R32 Gtr - Gtst Parts - Leftovers From Several Cars And Shells

[Rowdyr32]

Help me get my shed back in order. Need to fund a new wakeboard!

HKS VPC. Come with everything. Use this to remove your AFM's on your gtr and still run std or pfc ecu $400 Allows control of fuel mixtures to make your car run safe AFR's. Uses its own Map sensor and inlet temp sensor plus all std motor sensors. Removed to return a GTR back to standard to sell.

Set of front guard liners and front under tray. Has factory front brake ducts and I won't seperate. $150 Getting very rare!

RB26DETT oil pump $80

Box random RB26 bits $50. Need to see whats in there. Won't respond to Pm's about this yet.

RB26 block. Good for coffea table. Has a cracked water jacket into head bolt hole. Could re-use it for a std build without any probs. $50 Didn't use water or oil before disassembly.

R32 GTR fuel pump in cradle $80 each.

R32 3inch exhaust with seperate de-cat pipe. Has centre muffler, no rear muffler, just straight throught to out back $100

R32 GTR body fuel cap/flap $30

R32 GTR ABS mater cylinder $75 Below is another full setup

R32 GTR full ABS system- Master cylinder, ABS unit, All related brake lines $275. Would swap for non-abs setup plus small cash adjustment my way. Still in car and work well. Removing to strip weight for track car.

R32 GTR G-Sensor $100

R32 GTR rear diff and GTR driveshafts. Perfect upgrade for GTST? $450

R32 push type 4 puck solid centre button clutch w/looks like custom pressure plate and std flywheel. In VGC. Appears like it hasn't been used much since new. Heaps of meat $400 lot. Will fit all push type RB series motors.

New R/H sill panel $100 Suit GTR/GTST

R32 R/H tail light $30

R33 GTST original/genuine JUN front bar. In good condition, need a couple little bits of fibreglass. Looks like a 400r bar but better. $250. These are bloody expensive new. Currently in white with blue pearl.

Pair Volk Circlar rims 18x9.5 +38mm offest. $300. One painted spray can black. I know where there is another perfect pair for $500 if needed. These sell for around 1500-2000 set. I can't be bothered.

R43 R/H mirror $25

R33 GTR lowered rear springs for std style shocks $50 sits very nice

Set Tein stiff springs. Perfect for drift. $30

Pair headlights for R32 gtr but will fit gtst. Removed the glass from one body. Stil have it. They have a few broken mounts but still worked fine. $40 pair.

Melbourne 40 min south city. Can post. Please no time wasters. You know who you are!

[skitzs rb26 gtst]

hey mate can i get pics of the jun front bar and would you be willing to post to mackay qld 4740

[cmoney]

Hey mate

Just a bit of info. A while back when the diff in my R32 GTS-T was buggered, i looked at putting in a GTR diff. I didnt do it because apparently my diff is mounted with rubber mounts, while a gtr diff is solid mounted to the body. It was gunna be a lot of work to make it fit.

I was told that by a reputable workshop i take my car to for major works when i dont have time for it myself, hope that helps with that part....

[Rowdyr32]

hey mate can i get pics of the jun front bar and would you be willing to post to mackay qld 4740

I can post it anywhere at your expense. Don't know about frieght prices. Jump on some of the bodykit supplier sites if you want a rough estimate.

Hey mate

Just a bit of info. A while back when the diff in my R32 GTS-T was buggered, i looked at putting in a GTR diff. I didnt do it because apparently my diff is mounted with rubber mounts, while a gtr diff is solid mounted to the body. It was gunna be a lot of work to make it fit.

I was told that by a reputable workshop i take my car to for major works when i dont have time for it myself, hope that helps with that part....

The gtr diff is also rubber mounted. From a quick search it look like you would need GTR hubs. You can still put the GTR diff centre into a GTSt to give it a mech diff.

[jas/slo32]

Just to clarify the 32gtr diff is a staight bolt up (IF) used with a 32gtr subframe,so to fit to a gtst you will need diff,shafts,subframe & hubs as gtst suspension & arms are a direct bolt up to gtr subframe, to use gtr uprights you need gtr rear coilovers.

Just some info since i have done the job before.

free bump

Edited August 23, 2010 by jas/slo32

[skitzs rb26 gtst]

hey mate ill take the front bar if you want to pm me with the exact total including shipping and your payment details

cheers Fritz

[Tim GTR]

Help me get my shed back in order. Need to fund a new wakeboard!

HKS VPC. Come with everything. Use this to remove your AFM's on your gtr and still run std or pfc ecu $400 Allows control of fuel mixtures to make your car run safe AFR's. Uses its own Map sensor and inlet temp sensor plus all std motor sensors. Removed to return a GTR back to standard to sell.

Set of front guard liners and front under tray. Has factory front brake ducts and I won't seperate. $150 Getting very rare!

RB26DETT oil pump $80

Box random RB26 bits $50. Need to see whats in there. Won't respond to Pm's about this yet.

RB26 block. Good for coffea table. Has a cracked water jacket into head bolt hole. Could re-use it for a std build without any probs. $50 Didn't use water or oil before disassembly.

Hi,

Would you sell just the two franges (Tongues) from the GTR32 diff.? I am from Mordialloc 3195 can pick up 0433 878905 Alex

R32 GTR fuel pump in cradle $80 each.

R32 3inch exhaust with seperate de-cat pipe. Has centre muffler, no rear muffler, just straight throught to out back $100

R32 GTR body fuel cap/flap $30

R32 GTR ABS mater cylinder $75 Below is another full setup

R32 GTR full ABS system- Master cylinder, ABS unit, All related brake lines $275. Would swap for non-abs setup plus small cash adjustment my way. Still in car and work well. Removing to strip weight for track car.

R32 GTR G-Sensor $100

R32 GTR rear diff and GTR driveshafts. Perfect upgrade for GTST? $450

R32 push type 4 puck solid centre button clutch w/looks like custom pressure plate and std flywheel. In VGC. Appears like it hasn't been used much since new. Heaps of meat $400 lot. Will fit all push type RB series motors.

New R/H sill panel $100 Suit GTR/GTST

R32 R/H tail light $30

R33 GTST original/genuine JUN front bar. In good condition, need a couple little bits of fibreglass. Looks like a 400r bar but better. $250. These are bloody expensive new. Currently in white with blue pearl.

Pair Volk Circlar rims 18x9.5 +38mm offest. $300. One painted spray can black. I know where there is another perfect pair for $500 if needed. These sell for around 1500-2000 set. I can't be bothered.

R43 R/H mirror $25

R33 GTR lowered rear springs for std style shocks $50 sits very nice

Set Tein stiff springs. Perfect for drift. $30

Pair headlights for R32 gtr but will fit gtst. Removed the glass from one body. Stil have it. They have a few broken mounts but still worked fine. $40 pair.

Melbourne 40 min south city. Can post. Please no time wasters. You know who you are!

[Rowdyr32]

hey mate ill take the front bar if you want to pm me with the exact total including shipping and your payment details

cheers Fritz

I'll have to get a price on shipping and also work out how to pack it so it won't get damaged. You've saved me a heap of hassles and weekends. It was going to get the chop and go on my 32 gtr.

Tim GTR did you forget to write something?

[skitzs rb26 gtst]

to easy bud just let me know how much and how you want me to pay! wow that would have been quiet the mission to fit it to a 32

[Rowdyr32]

Only got to send out one pm tonight before being stopped for some reason and now have to wait another hour to send another one so I'll try again tomorrow.

[Rowdyr32]

Pair Volk Circlar rims 18x9.5 +22mm offest. $300. One painted spray can black. I know where there is another perfect pair for $500 if needed. These sell for around 1500-2000 set. I can't be bothered.

Editted offset to +22

Its only letting me send one pm per hour again so if people can attach email addresses to their pm's it will help speed things up.

[Rowdyr32]

Front bar and fuel pump sold pending payment.

[Rowdyr32]

Pm's replied

SOLD

Jun Bar

Fuel pump

Short shifer

Make some offers if you want while I'm still keen to off load the parts.

[Dr_Drift]

I'll take the diff without the flanges (tongues) that TimGTR wants and without driveshafts if you'll go $150? Just had a pinion bearing go in my Sil80.

[r32-25t]

Hey I'd like a price on the splash guards and brake ducts sent to Sydney

Thanx brett

[Rowdyr32]

I'll take the diff without the flanges (tongues) that TimGTR wants and without driveshafts if you'll go $150? Just had a pinion bearing go in my Sil80.

Won't be seperating it atm. Might be selling the car so I'll use it to keep the AM diff in it.

Hey I'd like a price on the splash guards and brake ducts sent to Sydney

Thanx brett

Not really worth me selling an item for $100 and then have to drive 20mins then back to drop it of in work time.

[Rowdyr32]

Bump

[Rowdyr32]

ABS unit and master sold.

Found a pair of trust gracer style rear pods to suit R32 gtr. Brand new still in primer. Sell for about $160 new

Will sell for $120.

[Single]

mate have you gone threw the parts box yet?

i need the inlet side (2 pipes) on the second turbo, do you have them?

[dave89]

hey mate where are you located? im interested in the block for a coffee table