Jump to content
SAU Community

Price Check Register 4

Specul8or
 Share

Recommended Posts

Specul8or Apprentice

Specul8or

Posted
Posted

anyone able to tell me the app selling price (auction, not FOB) for a V36 coupe?

looking for top of the line (SP model from memory), 3.7ltr, grade 4.5 or 5, interior A, mileage of no concern as unlikely to be too high anyway.

price for both auto and manual if anyone can help?

I appreciate that this will fluctuate for a variety of reasons not mentioned above (colour, accessories and mods, luck of the draw, etc)

I'm assuming app 2.2M Yen - or is that a bit too ambitious?

Cheers,

J

Link to comment
Share on other sites
V36 Skyline Rookie

V36 Skyline

Posted
Posted

I just bought a 08 370GT S manual for Y2,687,000 (keep in mindthis was FOB so not sure, also included Y200,000 for dealer fee) at .85c........this was a good time as our dollar was stronger back 2-3 months ago, i think your being way too ambitious but good luck........just keep an eye out on the japanese auction sites daily and when you find one you like then get someone out there to inspect asap.

Link to comment
Share on other sites
  • 1 month later...
Kujotk Grand Master

Kujotk

Posted
Posted
2.5 mil FOB at least for a mint SP, I bought one last week. To the best of my knowledge no-one has the evidence for manuals yet, so it's auto only.

Manuals have been compliant for at least a month that iv'e known about. I tried to look up the list right now but looks like the page is down atm (or being updated)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stop on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, you need to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • alexburns
      Interior Light Problems

      By alexburns · Posted

      @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
    • Duncan
      GReddy Injector Help!

      By Duncan · Posted

      Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • RB25inside
      Compatible rear drive shafts R34 N/A?

      By RB25inside · Posted

      Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
×
×
  • Create New...