Jump to content
SAU Community

anyone got one of these need one bad!

stimps

By stimps,
in Wanted to Buy

 Share

Recommended Posts

stimps Collaborator

stimps

Posted
Posted

Does anyone have one of these? I need one pretty badly....

Got a twin turbo car to finish putting together...

phone or leave a message 0408 062 867

I need the small bit of pipe that belongs at the end of the red arrow.

needed.jpg

Link to comment
https://www.sau.com.au/forums/topic/33416-anyone-got-one-of-these-need-one-bad/
Share on other sites
Revhead Grand Master

Revhead

Posted
Posted

Good luck in your search, but if it were me I'd just make one up.

Get a 2" bend (or whatever side the pipework is) and some steel plate, weld it up and it's all done. Use stainless or powdercoat to avoid flakes of rust in your intake.

stimps Collaborator

stimps

Posted
  • Author
Posted

well i would make one, but do you know how hard it is to make something fit between two solid objects? like its not a fitting that can move or flex a bit, its a peice that must be bolted between two objects that are themselves bolted to the block. No room for movement. To make it, id have to tack weld it together on the engine, and I cant do that (useing the welder at work)

so you see why i must buy it:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      Took it to all Japan day, flogged the hell out of it and took it all, am a very very happy man  don’t know how that ended up in Greg’s thread before
    • ARB26
      Stagea 260RS seats

      By ARB26 · Posted

      Hey Nismo, any chance in the world you still have these seats?
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
    • WMDC35
      Tomei gasket

      By WMDC35 · Posted

      Are you sure the gasket is blown? What are the issues? Thermocure is the only flush I've seen do anything with rust, very impressed with that, Prestone, rust will be by the pool having a cigarette.  
    • MBS206
      Tomei gasket

      By MBS206 · Posted

      And since the flush you have a blown head gasket? Have you lifted the head off yet?
×
×
  • Create New...