Jump to content
SAU Community

Recommended Posts

have a mate pulling a 2.5lt one down. engine/driveline is already gone.

if you are interested - post up what you want off it. car is in nagoya. bits will load on the next container out.

Link to comment
https://www.sau.com.au/forums/topic/332899-anyone-need-35-sedan-bits/
Share on other sites

nick,

1.have that comng already.

2.unsure of colour - its and 03/04 model - front left hit. - will check.

3. do not think its bose. - will check

Son,

I'll grab that. do you want the whole thing?

it is easier if I get he whole shelf. its not really pick a part wrecking as I can ask for various bits but they usually come as an assembly. Basically I get one shot at the car before it goes to the crusher.

Oh ok no worries!

Anyway my car is 2005 S2 sedan and does the 03/04 3rd brake lights are the same?

Maybe going to buy a V35 Coupe Manual.

Its non Navi but top glove box has the blank cover missing from the optional navigation dvd drive - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

Maybe going to buy a V35 Coupe Manual. Would like to know how much a few things are to replace to negotiate in price.

Its non Navi but inside top glove box has the blank cover missing from the optional navigation dvd drive, its just a big hole atm - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

With the air induction - it no longer looks like this

Grill.jpg

The grill to collect air is not there and the air box is not there, just has a pod filter on the end of the hose.

Should i care about this?? when looking where the box was you can just see the drain hole..

Also the right hand side window when your in the car goes all the way up and into the sill. But

1. when you open the door the window comes down (as it should) and when you close it, does not go back up

2. when you hold down the button to put window up or down it doesnt automatically do it itself

3. when the door is open the button will not make window go up or down

Do you have the mechanism to fix this? the guy said some japanese parts place near south port quoted him 20-30 to fix...

Oh also the little plastic cover that goes over the screw in the inside left door handle - need that

Edited by R6n350GT
Maybe going to buy a V35 Coupe Manual.

Its non Navi but top glove box has the blank cover missing from the optional navigation dvd drive - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

need more detail on the 'gear changer' :)

have a non navi panel - when you buy the car we can talk the sphincter of the universe.

Maybe going to buy a V35 Coupe Manual. Would like to know how much a few things are to replace to negotiate in price.

Its non Navi but inside top glove box has the blank cover missing from the optional navigation dvd drive, its just a big hole atm - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

With the air induction - it no longer looks like this

The grill to collect air is not there and the air box is not there, just has a pod filter on the end of the hose.

Should i care about this?? when looking where the box was you can just see the drain hole..

Also the right hand side window when your in the car goes all the way up and into the sill. But

1. when you open the door the window comes down (as it should) and when you close it, does not go back up

2. when you hold down the button to put window up or down it doesnt automatically do it itself

3. when the door is open the button will not make window go up or down

Do you have the mechanism to fix this? the guy said some japanese parts place near south port quoted him 20-30 to fix...

Oh also the little plastic cover that goes over the screw in the inside left door handle - need that

didnt see the rest of this:

1,2,3: motor or calibration. if motor I can get them. if calibration thats easier. again when you get the car we'll talk the sphincter of the universe.

trim item inside door handle - always missing - $5 part from nissan.

didnt see the rest of this:

1,2,3: motor or calibration. if motor I can get them. if calibration thats easier. again when you get the car we'll talk the sphincter of the universe.

trim item inside door handle - always missing - $5 part from nissan.

Thanks Chris,

Meant to say gear stick knob not changer.

Gearstickknob.jpg

How do we know about what i need for window ?

As for the trim, save me going to nissan can u also get this?

Also for the other question re: cold air induction cover and box, should i leave as is or ?

Be great if you can PM me some prices, just so i know how much i barter with the seller.

Cheers

Edited by R6n350GT

knb would be better off new ex nissan. anything I lay hands on in that area is going to be worn.

I can lay hands on 90% of the small bits on that car. if they are big bits I have to get a mate involved and that costs money.

window is likely to be a motor. since you are in QLD - where?

Edited by Chris Rogers
knb would be better off new ex nissan. anything I lay hands on in that area is going to be worn.

I can lay hands on 90% of the small bits on that car. if they are big bits I have to get a mate involved and that costs money.

window is likely to be a motor. since you are in QLD - where?

In Gold Coast, Robina.

For big stuff can come down to Brissy.

Any advice on what kind of price i need to try and save on the car to pay for these fixes?

Glad i got you close by when i start all these mods!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...