Jump to content
SAU Community

Recommended Posts

Dandy tourist rd is good except for the tourists.

Like coming down the side heading toward Canterbury Rd.

Like going up via Burwood Hwy and that left hairpin :P

Off Dandy tourist Rd is Mtn Hwy, that good going up and down, less cars.

Reefton Spur good or is it just past that going out of Reefton?

There's a turn off left you take to Lake Mountain, 100m in front of the turn off is

an access road and a big fence for yarra valley water?

For the flat area.

Some favourite roads are past Wonthaggi going into Tarwin Lower / Venus Bay,

great winding roads and tightening bends with some decent straights with one monster straight :D

v.enjoyable.

And if you game to get lost out the back of Wonthaggi a bit north of Leongatha, some real twisty

up and down all over the shop hills and dales, bit of a steep ascent/decent on a bend here and there it will test you!!

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Dandy tourist rd is good except for the tourists.

Like coming down the side heading toward Canterbury Rd.

Like going up via Burwood Hwy and that left hairpin :P

Off Dandy tourist Rd is Mtn Hwy, that good going up and down, less cars.

Reefton Spur good or is it just past that going out of Reefton?

There's a turn off left you take to Lake Mountain, 100m in front of the turn off is

an access road and a big fence for yarra valley water?

For the flat area.

Some favourite roads are past Wonthaggi going into Tarwin Lower / Venus Bay,

great winding roads and tightening bends with some decent straights with one monster straight :D

v.enjoyable.

And if you game to get lost out the back of Wonthaggi a bit north of Leongatha, some real twisty

up and down all over the shop hills and dales, bit of a steep ascent/decent on a bend here and there it will test you!!

Those locations sound incredible.

mountain hwy from bayswater to olinda, I do it most weekends

really great road but bye bye car if you make a mistake

...as I found out in my r31

Ouch. I know the feeling. King lake roads + 1am + open cliff face = epic fail.

Route between Whittlesea and Yea.

Very generous speed limit of 100km/h - most of the time you will be doing about 70 to 80km/h. Some nice 90 degree turns and hairpins with changes in elevation - mainly sweeping bends that are very deceiving - don't go at them too quick. Nice surface and very light traffic - but be careful of some wet patches on the road (because of natural springs), falling branches and some tourists heading Mt. Buller way.

In Yea there is this awesome pizza place next to the petrol station. It has some V8 supercar memorabilia on the walls and the pizza is "probably" the best I've tasted.

Dandy tourist rd is good except for the tourists.

Like coming down the side heading toward Canterbury Rd.

Like going up via Burwood Hwy and that left hairpin :rolleyes:

love that hairpin!! haha

the route from canterbury road is far smoother than from burwood hwy, i've only ever been down towards canterbury but i reckon it would be better to go up

seekool: just checked out the whittlesea-yea road, looks really good! thanks for the tip :)

Route between Whittlesea and Yea.

Very generous speed limit of 100km/h - most of the time you will be doing about 70 to 80km/h. Some nice 90 degree turns and hairpins with changes in elevation - mainly sweeping bends that are very deceiving - don't go at them too quick. Nice surface and very light traffic - but be careful of some wet patches on the road (because of natural springs), falling branches and some tourists heading Mt. Buller way.

In Yea there is this awesome pizza place next to the petrol station. It has some V8 supercar memorabilia on the walls and the pizza is "probably" the best I've tasted.

It was great on the bike, winds on forever.

I never see any po-po until the Whittlesea end luckily. :rolleyes:

Route between Whittlesea and Yea.

I like that road, joins on to the kinglake rd doesn't it not too far before the old pub?

Apparently pretty dangerous in the wet i've heard in years gone by.

I found some back rd around there just heading out of whitlesea or was i in yarrambat...anyway,

one of the steepest roads iv'e ever come across! like a roller coaster, we went up and down then

back a few times just for fun:)

Ohh nearly forgot, on the way to Yea, there's a turn off on the right to murrindidi

and the old mill, nice couple of kmh's of winding driving there, after the mill all gravel/dirt camping area.

Dandy tourist rd is good except for the tourists.

Like coming down the side heading toward Canterbury Rd.

Like going up via Burwood Hwy and that left hairpin ;)

Off Dandy tourist Rd is Mtn Hwy, that good going up and down, less cars.

Reefton Spur good or is it just past that going out of Reefton?

There's a turn off left you take to Lake Mountain, 100m in front of the turn off is

an access road and a big fence for yarra valley water?

For the flat area.

Some favourite roads are past Wonthaggi going into Tarwin Lower / Venus Bay,

great winding roads and tightening bends with some decent straights with one monster straight :)

v.enjoyable.

And if you game to get lost out the back of Wonthaggi a bit north of Leongatha, some real twisty

up and down all over the shop hills and dales, bit of a steep ascent/decent on a bend here and there it will test you!!

mountain hey is awesome. specially at night its pitch black

I like that road, joins on to the kinglake rd doesn't it not too far before the old pub?

Apparently pretty dangerous in the wet i've heard in years gone by.

I found some back rd around there just heading out of whitlesea or was i in yarrambat...anyway,

one of the steepest roads iv'e ever come across! like a roller coaster, we went up and down then

back a few times just for fun:)

Ohh nearly forgot, on the way to Yea, there's a turn off on the right to murrindidi

and the old mill, nice couple of kmh's of winding driving there, after the mill all gravel/dirt camping area.

Yes spot on.

It is dangerous because the surface is so smooth and not well banked - Just by looking at the sweeping bends - It "seems" you can attack them at close to the speed limit (100km/h) but that's suicide IMHO - change in elevation in turns do not help either - at about 80km/h I can feel slight wash out so I back off to around 70km/h. I'd hate to imagine what its like in the wet.

love that hairpin!! haha

the route from canterbury road is far smoother than from burwood hwy, i've only ever been down towards canterbury but i reckon it would be better to go up

iseekool: just checked out the whittlesea-yea road, looks really good! thanks for the tip :D

Glad you like it.

All this talk of mountain runs got me itching for a cruise :touch:

Maybe when the weather is nicer I might plan a non-official pizza cruise to Yea (and maybe surrounding areas)

keep an eye out for EPA vans and wildlife.

also, cyclists can be absolute flamin mongrels on mt roads. i remember being passenger on a SAU cruise up through king lake. the road was probably 1.5 lanes wide at most, with polls right on the outer edge. we had at least 15 maybe 20 cars on that cruise and we seemed to have caught up with a bunch of cyclists. not one of them pulled over focusing everyone to drive on the wrong side of the road.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
    • This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
    • Wives never seem to find things funny. Especially when they're trying to sleep, and you've found the new funniest thing ever. I've never seen someone be able to get try and be cranky with me, while they're holding back fits of laughter... 😛   Also, I tell mine it's payback anyway. She has BiPolar. So the household can get quite emotionally wild at times 😛
    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
×
×
  • Create New...