buzz350 Posted September 25, 2012 Share Posted September 25, 2012 1, have new radiator handy 2, buy tectaloy xtra cool gold (green colour and concentrate - mix with rain water or distilled) found at sprints or supercheap - this is what I personally use and works a treat other people use different brands etc. 3, make sure you have a drip tray to catch coolant 4, have car on jack stands for easier access or ramps 5, take off radiator cap 6, get underneath car, undo bottom radiator hose, let drain, also make sure your not in its firing line 7, if theres auto trans lines to radiator, clamp them with brake hose clamps 8, remove hoses, minimal auto trans fluid should leak away 9, undo all other hose lines etc 10, remove top brackets + any electrical (if there is) 11, remove radiator - double check to ensure radiator is exact match. then do the reverse. hope this helps. ps should also be guidelines on back of coolant bottle for mixing ratios. *note* tho that you may need to top up automatic trans oil level if there are automatic trans lines connected to radiator. Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6550321 Share on other sites More sharing options...
maklaw Posted September 25, 2012 Author Share Posted September 25, 2012 Yeah car is Auto so should be line attached with Radiator,hope not to loose much transmission oil.That's great help my friend, now i have to keep eye on transmission oil level as well. Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6550346 Share on other sites More sharing options...
buzz350 Posted September 26, 2012 Share Posted September 26, 2012 it shouldnt be a problem, if you clamp the hoses. just go to your mechanic and ask him if it needs a topup or not (should still be fine as ive done a few radiators with auto trans lines added to them) Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6552210 Share on other sites More sharing options...
maklaw Posted September 26, 2012 Author Share Posted September 26, 2012 Yeah man i have changed radiator today with your advise all went well. i didn't lose much trans fluid bcoz it was in my mind.all went well,thanks again.cheers Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6552449 Share on other sites More sharing options...
ThE34 Posted September 28, 2012 Share Posted September 28, 2012 is your r33 red lol i had a red 1 about a year ago my door keept on locking up Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6555273 Share on other sites More sharing options...
ThE34 Posted September 28, 2012 Share Posted September 28, 2012 3 TOP tools u need to fix a skyline or any import 1. zip ties 2. duct tape 3. silicone lol Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6555282 Share on other sites More sharing options...
maklaw Posted September 28, 2012 Author Share Posted September 28, 2012 i got mine more then 2 years so urs gone to someone else... Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6555530 Share on other sites More sharing options...
maklaw Posted January 23, 2013 Author Share Posted January 23, 2013 Hello friends i need some help,2011 i changed timing belt and seals on my R33 gts-t. from last few weeks i got little oil leak in engine arond the crack seal area and i took car to the same mechnic for check and he said its seem like its crank seal leaking. do you guys think crank seal leaked after 15000 km ?? he asking $300 for repair..is it right amount ?? please help me out..if you know some good mechnic and give me some idea about the price that will be great..right now i am on tight budget..thanx Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6720016 Share on other sites More sharing options...
Krishy Posted January 23, 2013 Share Posted January 23, 2013 Give a call to Shaun at boostworx and see what he says in regards to pricing Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6720231 Share on other sites More sharing options...
Carbon 34 Posted January 24, 2013 Share Posted January 24, 2013 Hello friends i need some help,2011 i changed timing belt and seals on my R33 gts-t. from last few weeks i got little oil leak in engine arond the crack seal area and i took car to the same mechnic for check and he said its seem like its crank seal leaking. do you guys think crank seal leaked after 15000 km ?? he asking $300 for repair..is it right amount ?? please help me out..if you know some good mechnic and give me some idea about the price that will be great..right now i am on tight budget..thanx Crank seals can leak in ten min of installed wrong or crank floating around Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6721263 Share on other sites More sharing options...
maklaw Posted February 14, 2013 Author Share Posted February 14, 2013 Hey guys could you please check this mechnic bill/worksheet and suggest me it is right.... Work Done. 1.Remove all belts,timing covers and timing belt. 2.Remove cam and crank gears. NO LEAK FOUND 3.Clean all removed parts and De-grease engine,with cover off also. 4.Tighten cam cover gasket down and re-check all ok.. IF LEAK CONTINUES -WE MAY NEED TO REPLACE CAM COVER GASKET.. final bill $275... Now guys tell me what to do,oil leak still there..i asked same time when i went to pick car why you didnt changed cam gasket if its fu888ked...oil leak still there...so do you guys think he going to charge me again... how much time he need to change CAM COVER GASKET?? PLEASE ADVISE ME AS YOU DID IN PAST. Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6750853 Share on other sites More sharing options...
Tangles Posted February 15, 2013 Share Posted February 15, 2013 for labour the bill sounds right, BUT they should have replaced the gasket if there was any doubt about how worn it was. They didnt, because they want you to pay up, experience the problem again, then come back for more charge$. Go see Shaun at Boostworx Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6752420 Share on other sites More sharing options...
R33 Sleeper Posted February 15, 2013 Share Posted February 15, 2013 if its just cam cover gaskets you should give it ago yourself, not a very hard job at all, just takes a while to get to them because of the hoses/piping thats in the way, def save yourself some dosh Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6752462 Share on other sites More sharing options...
maklaw Posted February 17, 2013 Author Share Posted February 17, 2013 My mechenical knowledge not that high to try myself,i booked same guy on monday.he said he will put cam cover gasket,but didnt mentioned about money and i didnt asked either. but sure i will ask before job done tomorow,hope we will come on some agreement.but this is last visit to this guy next time SHAUN thats for sure.. Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6754697 Share on other sites More sharing options...
Krishy Posted February 18, 2013 Share Posted February 18, 2013 you can only learn from personal experiences mate. Good luck Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6755643 Share on other sites More sharing options...
maklaw Posted February 18, 2013 Author Share Posted February 18, 2013 yeah you are spot about the personal experience,after saw all the way while they were changing cam gasket and half moon i am 100% sure i can change that myself now...far out man cost me $400 total and gasket cost $109.90 so you are right do it yourself good idea.thanx for help guys hope all go well now.. Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6756301 Share on other sites More sharing options...
DavidR34GTTNIZMO Posted April 28, 2013 Share Posted April 28, 2013 Well I dont have an R33 BUT!.....I do have a R34 GTT Nizmo. With the nizmo exhaust that opens up and shuts like a varex muffler. So this afternoon I un-siezed the valve and kept it open as the switch doesnt work anymore and I cannot find a thread to help me with the motor or relay for this but anywho....The point I'm making is that after opening the valve I realised how restricted the exhaust was and the quite real difference I felt after opening up the exhaust. So if you are looking for more power, then free flowing and opening up the exhaust should be you're first point of call. As for the fuel economy....you bought a high performance vehicle dude Welcome to the cub. Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6830179 Share on other sites More sharing options...
discoPumpkin Posted May 10, 2013 Share Posted May 10, 2013 i changed and last week done service including..oil change,transmission service,plugs change,O2 senson change,brake pads change..total cost me $1000.. but no diffrence in fuel economy and power as well... Far out 1k for a full service, thats pretty steep, dont even know if that inclided clutch, radiator and brake fluids, but next time do it yaself and save ship loads Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-6846081 Share on other sites More sharing options...
maklaw Posted January 4, 2014 Author Share Posted January 4, 2014 hey all people am back to you guys again to get some idea's and help, i searched in fourm for my problem but no cure for my car with search engine. car in question is R33 gts-t s1 auto with catback exuast.rest is stock. am having a problem with my car,recently i was driving and on a intersection its just died on me so i thought whats wrong and i started again and its start no trouble. since then its start great every arvo as i work in arvo shifts,nothing drama's for 20 minutes driving and then its just cut itself dosn't matter i am on intersection or driving its just shut it off and then if i start its good again and after few minutes same cuts out again. during the night when i finished my job and driving home no drama most of time. i searched in this fourm and i cleaned AFM,air valve,change oil,oil filter,fuel and air filter but nothing good today again after 20 minutes driving same situation but driving back at night no problem. i dont know what to think and where to look....if you guys know anything or faced this kind of problem in past please be kind and show me some right way to fix it. Thanks All In advance Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-7160328 Share on other sites More sharing options...
maklaw Posted January 6, 2014 Author Share Posted January 6, 2014 It was AFM dry joints refresh them all good.i took car to shaun bootsworx he went for drive and first thing he said AFM must be culprit. Link to comment https://www.sau.com.au/forums/topic/334389-new-to-skyline-please-help/page/5/#findComment-7161601 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now