Jump to content
SAU Community

Recommended Posts

Ramps to drive up on when working on car etc etc $50

24082010170.jpg

Phone/Fax/Answering machine

• Plain paper thermal transfer fax

• DECT cordless handset

• Digital answering system

Click on link below for all features

http://panasonic.com.au/products/details.cfm?objectID=367

Used for less then a month, in original condition. It has been sitting in shed with no use anymore. Also comes with space cartilage as seen in pic

$170 or make an offer

24082010171.jpg

24082010172.jpg

Telstra Phone

Vintage by now but one of the best phones ever

$50 with manual and box and all

24082010173.jpg

Double bed frame

Selling due to upgrade

Make an offer but will put $60 just for the rules

24082010174.jpg

24082010175.jpg

Spalding Punching bag

NEVER used, just got dust on it front sitting there

$60

24082010167.jpg

PRICES ARE NEGOTIABLE BUT NOT ANYTHING STUPID LIKE 1/2 OF WHAT ITS ADVERTISED FOR

LOCATED IN PARKVILLE VIC NEXT TO MELB ZOO

SMS/CALL: 0423 740 146

Still have the car ramps sami?

yes dush it is bro, let me know

hey mate interested with the bed frame.. can it fit into a corolla hatch? or could you deliver to 3132?

its 4 pieces and should fit if there is no passenger. to be honest im too lazy to take it anywhere. also it has supports for the middle part too. i just slapped it together for a pic

hey man how heavy is the punching bag? sms on 0412054982

cheers

d

i'd say just under 20kg and 32 inches

sms sent

  • 2 weeks later...
hey mate interested if you could dismantle it and give me the measurements of it.. so i could see if i can get it fitted into a hatch..

sorry dude kinda forgot haha

the biggest piece is 95 X 138 cm

2 are that size and 2 are smaller

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
×
×
  • Create New...