Jump to content
SAU Community

Recommended Posts

dunno if its just me but the sensation of 300rwkw in a GTR is peanuts compared to what u feel in a 300rwkw GTS-T

the weight definately comes in to play

then there is the power delivery of the turbo(s)

and i'm pretty sure the AWD has an effect too... dunno if its just me but I seem to feel the rush more in RWD cars compared to AWD ones

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

.

Makes 280rwkw@13psi and 315rwkw@19psi

Obviously boost is tapering off up top with the 19psi tune - otherwise you'd be making at least 330rwkw judging from your 13psi tune.

I agree that the rush feeling usually comes from the mid-range torque and yours should be decent, say~590nm. Considering torque to weight though and that would only be a touch more than my GTST on 1 bar. So I can relate to that fast, but not THAT fast feeling.

My personal rule is you need a 20% increase in torque for it to feel substantially different - but that is HIGHLY subjective.

10% improvements you clearly feel but it's not a big leap.

5% improvement you only feel if you are attuned to it.

A 20% midrange difference is almost exactly that between your 13psi and 19psi.

A 10% midrange difference you can test by comparing between 16psi and 19psi.

If you had that 10 or 20% increase again would it be sufficient? If you think so then a E85 tune might be for you, complete with slightly bigger turbos and much bigger injectors/fuel pump. Otherwise you'll need to pump 22 or 25psi into that thing with some bigger turbos.

Then again, perhaps only a slightly higher torque but over the wider range might just do the trick. Hence the garrett consideration. Did I just talk in circles?

my 5cents (soon to be 10c)

hmm... my car still makes me smile when I open it up... 360rwkw and no traction issues whatsover (unless you clutch dump at 8000+rpm)

you really benefit from the extra traction a GTR has when changing hard from 1st to 2nd... the old GTSt used to spin the rears for a moment which would blunt acceleration a little... however the GTR almost breaks your neck

RWD is more fun as it hunts for traction and squirms around under power, but the G's created by wide tyres and AWD make for more of a push in the seat

when bored of the power just go E85... I'm going to for shits and giggles;)

its the torque that you feel
I wish people would stop saying things like this, torque and power are directly related, at a given rpm with a given power level, you will always have the same amount of torque and vice versa.

You feel the acceleration, this is caused by power OR torque, they are both the same thing when you are talking about acceleration.

You do realise that you took exception to "it's torque that you feel" and then said they're both the same thing?? :wacko: wat.

They're not the same thing. Torque is an instantaneous force. It is what you feel. Acceleration is the byproduct of a force. Torque is closely linked with power as you say but you don't go "wow I really felt the kinetic energy of my car increase over the last second" you say "wow my butt is being pushed into the seat". That force is produced by torque. Torque provides a force on the driving wheels which produces acceleration (it becomes a linear force at the tyre/road boundary). The engine is doing work to achieve this and the net result over 1 second is your power figure.

It definitely comes down to torque delivery. If you get a hard hit of boost (and torque) in the midrange then it feels like a big rush. If your turbo is very progressive and linear then you don't get the same smack in the back it's more of a smooth push.

I should have Clarified that the power figures were high(19psi 315rwkw) and low(280rwkw) boost settings not progressive increase in the one run.

From 2000RPM start in 3rd it hits full boost(19psi) at 4200RPM.

really starting to think about some new Garretts now....... Wife says "Thanks alot"...NOT!

Thats the weight :D

My car's acceleration, coupled with 4.3 diff is absolutely savage for only 280rwkw if im lucky enough to hold traction (its borderline)

i agree, light with high diff ratio is the way to go if you want that feeling of psycho acceleration.

really starting to think about some new Garretts now....... Wife says "Thanks alot"...NOT!

Hahaha I bet

From reading about what you think of the N1s, -7s will just give you more response but not much more top end. You wont get much more of a 'thrill'. I think you should go the -5s. It sounds like your all about the rush and perception of a fast car. -9s are a great overall solution but it sounds like you dont track your car and want the max straight line thrill.

It must be hard to get a car to give you the thrill of a big bike.

Info from PaulR33's signature:

Garrett 2860R-7's 0.42a/r (60.0mm) compressor 0.64a/r rear (HKS GT-SS equiv) = 300 to 330rwkw range

Garrett 2860R-9's 0.42a/r (59.4mm) compressor 0.64a/r rear (HKS GT-SS equiv) = 300 to 330rwkw range

Garrett 2860R-5's 0.60a/r compressor 0.64a/r rear (HKS 2530 Equiv) = 360 to 420rwkw range

Garrett 2871R-10's 0.60a/r compressor 0.64a/r rear (HKS GT-RS Equiv) = 440rwkw to 500rwkw

Edited by Harey
Build the motor tough, add GTRS's, e85, 25psi and grippy tires.

You'll feel the rush then

If the wife doesnt like the sound of upgrading to Garrett turbos, I am not sure if she will like the sound of that! hahaha

definetely need to experience that

can i be in the passenger seat sometime?? :)

DONT DO IT!!! Then you will have the same problem as Turbo Dave because then anything less than that wont feel fast anymore!

Edited by Harey
Thats the weight :)

My car's acceleration, coupled with 4.3 diff is absolutely savage for only 280rwkw if im lucky enough to hold traction (its borderline)

thats an alternative, put a shorter diff in it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it    Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher      I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...