Jump to content
SAU Community

Recommended Posts

Hi to all,

Finally, just got my v35 250gt last thursday. I've been observing it for a week now, so far it's all good. There's just this one thing bothers me about my breaks. The car vibrates a little bit whenever I slightly step on the break pedal to slow down coming off from 80-100 kph.

Is this normal? Anyone had the same experience before? Am I just making a big deal out of it? Coz the car drives awesome and the breaks are working really well, except only for that little vibrate thing that I'm worried about.

Any suggestions and recommendations of what to do would be big help for me. Thanks!

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/
Share on other sites

before you shell out your hard earned chasing the worst case scenario, consider giving them a light skim with some wet and dry then a clean with brake cleaner. You may find some pad resin has been left on the disk surface from poor braking habits. This happens when the foot is left on the pedal when the brakes are very hot. If this doesn't cure it then they may need a machine skim. There are plenty of mobile brake mechanics that can do this without removing the disks.

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5398209
Share on other sites

Me too have a vibrating brake before on a 4WD, and I found out there's a hair line crack on it. Have to change the whole disc. I was told maybe the crack was due to sudden cooling of the disc. Like after a heavy use, car was send to a car wash where the water jet cooled the disc too fast.

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5398815
Share on other sites

+1 for a rotor issue, (most likely warped), as it's the only issue (other than an ABS fault) that will cause vibrations under braking. Does it get worse when the brakes are hot?

Not really, it only vibrates for 1 to 2 seconds if I slightly step on the break pedal and only if I'm driving a bit fast.

I'm thinking if this is a serious problem, I might bring it back to the car yard I bought it from and get it fixed.. Can I still hold them responsible for any problems with the car? Since it's only been with me for a week now and because they told me that it's been complianced so I don't have to worry about anything. Is that possible?

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5402052
Share on other sites

It came with a warranty yeah? Depends on how good the dealer is, as a rotor problem (if that's the case) could be dismissed as normal wear and tear. Only 1-2 seconds? Does it then go away completely or just become really faint?

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5402137
Share on other sites

I think it does come with a warranty. Well, it should be.. It doesn't get any worse after those few seconds. It's hardly noticeable tho. But I better get it fixed before it cause me bigger problems in the future.. I'll ring up the car yard tomorrow. Thanks guys for the help. cheers.

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5402331
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...