Jump to content
SAU Community

Recommended Posts

  • Replies 381
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Don't know how many of you guys knew, that that was my first ever drive of the DR30 on the weekend, so I was left pretty much speechless after my drive. The car blew a gearbox at Lakeide a few weeks ago, so she was running with a standard DR30 Gearbox at Eastern Creek weekend before last, and at Eastern Creek we discovered a catch can full of oil, so the engine is very tired. I had to be kind to her, not just because of this, but because of the gearbox being a standard one as well. This all sounds very dramatic, but the gearbox and the engine have not been looked at since she ran Bathurst in 1987, so that is a sterling effort, as this was her third outing under my ownership.

I had a ball for the whole weekend, wish I had of had more time to soicalise. Bring on Goulburn 2012.

Hey Cazz do you know if its hurt or just tired? might be worth investigating via your mech or workshop if your thinking of tracking it again. A preventative repair is usually cheaper than a repair after a failure.... especially if it eats a ring land or piece of ring.... down an engine and a turbo. Would hate for it to cost a small fortune to fix for the sake a track day.

sorry if i am out of place with the above statement i dont mean it to be preaching or whatever... food for thought.

thats a hell of a sexy r31 man

props

-D

U serious?

Anyway nugz, small piece of advice. Next time you've got some quicker cars behind ya bud just shuffle over. It makes life alot easier for everyone. Several times I tried to pass you and you were skidding around, a bit too dangerous to be doing on grip days with cars so close together

Other than that see you all oct 7th

not easy to do when youve never done it before....plus the auto...the shit tyres.... i apologise for getting in your way.... if i had actually seen you, i woudlntve put my foot down like that....

anyway... what with the "u serious?" comment ?? it was a skyline at the skyline nationals.... not some bloody toyota.... its been built by me.... on a tighter than shoestring budget... plus its my daily...not everyone can have sweet arsed brand new friggin cars mate

U serious?

Anyway nugz, small piece of advice. Next time you've got some quicker cars behind ya bud just shuffle over. It makes life alot easier for everyone. Several times I tried to pass you and you were skidding around, a bit too dangerous to be doing on grip days with cars so close together

Other than that see you all oct 7th

bit harsh man, people in startlet's should hardly throw stones.

Hey Cazz do you know if its hurt or just tired? might be worth investigating via your mech or workshop if your thinking of tracking it again. A preventative repair is usually cheaper than a repair after a failure.... especially if it eats a ring land or piece of ring.... down an engine and a turbo. Would hate for it to cost a small fortune to fix for the sake a track day.

sorry if i am out of place with the above statement i dont mean it to be preaching or whatever... food for thought.

We stopped racing at Eastern Creek when we found the oil in the catch can. So got the mechanics to check it straight away. I was hardly racing at full tilt, as it was my first time, it was pretty slow :P. I was not going to risk doing any real damage to the engine. The compression test showed even 100's on all four. A pretty good indication it's just tired. My Race mechanic is Jose Fernandez, and he said the car would be fine for some demo laps this weekend, and both my team mechanics agreed. I wouldn't like to lunch a 25 grand GMS engine in a hurry. I also have a spare GMS engine, that is brand new and never been run, so we are going to crack both of them at the same time, and get them both race ready.

This car is pretty simple, nothing exotic like the HR31's and the GTR's. It's all pretty basic, and the old FJ20 is pretty much bullet proof, but I still wouldn't have taken it out on the track unless the mechanics said yep. With even, low compressions, it's 99 percent just tired.

She won't be going out again until Phillip Island Historics next year, so we got plenty of time to get it right.

nothing exotic?? Cazz... it sounded absolutely fantastic.... almost stumped my mate who was thinking it had an SR20 under the bonnet..an he worked in a nissan wrecking yard...lol....but yes... looked and sounded great

Results will be up in the next few days.

Starlet was Cool, always see atleast one at the track here in Melb, as for that Mx5,

I wish the 74db limit was enforced, and that thing could have been taken off the track till it was quieter.

my honest feelings about that car was that i didnt like it. Driver was good. shame about the car only because it was so loud it was offensive.

S.a Boys make sure you see your El President to get your trophies as i would hate for him to have to keep them. :P

I have never attended an event were everyone was so welcoming and friendly you southaussies sure now how to make a Mexican feel welcome. even if you dont know what a Milk bar is for.

The event for me goes something like this:

Have as much farmers union strong as possible.

Eat Villies pies in the middle of the night

Cruse Rundal(spelling) in Passage

Stress about trying to keep everyone happy

Run around doing the meet and greet for hours

low sleep from doing official stuff

Function on one meal a day

Have some more Famers Union

Hang out with Matty T

Hang out with as many people as possible

sell some raffle tickets.

This is my 3rd nats on the Committee 2 with CSA and one with NDSOC and this has been by far the Hardest, second most stressful, *none can be as bad as the first time* event

but its all worth it when you meet so many GREAT (GROUSE) people who understand what its all about, and we have such a High Caliber of Car on Display for the General Public with 99% of attendance behaving them selves at the show and shine,

one or 2 i would like to have a few words with, like the white 33 with the plates "thehack" but thats just me being not wanting the event to look bad,

what am i saying?

SAUSA, i am now reping one of your stickers on My GTS here in Melbourne, along with My Classic Skylines Australia sticker and My R31skyline sticker,

3 clubs i am proud to have worked on this event with.

Hands down the Best Nats Ever, and its all thanks to you.

Rundle, pfft, Hindley is where its at :)

Will most definately drive over to Goulburn for the next one.

lol so that was the other street, we did actually do both..... a few times

its funny i would never go and just cruise our "cruse" spots in Melbourne but Adelaide the night scene Felt alot less violent.

and the Girls!

FARK

it was like 4 hot chicks for every guy!

hot but skanky.

:P

:)

U serious?

Anyway nugz, small piece of advice. Next time you've got some quicker cars behind ya bud just shuffle over. It makes life alot easier for everyone. Several times I tried to pass you and you were skidding around, a bit too dangerous to be doing on grip days with cars so close together

Other than that see you all oct 7th

And why wouldn't I be serious?

this is a skylines website. an r31 is a skyline. I like r31s. esp black ones that look dope.

-D

malalla is certainly "interesting" scrutineering wise..... only place they "make up regs on the spot"....

Can I ask what you are referring to with this comment?

I was one of the scrutineers and from my part, the majority of the cars presented was of a "very high quality" (quote from the chief scrutineer). "Any issues that were encountered were fixed with no fuss and no problems".

Especially considering that a large number of them were first timers on the track and had little or no knowledge of the requirements.

Assuming I am thinking of the right car it was the pullthrough in the R33 (Not an entrant as far as I am aware) who smoked them up outside the show and shine, followed by blasting off along the Anzac Highway, nearly losing the car sideways going through a turning lane surrounded by pedestrians and then blaring off down the street wheelspinning, passing cars on a suburban street into oncoming traffic, all the while on his bloody stinking mobile phone. And when he lost it the nurk nearly took out my Pathfinder which was parked by the side of the road and next to which I had had my two year old kid a few minutes before when getting something out of it.

I generally keep my language polite on forums so I will not say what I really think, but the colour would be a very deep shade of blue, calling on all the reserves of my RAAF days (Heard the expression "Swears like a trooper?")

Needless to say I am glad that overall we had a great display of what responsible enthusiasts are like over the weekend. I just wish the R33 driver drove a WRX or something instead, anything but tarnishing the image of our chosen wheels.

Can I ask what you are referring to with this comment?

I was one of the scrutineers and from my part, the majority of the cars presented was of a "very high quality" (quote from the chief scrutineer). "Any issues that were encountered were fixed with no fuss and no problems".

Especially considering that a large number of them were first timers on the track and had little or no knowledge of the requirements.

Based on all the DA, G1 rounds (not this nationals event) we have competed in over the past 5 odd years. It is made in comparison to all the other scrutineering we see at tracks we frequent australia wide.

not easy to do when youve never done it before....plus the auto...the shit tyres.... i apologise for getting in your way.... if i had actually seen you, i woudlntve put my foot down like that....

anyway... what with the "u serious?" comment ?? it was a skyline at the skyline nationals.... not some bloody toyota.... its been built by me.... on a tighter than shoestring budget... plus its my daily...not everyone can have sweet arsed brand new friggin cars mate

Mine is my daily too bud. Does 600 odd k's a week as it was on track day. Built from a beater and on a pretty tight budget. I came to skynats as I'm a sau member and it was open to everyone.

And status I've owned enough imports. Starlet is just a fun car to beat nissans in

I've noticed that all the negative comments weren't by anyone else stuck behind him. I think every session I saw a train of 4 or 5 cars being held up. It's just etiquitte

Anyway nugz you did well for the lack of traction. Hope your out there oct 7th or the cars and karts or scc day later in october

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah, fair enough. For the IAT, I'm using a legit GM sensor that was used on the car prior to my current build. I'll get another wideband and IAT ordered and follow up when they show up. Thanks for the help.
    • You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
    • Unless my sensor just died, was only a couple months old, I strongly believe it didn't. How can I test it? I never mentioned it being 20:1+?
×
×
  • Create New...