Jump to content
SAU Community

Recommended Posts

Hi everyone

Excuse all other posts I have made and do not question about why buying this car over another etc..... Just need good old fashioned help :D

The two cars I am interested in now is the lexus/toyota soarer, the twin turbo, and the 3L non turbo.

Lets say since insurance is bad at my age, I buy the 3L non turbo one. In about a year, I would want to start gettin high performance out of the car and would want to make it turbo.

Would the way to go be (1) replacing the 3L engine with the twin turbo soarer one, or (2) leave the 3L and get aftermarket turbo put on it. Or (3) get a totally different turbo'd engine. <-----------^

Could you please analyse the 3 scenarios in the above paragraph and give me the best way it could be done, and how much each way would cost.

Thanks heaps

-Dale

Link to comment
https://www.sau.com.au/forums/topic/33263-soarer-conversion/
Share on other sites

Short answer is i dont know...doesnt the older boxy Soarer comein 3L (7MGTE), the later model came in 2.5TT (1JZGTE) or 4.0 V8. Talk to workshops re your best options, im guessing they all involve serious money, ie 10k+

Cheapest option is getting a turbo 7MGTE from a wrecker, perhaps even just the manifold and turbo, but this means new computer as the std Toyota MAP ecus aint all that flexible, so perhaps stick with the front cut option. Good thing is thye are cheap as they can have head gasket issues, and manuals are plentiful.

Best option from a performance perspective would be a 1JZGTE front cut, but most of these are autos.

I suspect if you are going to go down the engine conversion path then an OZ delivered JZA70 Supra with the 3.0L NA six which still has something like 150-160kws...or an NA Series IV RX7 is going to be a better option. Have you thought about these sorts of cars.

Cheaper initial purchase price, cheaper upgrades, and better basis for a performance car... sorry if that doesnt help.

EDIT

The SC300 Soarer does come with an NA 2JZGE engine (NA 3.0L used in the JZA80 Supra)... so goign to a 1JZGTE - 2.5L TT or even the 3.0L TT 2JZGTE would be made a lot easier, if still reasonably expensive

Link to comment
https://www.sau.com.au/forums/topic/33263-soarer-conversion/#findComment-667181
Share on other sites

i'm assuming you are talking about the 1991+ soarers

if not then don't bother with soarers as the early (pre-1991) ones have the 7M-GTE engine which burns oil like you wouldn't believe, and has terrible issues with blown head gaskets (i know from first-hand experience)...

seems to be some confusion, so soearer comes in:

2.5TT (1JZ-GTE) - also in jza70 supra

4.0V8 (1U-FE)

3.0NA (2JZ-GE) - same as jza80 NA supra

as said by someone previously, don't bother trying to convert the NA to a turbo, as you won't have an LSD in the NA, the brakes will be crappy in comparison, the gearbox may be different and not able to cope wit h the extra torque, and the amount of parts needed for the change will result in a sizable bill at the end of it all.

best option in my opinion:

buy a 2.5TT, and get 3rd party insurance

good luck with it all,

Waz.

Link to comment
https://www.sau.com.au/forums/topic/33263-soarer-conversion/#findComment-667855
Share on other sites

I agree with Waz on this, but I have seen a very nice example where one guy converted his 2JZ-GE to a GTE. He didn't do an engine swap, just changed a fair few parts and put on some monster brakes. Not sure about the LSD though. Anyway, you're still better off with the 1JZ if you need the power. The 2JZ-GEs still go quite well though, so I don't think you'll be too disappointed with it if you did go that way.

Link to comment
https://www.sau.com.au/forums/topic/33263-soarer-conversion/#findComment-667976
Share on other sites

Dont do ANY engine swap or conversion.

The Soarer Twin Turbos are that cheap to buy and the V8' and TT versions are almosts equally sought after.

When you want performance, sell the 3.0L and purchase a TT. A conversion would be extremely expensive on such a car and the electrics are renowned for being a pain in the butt.

Link to comment
https://www.sau.com.au/forums/topic/33263-soarer-conversion/#findComment-668309
Share on other sites

oh and on the note of insurance (you mentioned this so i assume its an issue for you):

i pay $400 for thrid party without fire and theft and i consider this reasonable enough...

in the 4 years i have insured the cars i have owned, i have saved about $3000-5000 each year that would have been blown on full comprehensive insurance and even if i write off my car tomorrow the money i have saved allows enough for the purchases of a new one!

if you have decent driver training behind you then just stick to third party and drive responsibly... and save $$$$

Link to comment
https://www.sau.com.au/forums/topic/33263-soarer-conversion/#findComment-668583
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...