Jump to content
SAU Community

Recommended Posts

uhuh very true Cris..unfortunately the cure for it doesn't grow on trees :P

Ideally I would like to look at a shift kit, make better use of the power there. I find between 2nd and 3rd the auto box just doesn't keep up that well. I'd sooner do that then look at more power.

I think a shift kit + the plumback BOV will definitely smooth out the power curve.

Then pads will probably be due soon. Anyone who doesn't look at upgrading brakes when doing a NA+t is crazy...extra stopping power definitely doesn't go astray.

Things like LSD I can live without, but would be nice to have.

I really planned to get out to the occasional track day, but I'm really second thinking it with this sort of set up...but if I look at it in the long term, upgraded the auto box, some good pads n later rotors, then in some years to come look at strengthening the bottom end, I will definitely be more confident about pushing some limits.

In the end it all = $$$ and when the housing market is looking so attractive, priorities tend to change a bit.

There are always cheaper answers.

Reshimmed diffs are a FRACTION of the price of LSD's, dont have the cluncking and noise problems either.

GTR diffs are also cheap 2 way upgrades.

You'll be surprised how much of an emprovement good brake fluid is as opposed to upgrading brakes. I Penrite SIN at like $22 a bottle its a Super DOT4 or DOT5 (not exactly sure, could check if your interested) and will dramatically stop brake fade and other common problems.

I try to be as big of a tight arse when i modify as possible. Ill search car yards, second hand parts, forums, e-bay, yahoo auctions everything before I finially decide where to buy what I want and in the end it always ends up a heap cheaper than the commonly asked prices..

Yeah definitely true..unfortunately my actual conversion ran fair bit over budget due to some unforseen things but that happens I guess.

I've got R33 GTSt Brakes, R33 GTSt Brake Master Cylinder, ADR Approved Braided Brake Lines, Motul RBF660 fluid :P Just using what meat was left on the pads and rotors that I got though..but the pads will need changing soon. Probably didn't need to go as far as RBF fluid, but since the brakes were being flushed out I thought might as well do it right to begin with.

TBS Performance do a street/occasional track pad that is very cheap compared to other aftermarket pads...I'm thinking about trying them out see how they go, though I haven't been able to find a lot of info on them though.

ok.. Who has more info on this E85?

Need to know information before I go ballistic with it.

It seems that there is a common theme of " the elimination of bare magnesium, aluminum, and rubber parts in the fuel system. Another is that fuel pumps must be capable of operating with electrically conductive ethanol instead of non-conducting dielectric gasoline fuel" in th need to run E85.

Anyone know where I can read up on Guilt-Toys journey of running it?

And on a uick side note: WTF is the go with this new layout!?! This was a big reason why i loves SAU! It didnt run this stupid layout!

Edited by GTS4WD
And on a uick side note: WTF is the go with this new layout!?! This was a big reason why i loves SAU! It didnt run this stupid layout!

Not sure if this is what you're referring to, but go to the top of the first post on the page, click [Options], then click [switch to: Standard]

Second hand diff - $200

Shims - $30

Diff oil - Depending on what you use

1 arvo in the back yard and your car is out of ction for only a weekend.

If you get the shim thickness correct you have yourself a half decent 2way "style" diff without the cluncking, whirring and chirping in carparks

Second hand diff - $200

Shims - $30

Diff oil - Depending on what you use

1 arvo in the back yard and your car is out of ction for only a weekend.

If you get the shim thickness correct you have yourself a half decent 2way "style" diff without the cluncking, whirring and chirping in carparks

pricing applies to R32 & R33 only lol

R34 GTT 2nd hand diff is like $500!

pricing applies to R32 & R33 only lol

R34 GTT 2nd hand diff is like $500!

lol.. dang.. so I was a little off.. :happy:

Lets face it, who cares about 34's?.. Their the new 33's.. ;)

Arn't the diffs interchangeable? Or swap the centers over?

Had a slightly overdue oil change done today, along with fitting of the Turbo XS BOV plumbed back in, and a few more hours of fine tuning since the last tune was more of a getting it on the road tune. Another guy tuned it this time too I believe.

Result is a much smoother boost curve compared to before. Power wise, it had a fair few runs and max came out at 211.9HP @ around 5600RPM. Boost pressure has improved a lot too since the new changes. Feels a lot smoother and much better and nicer to drive now. The plumback lets out a bit of sound at over 3500-4000 revs...obviously coming on boost a lot earlier that's expected. The gurgling sounds when backing off the throttle have reduced a lot since fitting the BOV as well and just generally it feels a lot better to drive.

i've got a full colour Dyno printout as well now, will try get around to scanning it up at work soon, or I can just upload a photo of it later.

The auto/tiptronic box is definitely what's letting it down in the power delivery though, specially between shifts. Will probably look at a trans cooler and shift kit upgrade later in the future, but for now the next thing will be to get boost/oil temp/water temp gauges. I'll probably rely on the factory oil pressure gauge as I'd sooner have an oil and water temp. All in good timing though.

Feeling much better about the whole conversion now though and will probably just settle for the power it's currently making for the sake of reliability...there's always further down the track where I can do a rebuild and go nuts..it is after all a daily driver.

lol.. dang.. so I was a little off.. :domokun:

Lets face it, who cares about 34's?.. Their the new 33's.. :P

Arn't the diffs interchangeable? Or swap the centers over?

not sure about the centres, ive enquired but noone really answered. even if it does fit, the ratios will be off. only similar ratios i know of is from a S15 auto (whole housing can be swapped).

nate, boost it up to 12 psi and off you go :banana:

haha

lol sure thing :domokun: haha

I've actually had the check engine light start coming on a few times now, only started this arvo though.. Basically if backing off the throttle and braking/slowing down from load, it comes on for a bit, or if coming down hill just letting it roll and braking to control speed the light will come on till i apply throttle again. And now when idling, after putting it into park, and the revs settle the light comes on till i rev it again... Remembering this only started this arvo, and I got it back from retuning and fitting the BOV yesterday arvo and have driven it around the same way with no engine light till now.

It's late in the evening so I can't exactly make the phone calls that I need to right now as it's this time of the evening and no one's in the workshop.. Just not sure if this sounds okay to drive on the weekend..

Yeah eventually...they're nothing special at the moment lol And the gearbox lagginess bewteen 2nd and 3rd at around 3-4k revs is starting to annoy me >_>

Meanwhile my engine check light hasn't come up since! Spliftire coilpacks on the way soon too :D

dam, after reading this.

time for me to start collecting parts hey.

since all the info are here thanks to you guys. i just need to do the leg work. lol

im still quite unsure if i turbo my DE. what would be the best ecu? my r33 is auto but going manual in a few weeks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, all the crude is used for fuels and petrochem feedstocks (pesticides, many other chemicals, etc etc). But increasingly over the last few decades, much of the petrochem synthessis has started with methane because NG has been cheaper than oil, cleaner and easier and more consistent to work with, etc etc etc. So it's really had to say what the fraction either way is. Suffice to say - the direct fuels fraction is not insigificant. Heavy transport uses excruciatingly large amounts. Diesel is wasted in jet heaters in North American garages and workshops, thrown down drill holes in quarries, pissed all over the wall to provide electricity to certain outback communities, etc etc. Obviously road transport, and our pet project, recreational consumption camouflaged as road transport, is a smaller fraction of the total liquid HC consumption again. If you're talking aboust Aussie cars' contribution to the absolute total CO2 production of the country, then of course our share of the cubic mile of coal that is used for power generation, metallurgy, etc adds up to a big chunk. Then there is the consumption of timber. Did you know that the production of silicon metal, for example, is done in Australia by using hardwood? And f**king lots and lots and lots of hardwood at that. Until recently, it was f**king jarrah! There are many such sneaky contributors to CO2 production in industry and farming. NG is used in massive quantities in Australia, for power gen, for running huge water pumps (like, 1-2MW sized caterpillar V16 engines running flat out pumping water) for places like mine sites and minerals/metals refineries. And there are just a huge number of those sort of things going on quietly in the background. So NG use is a big fraction of total CO2 production here. I mean, shit, I personally design burners that are used in furnaces here in Oz that use multiple MW of gas all day every day. The largest such that I've done (not here in Oz) was rated to 150MW. One. Single. Gas burner. In a cement clinker kiln. There are thousands of such things out there in the world. There are double digits of them just here in Oz. (OK< just barely double digits now that a lot of them have shut - and they are all <100MW). But it's all the same to me. People in the car world (like this forum's users) would like to think that you only have to create an industrial capability to replace the fuel that they will be using in 10 years time, and imagine that everyone else will be driving EVs. And while the latter part of that is largely true, the liquid HC fuel industry as a whole is so much more massive than the bit used for cars, that there will be no commercial pressure to produce "renewable" "synthetic" fuels just for cars, when 100x that much would still be being burnt straight from the well. You have to replace it all, or you're not doing what is required. And then you get back to my massive numbers. People don't handle massive numbers at all well. Once you get past about 7 or 8 zeros, it becomes meaningless for most people.
    • @GTSBoy out of the cubic mile of crude oil we burn each year, I wonder how much of that is actually used for providing petrol and diesel.   From memory the figure for cars in Australia, is that they only add up to about 2 to 3% of our CO2 production. Which means something else here is burning a shit tonne of stuff to make CO2, and we're not really straight up burning oil everywhere, so our CO2 production is coming from elsewhere too.   Also we should totally just run thermal energy from deep in the ground. That way we can start to cool the inside of the planet and reverse global warming (PS, this last paragraph is a total piss take)
    • As somebody who works in the energy sector and lives in a subzero climate, i'm convinced EV's will never be the bulk of our transport.  EV battery and vehicle companies over here have been going bankrupt on a weekly basis the last year. 
    • With all the rust on those R32s, how can it even support all the extra weight requirements. Probably end up handling as well as a 1990s Ford Falcon Taxi.
    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
×
×
  • Create New...