Jump to content
SAU Community

Recommended Posts

Howdy yall,

Well I went done and broke something. When I bought my R33 I could not afford the stereo in it so the guy was nice and removed it before I bought it.

So I got my hands on a headset and went to put it in, but because I am a clutz I could not get it working off the acc lead, just didnt work, but i did have constant, soI just hooked it up and bobs your uncle, just had to remember to turn it off, this was going to be a temporary situation until I bought a decent head unit.

Problem was that then my clock stayed on all the time, wether the radio was on or not! So fine I'll just unplug it, and that was that.

Now I have removed that stereo out cause it was crap, and re-pluged in the clock, and now nothing! Without going through each fuse to check if I have blown anything is there any special wiring that i should be aware of, like should i hook up something else?

Thanks for your help!

Link to comment
https://www.sau.com.au/forums/topic/33135-power-to-the-dash-clock/
Share on other sites

Did you pull power from the wires going to the clock? If so, then check where you spliced it in (and consequently removed it). I'm guessing one of two things:

1) You've knocked it and have managed to cut power to the clock, or

2) You've left a non-insulated bit of wire floating around and it's shorted on something and blown a fuse.

Check the fuse first, failing that, pull out the test light/multimeter...

Allrighty then, Here's what I did:

1. I have not cut any wire off the clock but did not know if any previous owners had or not, nope still looks like it is stock, no cut wires there.

2. Checked all other wires for loose ends that could short, nope both constant and acc power to the stereo were taped up good and proper.

Both 1 and 2 were really easy to do with a gaping hole where the stereo is supposed to be :D

3. Big thanks to strutto for the Skyline FAQ, So I went and looked at the fuse box translation and lo and behold, the fuse I thought was accessories power was in fact electronics, and so when I checked the audio fuse, duh it was blown.

And now I have my dash clock back! Thanks guys for helping me out, I am really new to actually doing things to a car, other than putting petrol and oil in it, and it was good to see I was not ridiculed for being ignorant!

Thanks a lot!!

Woohoo! I was right!

I always blow a fuse when playing with the stereo... No matter how careful I am...

Revhead's advice is pretty much spot on... If you ask a question thats been answered 1000 times or is just plain st00pid, your bound to get flamed. Always try a search first.

As for team //GC... There is quite an initiation process. You must first propel your skyline down the 1/4 mile in under 5 secs. Then provide all current members with $500ea. Next comes the good old 200mph roof ride. And finally, the Evil Kinevel Skyline Bus Jump...

NOT! Just add it to your signature in your user CP if your on the Northside of the Gold Coast... It's just a dumb ass idea a few of us had not to long ago. I'm actually thinking of organising a SAU Team //GC Mountain Run / Cruise in the near future if anyone is interested...

I am definatly located on the "extreme" northern end of the GC :) and Added to sig and stuff.

I would definatly be interested in doing some cruises! Count me in!

And here I was starting to like sounds of the initiation process, just to have it all dashed away like dust in the wind :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was under the impression the reason why OEMs are going with solutions like relatively thin "right-sized" cylinder walls with technologies like PTWA and open deck is because they care a lot about whatever marginal knock margin benefits they get from that vs the structural rigidity benefits of a closed deck block and thicker cylinder walls. I also see some weird stuff like plastic inserts in the water jacket around the cylinders to try and equalize cylinder wall temperatures. re: the PRP blocks and heads at the end of the day it's hard to know what is and isn't going to work there, just have to see what the initial buyers say about it.
    • Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
    • Yeah very valid point. I am waiting for one of the other tuners to come back from vacation so he can help me a bit when the cat is installed again. In the meantime I am going to finish up my polishing and ceramic coating that I have started myself.    N45 Dr Beasley product is highly recommended for a paint primer / polisher. Using this EXO Gtechniq also for the ceramic but next time might use the light serum before hand also. Looks great. 
    • Running rich in conditions where it shouldn't probably won't do great things for catalytic converter lifespan. I would fix that sooner than later.
×
×
  • Create New...