Jump to content
SAU Community

Recommended Posts

I have finally have my GTR on the road again so have no need for my temp track car. I has been a joy to drive and put many other cars to shame. It has been resprayed in 2 Pac Nissan R34 GTR Bayside blue by Joe at Pro Finish Custom Painting, unfortunately I have scratched the rear bumper, bonnet, drivers guard and front bumper. Bad enough that it should be painted over. There are no dents in the pannels however just scratches. There is much good news about this car though. The motor was rebuild at NISSPEED 6months ago and has the following specs:

Full Blue print assembly

Balanced (pistons, rods, crank, flywheel and clucth, harmonic)

Forged Wiesco pistons (1.5mm over for more capacity)

Forged Eagle Rods ARP cap bolts

NDC bearings

New Lifters

Gold 2 pac rocker cover

ARP head studs

Adjustable cam gears

Steam pipe 4-1 exhaust manifold

Haltech F9 ECU

OEM Ignition (knock feedback and retard)

EVO 9 injectors

Walbrow 255 intank pump

Custom Modified OEM side facing Plenum- This setup with the intercooler provides a very short and direct inlet track for minimal lag and very crisp trootle response.

Water to Air Long Flow Intercooler with Alloy radiator and electronic pump also remote alloy water filler

R33 GTST Series 2 Turbo (ceramic turbine wheel, Carbon composite Compressor-very responsive)

Heavy Duty Organic Clucth (holds well and is kinder on the gearbox)

Gearbox from a 626(pretty sure internals are no stronger but ratio's are better for the track) filled with redline Shock proof oil.

ARD Approved Winged racing seats (ADR forms in the glove box)

Full 3" Exhaust with Magnaflow resi and Muffler(not to loud, just right)

Custom cold air induction and Pod Filter

Front Mount Oil cooler

Familia rear hatch with dual spoilers

Koni damper adj suspension

Adj camber kit

Polished Performance 5 Spoke rims(needs 4 new tyres)

Guages mounted above stereo in dash (boost, oil pressure, oil temp) also led illuminated switches for ACC and ON

Pivot Starter button(lights up blue)

Slotted and Dimpled gold pasivated front discs

Momo millenium style steering wheel (very small)

Power steering

Running and Tuned on E85(99c at litre from seaton united) also has a tune for BP98

Made 207kw and 420nm (at the wheels) before the plenum was modified. Dyno sheets will come with the car. I would expect her to have even more torque now. Cam gears have yet to be played with.

Absolutley Insane and light little machine. Handling in extremmely impressive. Car has been set for slight over steer and 4mm tow out at the front gives nice responsive steering...although on the street bump steer is slightly noticable.

She has been sitting for a coulpe of months and I would love to keep her but I need some cash to fund my other track car. It does need some love and tlc, however only cosmetic. The money, engineering and mods have been spent on all the right things to ensure this is a rewarding and reliable package for years to come.

It needs the following to bring her up to spec:

New set of semi slick tyres (kuhmo KU36)

Paint over scratches( Pro Finish Custom painting- Joe)

add some rego

Neaten up Haltech wiring

also recommend a roll cage

Collinsgrove Hill Climb, Old Motor

Completed the hillcimb as fast as an EVO 10. 3#sec zone. can't remember the exact time

323 At Mallala

Spents well over $10,000

asking around $5,000

Contact me on

0413023669

or SMS that you have sent a PM

Regards,

Matt

Will post up some pics when I get home.

  • 2 months later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...