Jump to content
SAU Community

Recommended Posts

Ok ok, now it is my turn to join the fricking yellow sticker club.... just cos they got so much damn time on their hands

Was driving peaceably down Rosanna Road towards Mill Park, when a divvy van decided to tail my arse and then finally pull me over. Apparently, as i found out later on from one of the 'nicer' officers (if there are such things), there had been some dicks dragging and racing around the area.

This baldie officer, after getting my license, he promptly decided to look under the car and then tell me I was about an inch too low. He told me '.... well, you know your car is too low and it is very dangerous if you hit a child and they get under the car, they can get dragged along if it is too low....'. Fark me, this must be one skinny arse anorexic punk that can fit under 100mm or we must be living in oompa loompa land. Why not let us install fricking Japanese style vertex kits so that we SCOOP up the kids instead of trampling them????

So after something like 20 minutes (how hard is it to fill out a defect notice??), he gave the canary, and figgering I had no more reason to be polite, started ranting about how we skyline owners actually look after our cars and make sure they are running exceptionally well, and their real job should be to pull over POS bombs that are literally falling to bits. I told them that I wasn't part of some drag racing crap that was going on in the area and he pissed me off by saying '... thats what excites us....' :(

Meh, at least they didnt fine me or make me get a roadworthy. So what to do? I probably need to get my car raised a little (thank goodness for height adjustable suspension) and I WILL need to get the exhaust raised - or whatever you call it, cos it didn't pass rego inspection first time (2nd time they didnt even check)

So my question is - where should I go to get the exhaust raised? Anyone know someone who can do it around the South East Burbs?

Thanks for reading my rant. Its been 6months and I have only been targeted for defect this once. I dunno - maybe I should consider myself un/lucky. Gonna be a problem once I actually start modding it :flamed:

Link to comment
https://www.sau.com.au/forums/topic/33229-welcome-to-the-defect-club/
Share on other sites

hehe welcome to my neck of the woods. I live in Mill Park and as we speak there's dicks hooning about down Plenty Rd etc.

Rosanna Rd is to be avoided at all costs, cops love that road coz if they don't get you for speeding (60km/hr on a main rd come on...) they get you for defects.

Do you have adjustables? If not grab a set of stock shocks and chuck em on for the roadworthy, then take em off.

DJ_Lethal was tellin me this morning he had a set to get rid of. Grab em n get one of the boys to install it. Failing that sell danny your body n get him to do it :(

im pretty sure Daalder Exhaust would do it.

Theres one in Dandenong..

I havent got a canary yet (touch wood) but i have been epa'd and just that was a pain in the a$$ to get off...

Good luck with it!!

:(

yeah boyz just a pain in the ass - working in Sydney next week - how the hell am i supposed to get my car during the work hours to Vicroads?!?. i actually went down to the local exhaust shop today and asked if they would raise the exhaust at the muffler (cos the resonator is right at the end, right?) and they said it couldnt be done cos if it is raised too much, it could melt electrical wiring and other shit near the body. Is that true? Cos when I was feeling around there, there was definitely a gap where it could be raised into.

Anyways, I raised the rear suspension almost all the way and it seems to be at least 10.5 cm clearance at the lowest point. Whats the lowest legal limit?? Looks hella stupid, with the arse all high up and all now.

Thanks guys. Yeah they WERE being pricks, cos my body kit is over 10cm, and the exhaust is only slightly lower than the body kit, thats probably how they defected me - there was no measuring device used at all.

Its funny how even a minor defect changes your opinion of cops.

i think you have been lucky here... did they check the engine bay? did they check the interior? unlucky is when they defet you for not having a H-pattern on your knob (gear) or for not having padding on your steering wheel. they could really find some useless crap if they wanted to...

technically its 10cm ride height and if you are below it then they are well within their job description to defect you (even though the story about the dragging child is absolute crap!).

but i wish you luck in your efforts to get back on the road...

Sorry to hear - seems lots of us having to deal with the hasstle of this lately :D

My current problem is finding a good-condition aribag GTR wheel to replace the Momo with, then finding someone to swap them over. I'm scared of setting off the airbag.

Seen a couple - but they didn't have the bags in them. No point to put in on the car then. A friend has one, but left for Japan for 2-weeks yesterday - by which time my defect will have expired.

Such a pain - I'm a busy guy. Haven't got time for this crap :)

Sorry to hear Kev. LOL @ 'its dangerous if you hit a child'. You should've said "Thankyou captian obvious!" What about bullbars? Silly cops!

Rosanna Rd is to be avoided at all costs, cops love that road coz if they don't get you for speeding (60km/hr on a main rd come on...) they get you for defects.

I have driven down Rosanna Rd at least twice a day since having my Skyline (20 months) and have never had a problem....

Love you long time Kevvy! :aroused:

sounds like you have it sorted mate.

haven't forgotten about that remote start module mate, just mad busy at the mo.

James if you need an air bag wheel then mabe the boys at j-spec can help out, email [email protected]

and :zap: you shan!!

James

That sarks big time. Man I would be one pissed chimp if they got me for my moomoo wheel. How the heck are we supposed to get an original Japanese airbag wheel within 8 working days??? Mebbe I should start looking around now before that happens to me.....

Does anyone know if you can get someone else as a 'proxy' to get your car cleared at Vicroads? I can't make it this week (unless I drive back all the way to Melbourne from Sydney!!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...