Jump to content
SAU Community

Pictures Of Fmic With Stock Front Bar R33 S1.

r33canada

By r33canada,
in Engines & Forced Induction

 Share

Recommended Posts

r33canada Community Regular

r33canada

Posted
Posted

i was just wondering how many of you have thrown a front mount on there r33 but still using the series 1 front bar.

not series 1.5 im looking for s1.

id love to see some pictures and details on how difficult it was with the stock bar.

thanks!

reference is my car,,, ugly s1 bumper :)

post-61916-1282210501_thumb.jpg

ARTZ Grand Master

ARTZ

Posted
Posted

I like s1 bumper, its so..............plain....

Not too difficult,you will have to trim some of the bar, the side scoops mostly to clear pipes and a little out of the middle but not much..biggest problem i reckon is the aircon fan gets in the way so you need to cut the reobar...maybe a smaller fan or something could solve this, i just disposed of the aircon instead... :)

But yeah if you can be rid of that fan somehow its an easy fit...

But if your careful you can squeeze it in so neatly you can hardly notice it

if you want it noticed however,best to get another bar...

89CAL Grand Master

89CAL

Posted
Posted

you might have to angle the intercooler a bit to miss some stuff

Mine had to be angled a bit to clear the driving light/indicator assembly and the A/C fan.

best thing to do is just to take the front bar off, mount the intercooler then trial fit the front bar till you get the intercooler at the right angle and trim the front bar enough for everything to fit nice

basically trial and error, best way

WYTSKY Veteran

WYTSKY

Posted
Posted

Mines one of the big fmic's and quite thick.

I didnt do it, a workshop that does not exist anymore did, but they barely shaved anything off it. didnt look so hard to do, mind you I didnt know much about my car at that stage.

you can barely notice it, cops have to stick their heads under the license plate to see it. I rekon it looks good. :)

I think yours is the factory front bar and mine is the factory body kit? not 100% sure...

SL370681smaller.jpg

3321765505_503c3783fd_o-1.jpg

SL370746smaller.jpg

89CAL Grand Master

89CAL

Posted
Posted

You have M-Spec and the OP just has the normal front bar :)

My S1 Front bar had working driving lights (which from what I've heard is pretty rare) so they were in the way thats why my cooler was angled lol but anyway

Series 2 front bar is much nicer to put a FMIC behind, Requires a fair bit of trimming but only of parts that you cant see

andymoocow Grand Master

andymoocow

Posted
Posted

there are also plenty of return flow front mount intercooler kits that you can use which sit very well as they use the stock intercooler pipes in the engine bay.

I have a BLITZ LM Return flow one, but i have a series 2 front bar, sits perfectly flush and its black too so does not grab any un-necessary attention.....

Just a thought. Oh yeah and you dont need to cutt any holes in the engine bay, just a slight few cms off the back of my front plastic bar and thats it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...