Jump to content
SAU Community

Recommended Posts

I would take a stab that it's a Jap cage - if so, almost 99% of the time the answer is a NO.

Cages for registered/road going vehicles need to be built within the specs of your states laws & ADR's, and signed off etc etc.

So basically no Jap cage will ever pass as they have too many bends, come to close to your 'head space' and similar other issues.

Given a half cage, legal, is only around $1000 installed... Bemuses me why people pay $600 for a jap cage that isn't legal or as safe :)

hey yeh its not a jap one its from a mob in Brown Davis Automotive Pty Ltd. 47 Holloway Drive, Bayswater, Vic 3153,

Australia but i was wondering is a 4 point cams approved roll bar able to enter into drifting dayz coz my understanding was that u needed a full cage??

((((((Jake hi,

Thank you for your enquire.

Our kit 4 point CAMS approved roll bar for the 33 is roadworthy in WA. It fits

completely behind the front 2 seats. All rear trim can be retained but it makes

the rear seats unable to be used. The roll bar include a harness mounting bar

for the shoulder straps of racing type harnesses. They come complete with CAMS

paperwork if requested and are finished in a satin black powder coated surface

to match the trim.)))))

Ye i know Brown Davis well, cheap and excellent quality on all the cages I've seen them put together.

You'd need to check the reg's of the drift days in your state.

If it is fully blown competition, you'd probably need a full cage.

However if its club/non comp level type drift day stuff you can get away without a cage here in Vic, let alone a half cage.

since most drift events are run under cams and most are considered a 'non speed' even and can be entered on a L2NS licence you usually don't need any cage. I'm not sure if the rules have been changed now (there has been talk for a long time) but last I checked even in national level drift comps you were NOT required to have any cage so even a jap cage was ok as long as the scrutineer was happy with it and most were on the logic of some cage being better than none.

but certainly a brown davis 4 point will almost certainly be cams compliant and then it's just a matter of the regs for the event you are entering in. but as above 90% of drift events don't actually require any cage at all.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...