Jump to content
SAU Community

Recommended Posts

Dandy tourist rd is good except for the tourists.

Like coming down the side heading toward Canterbury Rd.

Like going up via Burwood Hwy and that left hairpin :P

Off Dandy tourist Rd is Mtn Hwy, that good going up and down, less cars.

Reefton Spur good or is it just past that going out of Reefton?

There's a turn off left you take to Lake Mountain, 100m in front of the turn off is

an access road and a big fence for yarra valley water?

For the flat area.

Some favourite roads are past Wonthaggi going into Tarwin Lower / Venus Bay,

great winding roads and tightening bends with some decent straights with one monster straight :D

v.enjoyable.

And if you game to get lost out the back of Wonthaggi a bit north of Leongatha, some real twisty

up and down all over the shop hills and dales, bit of a steep ascent/decent on a bend here and there it will test you!!

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Dandy tourist rd is good except for the tourists.

Like coming down the side heading toward Canterbury Rd.

Like going up via Burwood Hwy and that left hairpin :P

Off Dandy tourist Rd is Mtn Hwy, that good going up and down, less cars.

Reefton Spur good or is it just past that going out of Reefton?

There's a turn off left you take to Lake Mountain, 100m in front of the turn off is

an access road and a big fence for yarra valley water?

For the flat area.

Some favourite roads are past Wonthaggi going into Tarwin Lower / Venus Bay,

great winding roads and tightening bends with some decent straights with one monster straight :D

v.enjoyable.

And if you game to get lost out the back of Wonthaggi a bit north of Leongatha, some real twisty

up and down all over the shop hills and dales, bit of a steep ascent/decent on a bend here and there it will test you!!

Those locations sound incredible.

mountain hwy from bayswater to olinda, I do it most weekends

really great road but bye bye car if you make a mistake

...as I found out in my r31

Ouch. I know the feeling. King lake roads + 1am + open cliff face = epic fail.

Route between Whittlesea and Yea.

Very generous speed limit of 100km/h - most of the time you will be doing about 70 to 80km/h. Some nice 90 degree turns and hairpins with changes in elevation - mainly sweeping bends that are very deceiving - don't go at them too quick. Nice surface and very light traffic - but be careful of some wet patches on the road (because of natural springs), falling branches and some tourists heading Mt. Buller way.

In Yea there is this awesome pizza place next to the petrol station. It has some V8 supercar memorabilia on the walls and the pizza is "probably" the best I've tasted.

Dandy tourist rd is good except for the tourists.

Like coming down the side heading toward Canterbury Rd.

Like going up via Burwood Hwy and that left hairpin :rolleyes:

love that hairpin!! haha

the route from canterbury road is far smoother than from burwood hwy, i've only ever been down towards canterbury but i reckon it would be better to go up

seekool: just checked out the whittlesea-yea road, looks really good! thanks for the tip :)

Route between Whittlesea and Yea.

Very generous speed limit of 100km/h - most of the time you will be doing about 70 to 80km/h. Some nice 90 degree turns and hairpins with changes in elevation - mainly sweeping bends that are very deceiving - don't go at them too quick. Nice surface and very light traffic - but be careful of some wet patches on the road (because of natural springs), falling branches and some tourists heading Mt. Buller way.

In Yea there is this awesome pizza place next to the petrol station. It has some V8 supercar memorabilia on the walls and the pizza is "probably" the best I've tasted.

It was great on the bike, winds on forever.

I never see any po-po until the Whittlesea end luckily. :rolleyes:

Route between Whittlesea and Yea.

I like that road, joins on to the kinglake rd doesn't it not too far before the old pub?

Apparently pretty dangerous in the wet i've heard in years gone by.

I found some back rd around there just heading out of whitlesea or was i in yarrambat...anyway,

one of the steepest roads iv'e ever come across! like a roller coaster, we went up and down then

back a few times just for fun:)

Ohh nearly forgot, on the way to Yea, there's a turn off on the right to murrindidi

and the old mill, nice couple of kmh's of winding driving there, after the mill all gravel/dirt camping area.

Dandy tourist rd is good except for the tourists.

Like coming down the side heading toward Canterbury Rd.

Like going up via Burwood Hwy and that left hairpin ;)

Off Dandy tourist Rd is Mtn Hwy, that good going up and down, less cars.

Reefton Spur good or is it just past that going out of Reefton?

There's a turn off left you take to Lake Mountain, 100m in front of the turn off is

an access road and a big fence for yarra valley water?

For the flat area.

Some favourite roads are past Wonthaggi going into Tarwin Lower / Venus Bay,

great winding roads and tightening bends with some decent straights with one monster straight :)

v.enjoyable.

And if you game to get lost out the back of Wonthaggi a bit north of Leongatha, some real twisty

up and down all over the shop hills and dales, bit of a steep ascent/decent on a bend here and there it will test you!!

mountain hey is awesome. specially at night its pitch black

I like that road, joins on to the kinglake rd doesn't it not too far before the old pub?

Apparently pretty dangerous in the wet i've heard in years gone by.

I found some back rd around there just heading out of whitlesea or was i in yarrambat...anyway,

one of the steepest roads iv'e ever come across! like a roller coaster, we went up and down then

back a few times just for fun:)

Ohh nearly forgot, on the way to Yea, there's a turn off on the right to murrindidi

and the old mill, nice couple of kmh's of winding driving there, after the mill all gravel/dirt camping area.

Yes spot on.

It is dangerous because the surface is so smooth and not well banked - Just by looking at the sweeping bends - It "seems" you can attack them at close to the speed limit (100km/h) but that's suicide IMHO - change in elevation in turns do not help either - at about 80km/h I can feel slight wash out so I back off to around 70km/h. I'd hate to imagine what its like in the wet.

love that hairpin!! haha

the route from canterbury road is far smoother than from burwood hwy, i've only ever been down towards canterbury but i reckon it would be better to go up

iseekool: just checked out the whittlesea-yea road, looks really good! thanks for the tip :D

Glad you like it.

All this talk of mountain runs got me itching for a cruise :touch:

Maybe when the weather is nicer I might plan a non-official pizza cruise to Yea (and maybe surrounding areas)

keep an eye out for EPA vans and wildlife.

also, cyclists can be absolute flamin mongrels on mt roads. i remember being passenger on a SAU cruise up through king lake. the road was probably 1.5 lanes wide at most, with polls right on the outer edge. we had at least 15 maybe 20 cars on that cruise and we seemed to have caught up with a bunch of cyclists. not one of them pulled over focusing everyone to drive on the wrong side of the road.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I think this is just a product of how the US market works for this stuff. Shops are expensive and there's no real way of knowing what kind of results you're going to get, people don't really have the institutional knowledge. I have heard too much at this point to really put faith in anybody "full service" except maybe DSport and they aren't really a full service kind of shop. If you go to the right place I have no doubt they'll get it right for you. Some locals have set it up right but the cost really is nuts and even now they're still fighting issues. And you know I'm a crazy person who thinks things like twin scroll, relatively short low-mount cast headers, PCV recirc to intake, recirculating BOV, right-sized for ~400 whp, MAF load, validating all of that to a standard comparable to OEM test programs, etc are relevant. For what it's worth, multiple local owners at this point have been stuck in a perpetual cycle of blowing a motor -> getting someone to rebuild it -> some missed detail causes the bearings to wipe and spin just outside of break-in mileage or drop valves or some other catastrophe -> cycle repeats. I usually only find out about this because I'm perpetually helping random friends with diagnosing car troubles, Skyline or otherwise. The single turbo stuff if I'm honest is mostly secondary, it just doesn't seem to achieve the numbers in the ~2000-3000 rpm region that I would expect given the results I've seen here or in Motive's videos. I don't really know what we're missing here in the US to be causing this. Lots of people like to emphasize the necessity of finishing the project first and foremost, but I'm not made of money and I can't afford to be trashing a 15k+ USD engine build with any regularity. Or spending my relatively limited garage time these days unable to triangulate problems because too much was changed all at once. Also, even if it isn't a catastrophic failure I would consider spending the cost of single turbo conversion with nothing to show for it to be pretty bad. 
    • The water pump is know to leak as well. So if the coolant is low checking that first as well as hoses. 
    • Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
    • Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
×
×
  • Create New...