Jump to content
SAU Community

Price Check Register 4

Specul8or
 Share

Recommended Posts

Specul8or Apprentice

Specul8or

Posted
Posted

anyone able to tell me the app selling price (auction, not FOB) for a V36 coupe?

looking for top of the line (SP model from memory), 3.7ltr, grade 4.5 or 5, interior A, mileage of no concern as unlikely to be too high anyway.

price for both auto and manual if anyone can help?

I appreciate that this will fluctuate for a variety of reasons not mentioned above (colour, accessories and mods, luck of the draw, etc)

I'm assuming app 2.2M Yen - or is that a bit too ambitious?

Cheers,

J

Link to comment
Share on other sites
V36 Skyline Rookie

V36 Skyline

Posted
Posted

I just bought a 08 370GT S manual for Y2,687,000 (keep in mindthis was FOB so not sure, also included Y200,000 for dealer fee) at .85c........this was a good time as our dollar was stronger back 2-3 months ago, i think your being way too ambitious but good luck........just keep an eye out on the japanese auction sites daily and when you find one you like then get someone out there to inspect asap.

Link to comment
Share on other sites
  • 1 month later...
Kujotk Grand Master

Kujotk

Posted
Posted
2.5 mil FOB at least for a mint SP, I bought one last week. To the best of my knowledge no-one has the evidence for manuals yet, so it's auto only.

Manuals have been compliant for at least a month that iv'e known about. I tried to look up the list right now but looks like the page is down atm (or being updated)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      GReddy Injector Help!

      By Duncan · Posted

      Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • RB25inside
      Compatible rear drive shafts R34 N/A?

      By RB25inside · Posted

      Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • GTSBoy
      Compatible rear drive shafts R34 N/A?

      By GTSBoy · Posted

      They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Dose Pipe Sutututu
      GReddy Injector Help!

      By Dose Pipe Sutututu · Posted

      Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
×
×
  • Create New...