Jump to content
SAU Community

Skyline Roll Cage.

Risking
 Share

Recommended Posts

Risking Grand Master

Risking

Posted
Posted (edited)

Long story but I bent this kit cage up for a mate of mine who wanted a cage for his r32 GTR. However the car has been written off and his not in the position to have it fitted etc anymore. So I'm selling it to recoupe some of the money on his bahalf.

The cage currently includes

- 44od CDS mandrel bent main hoop, single diagonal one horozontal

- 44od CDS front legs, follow the a pillar will require some tweaking to sit perfectly on the pillar

- 44od CDS rear legs, long enough to reach shock towers or wheel arches

- 38od CDS single roof diagonal

Windscreen support

Rear cross for rear legs

Full X style intrusions

Rear harness bar with machined eyelet bosses

Front leg to main hoop supports

Rear leg to main hoop supports

- pre cut floor plates and mounts

- extras like dash bar and full hoop cross an easily be added during assembly

this is all raw material precut to length. To fit it into the car you will need to have everything knotched and welded in etc.this is not a bolt in or DIY cage.

All material is from racetech steel, I can supply an MDS and documentation for the steel.

Any bends are mandrel and within cams rules.

If welded and assembled properly it is a cams approved design.

Asking $1350 pick up from Sydney. This is a top quality cage not some cheap shitty exhaust shop knock up cage. Material is 2nd to none. If it doesn't sell I'll pay him myself and keep the cage for a rainy day.

I may be able to offer fitting if the car is local and time permiting.

Edited by Risking
Link to comment
https://www.sau.com.au/forums/topic/333323-skyline-roll-cage/
Share on other sites
  • 1 month later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...