Jump to content
SAU Community

Fs: R31 Pintara Ca18det Syd Nsw 250kw

UN57BL
 Share

Recommended Posts

UN57BL Newbie

UN57BL

Posted
Posted

hey guys, i know i havet been on here in ages, but i sorta dropped out of the car scene..... i have a 1986 R31 pintara for sale its been modified to suit a ca18 in it.... the motor itself is not by any means standard and has punched out 250kW in my previous car...

specs on car as follows

BODY

standard body

lowered springs

s13 silvia front brake and hub conversion

17inch wheels

other than that it looks completely std, although i have a towbar still on it.. looks cute

the kms on the body say 300, 000 but its a 2nd hand cluster i bought the car with 150, 000 and have the bill of sale fropm dealer to prove it.

ENGINE

CA18DET (forged pistons and rods-i have receipts, with a kometic head gasket)

GT3076R turbo

TOMEI cam gears

TOMEI cams (260 deg 8.8mm lift)

STD plenum, but been modified to suit XF throttle body

BOSCH coils

Vacuum block

CUSTOM high rise manifold.

TIAL 38mm External wastegate with screamer pipe... sounds crazy

450 x 300 x 76 FMIC (cant see it from the front complete sleeper look)

3 inch mandrel bend exhaust with highflow cat and dumpie at the back

oil filter relocationwith cooler (not installed)

INTERIOR

completely std apart from racing seat

ISSUES

strut tops make noise need replacing, thats the only dramas i've had with the car.

im sellin the car to buy a motorbike, as i get my fulls in november im lookin for a big bike and need $$$

all in all the car is very good, i had more plans for it but due to studys i have no more time to spend on it..

it might not look like a show car but it will surprise and scare alot of ppl

dont PM me as im very rarely online sms me wit any questions at any time and i will do my best to get back to you

looking around the $8000 mark but i might be willing to negotiate..

no tire kickers or joy riders, im located in southern sydney near hurstville

regards dom

0406474626

post-73621-1282607980_thumb.jpg

post-73621-1282608024_thumb.jpg

post-73621-1282608066_thumb.jpg

post-73621-1282608123_thumb.jpg

post-73621-1282608161_thumb.jpg

Link to comment
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Lets play a game - What is causing my oil consumption?

      By Dose Pipe Sutututu · Posted

      I am going to chime in here and say that is very bad advice for a built motor, making decent power of 400kW+ Especially if the rings have been gapped on the looser side. The more power you make the heavier you need your oil to be to be able to maintain that suspension between the moving parts, if not you'll have journals and bearings making love and grenade a motor. Remember that all moving parts inside the motor aren't ball bearing and are journal bearings and require oil to separate the surfaces from contacting.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Yeah I noticed this just now. No doubt she will be running smoother next start😂🤣😂
    • joshuaho96
      ENR34 - Leaking Transfer Case

      By joshuaho96 · Posted

      ENR34 manual transmission transfer cases are 33100-23U00 which is shared with all of the R32/R33 GT-Rs and GTS-4s. And the C34 Stagea. Do not bother with automatics, that is a huge effort to swap and the car will be worse for it. And an automatic transfer case does not have the right housing for the shifter which comes out the back of the transmission and goes through the transfer case. I already posted my response on reddit but if you didn't see it there here it is: You have almost certainly damaged the transfer case, the only question is how badly. Nobody can tell you how bad without more information. If you have a giant hole in the transfer case pissing out all the transfer case fluid then you need a new one. If it's not that bad then the only question is whether you burned up the clutches. Drain the transfer case oil and inspect for metal on the drain plug magnet. Small black filings are normal. Big chunks of metal or a ton of black fuzzies not so much. Fluid should be nice and red. Any other color isn't great. If the color is reasonably red and there's not a bunch of clutch material discoloring it or anything like that you probably got away with insubstantial excess wear not worth trying to fix. If you have to rebuild or replace the transfer case keep in mind you have to pull the transmission to get it off.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      As promised………… the first start. Rough and a few bugs to work out. Still she lives att.1cnTUvrWxiOZUFbg0S43m1VFUdDhxGBq3UU53bvtkww.mp4
    • blind_elk
      Lets play a game - What is causing my oil consumption?

      By blind_elk · Posted

      Can I suggest a 15W50 oil is too heavy. Its a brand new engine - you should be able to run something like a 10W30. Shove some steel wool into your catch can  - more technically "oil/air separator" - so that the oil vapour has something to condense on.
×
×
  • Create New...