Jump to content
SAU Community

Recommended Posts

Hey.

So ive got a r33,rb25det..

Just installed bigger turbo,the closest i can compare to would be garret 3071r.

Power fc

external 38mm turbosmart ultragate

Z32 afm and 580cc injectors...

After a huge f**k around with getting it tuned,when i was assured i would have it back same day,it finally got done.

Got 326.6hp at wheels..boost is spiking at 18,and droping back to 15 by redline..

Quote for tune was $500,ended up costing $750.

Now after driving the car around for a few weeks,im noticing it kind of hesitates sometime when light on the throttle,seems to cold start fine,but then other random times it cranking over for 10sec or more and just coughing to life..hot or cold..

Also had to wind the boost down the other day as engine light had been flashing on,and was advised it was detonating..

I know the car's not perfect,but think it mite be worth my while getting the tune looked at by someone else..

Im living near newcastle..so anywhere around here or sydney..

Also any advise is also welcome

cheers

Edited by dilfukin
Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/
Share on other sites

What turbo precisely? It seems like there is more to the story.

I would spend more time talking to your tuner before getting too far ahead. Ask more questions about why the car seems to be pinging, why it is hard to start etc.

If you have done this then what was their response?

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5384437
Share on other sites

yes common sense prevails here please

far too often we see people go get a tune, and any tiny isssue is a mega 6 page thread about the workshop being crap and a rip off before the guy spends 5 minutes talking to the workshop / tuner. please discuss with the workshop and let them address the issues. if you dont want to go back to them, goto another workshop for a 2nd opinion

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5384475
Share on other sites

have a look on your powerfc at the knock/detonation. mine never goes above 20 on 98 oct but when i have only been able to get 95 oct it has gone up to 60-80ish. think the light comes on at 100 or more from memory. make sure you have low numbers

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5384612
Share on other sites

turbo is a billet...i rang mr turbo on the goldcoast to try and track down the exact specs of the turbo,he said it would have similar spec wheels as a garrett 3071r... with .63 rear housing

I cant check knock as i dont have a hand controller for the computer,which was a problem in its self as tuner said his software wouldnt recognize my computer,saying it must be too old,so i borrowed a hand controller so he could tune it,which he did through the controller..

Boost is spiking because of crap bleed valve..two ways of fixing that is:1. another spring in the wastegate to run 18psi,or 2 get an electronic boost controller...?

Im not naming the tuner as i dont know for sure it's a tune problem....

Cheers

Edited by dilfukin
Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5385639
Share on other sites

my GTR has to be tuned with the hand controller too, trust me my tuner HATES doing it with the hand controller but the datalogit doesnt connect with all POWER FC's. mine is an older model FC i think.

nothing wrong with tuning with the hand controller its just more time consuming and more fiddly going in and out of menu's

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5386844
Share on other sites

hand controller tuning is fine and has been the std for god knows how long?

its only in the last few years workshops have got onto datalogit as mainstream

datalogit makes it quicker and easier (less cost) and lets you be a bit more picky

but there would be hundreds of well setup quick cars with hand controller tunes

go back to the place who tuned it

Link to comment
https://www.sau.com.au/forums/topic/331817-tuners/#findComment-5386846
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.
    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
×
×
  • Create New...