Jump to content
SAU Community

Recommended Posts

Got my car tuned a few days ago and have had a day or two to drive it around and feel the rush of power I was anticipating.

It does go really really good and makes 315kw at the wheels, having never owned a 300kw+ car before I was expecting it to make me feel like the drivers seat was going to snap off, but it's just not floating my boat as much as i thought it would.

So now I don't know whether to chase some bigger numbers or work with what I've got for now.

Spec

Engine is unknown but been told by previous owner its a forged rebuild

N1 turbo's

650cc injectors

2.5" stainless dumps into full 3" exhaust.

Is 350kw going to feel that much better or do ya need to go for the 400kw mark to really feel like the afterburners are firing????

Link to comment
https://www.sau.com.au/forums/topic/334210-where-is-the-wow/
Share on other sites

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

What was your previous power level? If you went from say 200awkw to 300+ (measured on the same dyno) you should certainly feel it.. but if you had high 200's already then obviously the difference is less pronounced.

Also, are you getting all those 315kw to the ground alright, how's you traction levels? Perhaps try borrowing a set of semis off someone and see how those feel?

And as the old saying goes, "more power is never enough" :blink:

Try this:

2nd or 3rd gear, cruise up to about 3-4k rpm, then slam your foot right down, floor it, with 315wkw and AWD, if you don't feel the massive pull, then you have problems my friend haha

my car's only got about 200kw at all fours, and if I do the above, it sends me hunting for the other lane, the sudden rush of torque is insane.

I think the problem is your power curve is very progressive, as mentioned the N1 turbos are designed for an almost linear power curve with no lag at all, so you don't feel an aggressive surge of power as most big single GTRs would...

He is in a GTR, there shouldnt be traction problems with 300rwkw!

N1 turbos, if R33/R32 items - laggy POS's for the power they deliver unfortunately, so if thats the case then thats sorted out as to why:)

Put a set of Garrett -9s on there and for the same power, it'll all be all on maybe 1000rpm earlier, even more perhaps.

Also remember GTR's are quite heavy. 280rwkw in my 1450kg car feels similar to a GTR with 330rwkw and what, 1650kg?

When i was coming out of a corner, full throttle from 4000rpm with a sorted 330rwkw in a GTR - certainly some G forces goin on!

The difference is never as big as you'd expect, when i went from 285rwhp to around 440rwhp in my r33 gts-t i thought it would knock my socks off.. was rather disappointed, especially after all the hype you hear about 300rwkw cars. I suppose things never quite live up to the hype. I'm hoping the 500rwhp mark will be a little more exciting.

Jarrod

its the torque that you feel

I would also add that its the 'change in torque' that gives you that holy crap feeling. So a turbo with more lag will have a greater change in torque and give you more of a rush.

Some people like the responsive linear fast track car sort of power and some people like the nothing nothing oh holy crraaaappp feeling. I think its personal and what you use the car for.

I remember someone on this forum posting about going for a ride in the corvette ZR1, he said it felt quick but not mind blowing until he looked down at the speed. A car with constant torque will be very fast and be better at achieving traction but tends to not give that 'rush' feeling.

Bit more than that mate.

Bigger wheels, larger exhausts & so on, passengers, fluids etc.

R33's certainly tip a lot more than 1500kg

From the always perfect wikipedia (all are curb weights):

R32 GTR: 1430kg

R32 GTR V Spec: 1480kg

R33 GTR: 1540kg

R33 GTR V Spec: 1550kg

R34 GTR: 1540kg

R34 GTR V Spec: 1560kg

Interesting topic.

Mine at 262rwkw was a real blast to drive and was like a sling shot when it came on, you really felt that feeling in your pants that the car was flying. Then you get used to it and it doesn't feel fast anymore. Maybe you've built up this image in your head of what to expect which was more than it could give and now the reality is setting in?

its the torque that you feel

I wish people would stop saying things like this, torque and power are directly related, at a given rpm with a given power level, you will always have the same amount of torque and vice versa.

You feel the acceleration, this is caused by power OR torque, they are both the same thing when you are talking about acceleration.

I would also add that its the 'change in torque' that gives you that holy crap feeling. So a turbo with more lag will have a greater change in torque and give you more of a rush.

This is pretty much correct except change in torque is identical to change in power, basically where there is the biggest slope in the dyno graph is where you will feel the biggest punch in your back.

^^^^

yes and no...

Torque is the derivative of power with respect to RPM. I.e. Torque x RPM = power (sorta...), like talking about position is torque, then speed is power. Same sorta relationship. So it's pretty erroneous to talk about power when talking about acceleration, because power is a rate of energy usage, not a force.

He is in a GTR, there shouldnt be traction problems with 300rwkw!

N1 turbos, if R33/R32 items - laggy POS's for the power they deliver unfortunately, so if thats the case then thats sorted out as to why:)

Put a set of Garrett -9s on there and for the same power, it'll all be all on maybe 1000rpm earlier, even more perhaps.

Also remember GTR's are quite heavy. 280rwkw in my 1450kg car feels similar to a GTR with 330rwkw and what, 1650kg?

When i was coming out of a corner, full throttle from 4000rpm with a sorted 330rwkw in a GTR - certainly some G forces goin on!

Traction is definantly not a problem and if the older generation N1's are naturally laggy that would explain a few things.

The power is like flicking a switch in 1st gear....Waiting waiting waiting... then BOOM its all on!

I guess I was expecting that in 2nd and 3rd aswell, that rush of Big Bore bike acceleration that I used to have in my Hayabusa days.

Makes 280rwkw@13psi and 315rwkw@19psi.

I guess these turbo's are at their limits so if they are older style N1's I might be in the market for an upgrade.

Would the -7's be that much better to warrant the expense?

From the always perfect wikipedia (all are curb weights):

R32 GTR: 1430kg

R32 GTR V Spec: 1480kg

R33 GTR: 1540kg

R33 GTR V Spec: 1550kg

R34 GTR: 1540kg

R34 GTR V Spec: 1560kg

Ye, so easily 1600+ with driver, wheels & heavier exhausts etc.

Traction is definantly not a problem and if the older generation N1's are naturally laggy that would explain a few things.

The power is like flicking a switch in 1st gear....Waiting waiting waiting... then BOOM its all on!

I guess I was expecting that in 2nd and 3rd aswell, that rush of Big Bore bike acceleration that I used to have in my Hayabusa days.

Makes 280rwkw@13psi and 315rwkw@19psi.

I guess these turbo's are at their limits so if they are older style N1's I might be in the market for an upgrade.

Would the -7's be that much better to warrant the expense?

Sounds exactly like how R33/R32 N1's deliver. For their time they were ok, but turbo tech has come a long way and improvements are signifigant.

Better wheel combination, ball gearing etc etc.

If you dont have cam gears fitted/setup, then you could potentially make it a "bit" better but it wont be fixing your issue overall i dont feel... but a good gain none the less in response.

So i guess the "wow" isnt there because its not going to be. Try and find a user on here with a 300-330rwkw -9 / GT-SS setup and go for a run in that and see if that is more what you want and go from there i reckon.

You want -9's, not 7's. 7's are a useless item these days really as the -9 superseed them in everyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Any number of different ways. Have the coils draw sufficient current to provide contact wetting. Use different contacts in the switch, either by material or design, better suited to the low current drawn by a relay coil. Etc.
    • Hmm, how does the R34 manage to have headlight relays then without getting excessive carbon buildup on the headlight switch contacts?
    • Not R7R. Meant to type R&R, obviously enough.
    • Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
×
×
  • Create New...