Jump to content
SAU Community

Recommended Posts

just got an r33 few weeks ago

bought it assuming the headunit was not working

finally after pulling out the headunit

and testing headunit (it works fine)

its still not working in my car

ive checked the dash and boot fuse (all good)

is there anything else i should check

also my cigarette lighter isnt working

worst come 2 worse and wiring is gone bad

what should i do

do fresh wiring? and are there any short cuts

or do i need to run a wire (normal speaker wire ok?) to the battery in the boot (and how would i connect this to the boot)

run a wire to the dash fuse (acc)

and ground the ground wire somewhere

rewiring at this stage doesnt seem hard but if i had to main question would be

are there any shortcuts to the power wire at the boot?

and if not best way 2 connect to boot (cant crimp)

Link to comment
https://www.sau.com.au/forums/topic/332092-headunit-not-working/
Share on other sites

had the same prob with my 33 headunit not working and either are the accessories in the boot pulled out the deck reconnected the wires then everything started working except no power on the screen it still remained black put was powering up making the little noise when you turn on the car and was ejecting

could anyone possibly shed some light on this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...