , seriously thinking of importing once i sell this ****ing soarer

Link to comment
https://www.sau.com.au/forums/topic/33130-gts-4/#findComment-666228
Share on other sites

all the parts were off a front cut, and they cost me $1200 for everything. clutch, flwheel, console parts,etc and computer on exchange.. including the bolts to. then oil and stuff ontop of that. if you are thinking of doing it either make sure you know how to change a gearbox or get someone to do it. cause its a BIG pain in the arse the first time you do one. and get a 180b input shaft to . it makes things a shit load easier to line the clutch up. the stuff was actually from a guy in perth but my computer crashed and i losed his name and email address. if i get it again i'll give it to you.

Link to comment
https://www.sau.com.au/forums/topic/33130-gts-4/#findComment-669093
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...