Removing Rotor - 36mm Nut Stuck

[Owgasm]

Hey,

Had a bit of a problem yesterday and one of my studs snapped.

So I got some new nismo longer ones waiting to go in.

I've got aftermarket rotors and brakes, so i'm not sure how different it all is.

The problem I have is, the 36mm in the centre of the rotor wont budge.

I'm not sure if you need to take this off to take the rotor off, but it looks like it could be holding it in.

I extended my pole to at least a metre and the 36mm nut wouldn't even move.

Have you guys got any info/previous solutions/problems?

I soaked it in WD40, hopefully it'll let go today.

Thanks in advance for any help.

Cheers

Simon

[badhairdave]

remove caliper, remove rotor.

The 36mm nut just holds in the driveshaft and does not need to be removed

[Owgasm]

Thanks for that.

I'll give it a go.

Calipers off, the rotor wont move though. I'll try again with a hammer on the studs and try to get it off.

Hand brake off and not in gear.

[Duncan]

there should be 2 threaded holes in the disc, these are for screwing a bolt in to force the disc off the hub - M6 bolt from memory.

if the disc is being stubborn use those

[RBJETT]

plus 1 for the bolt idea. had to do this to get my rotors off.