Jump to content
SAU Community

Recommended Posts

Hi,

Just wondering if S1 and S2 autos are the same ?

Also the front diff does that just use engine oil ?

The transfer case, thats part of the gearbox so it uses transmission fluid right ?

How do you flush this transmission ?

Thanks in advance

Brendan

Link to comment
https://www.sau.com.au/forums/topic/334481-s1-and-s2-4wd-autos/
Share on other sites

S1 auto is pretty much an R33 and earlier box.

S2 auto is an R34 tiptronic box, fair bit different to the S1.

Not sure on front diff.

Transfer case is seperate to the gearbox and uses its' own fluid, have a search and you'll find out what it is.

Just wondering if S1 and S2 autos are the same ? No

Also the front diff does that just use engine oil ? NO, GL5 85w-90 gear oil...where did you get that idea from ???

The transfer case, thats part of the gearbox so it uses transmission fluid right ? yes

How do you flush this transmission ? take it to an transmission shop for best results

Hi,

Just wondering if S1 and S2 autos are the same ?

Also the front diff does that just use engine oil ?

The transfer case, thats part of the gearbox so it uses transmission fluid right ?

How do you flush this transmission ?

Get yourself an auto sump gasket kit and a 20L drum of (ideally) quality synthetic atf. You need 12 to 14L for the auto and you can use the rest for your attessa and power steering. Drain the sump and drop it (easier said then done - you will have to support the box and remove the rear mounting). You will only get betweeen 1 and 2 litres this way. Check that the new internal filter is exactly the same (otherwise the sump won't go back on) and if not either modify the new one to suit or clean the old one and put it back. Put 2L of fresh oil down the dip stick tube.

Then pull a hose off the trans oil cooler and run the engine until you have pumped out 2L into a container. Pour 2L of new oil down the dipstick tube and repeat until you get clean oil coming out. This will take 12 to 14L in total.

I'm totally confused with the s1 and s2 business.

Does that only apply to m35s or does it apply to c34's also ?

And what is this in reference too this thread?

and if its only for m35's and mine being a s1, why is it a 5 speed triptronic?

or is it 4 with overdrive?

Edited by PetroDola
I'm totally confused with the s1 and s2 business.

Does that only apply to m35s or does it apply to c34's also ?

And what is this in reference too this thread?

and if its only for m35's and mine being a s1, why is it a 5 speed triptronic?

or is it 4 with overdrive?

This thread refers to S1 and S2 C34 1996 to 2000 not M35.
  • 2 months later...
Does anyone know what needs to be done to fit a s2 tip auto into an s1? So, other than box & steering wheel, what else (ecu?...)?

if your going to go to this level of f**king about just put in a 5 speed ;-) The tiptronic's not that cool.

Yeah ive thought about the gtr box, as ive driven manuals all my life! But recently ive discovered how easy autos are to drive in peak hour traffic, but they totally suck balls in the hills! So i was hoping for the compromise of auto with the ability to have some control over the shifting when i needed to! (ive never driven a tip gearbox though)

So i guess that raises the question of will a neo ecu run an s1 rb25? (nistune?)

Yeah ive thought about the gtr box, as ive driven manuals all my life! But recently ive discovered how easy autos are to drive in peak hour traffic, but they totally suck balls in the hills! So i was hoping for the compromise of auto with the ability to have some control over the shifting when i needed to! (ive never driven a tip gearbox though)

So i guess that raises the question of will a neo ecu run an s1 rb25? (nistune?)

I believe the short answer to the above is no although my mechanic is fond of saying anything is possible if you want to spend enough money. In fact I don't think the tiptronic has any more abilities in the hills than the S1 box (which I used to have before I converted it to manual). With the S1 box you can turn off the "overdrive" which leaves you the bottom three gears or if you are going downhill with a caravan or car on a trailer you can chop down to 2nd. If you also hit the snow button that cuts out 1st gear so you can pretty much control what gear you are going to use. I can't really see any value in changing to tiptronic.

^^ lol

The tiptronic box is far superior than the earlier auto.

Put a shift kit in it and it's excellent.

As for getting a Neo ECU to run a normal 25.. you would need to find out everything that is different sensor and wiring wise, and change it to suit the Neo.

OR

Just get a s2 halfcut and ditch your crappy normal 25 in favour of the Neo :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yesterday's day in review: All the wiring to the lights up the front how I want it, is ran, terminated, and all to length. The only lighting up front I haven't finished is the side indicators, as I need to get to the partly cutup factory loom, and find the plugs for them. Interesting note, the side indicators use the exact same plug that's in the doors for something else that I don't remember what it is... So that plug better be careful...   Power steering solenoid, on the R33 is variable, and from memory PWM. The Ford's control from the docs I have so far, is it's just a on or off control. So I'm not sure it's what I want, and in any case, power steering running, but at its heaviest (solenoid off) is likely what I'll want anyway, so I'm not yet touching it at all. All the wiring I can complete so far, is done. There are 3 wires I need to make a plug for at the ECU, and these are just for the vehicle speed sensor, of which I need to get a T5 from an AU, so I can use its output that has the speed sensor on it. (My car doesn't have ABS, otherwise I'd set it up to use one of the ring gears on that). I need to buy new headlight globes and front parker globes, otherwise I could show photos of lights working. Current fuel lines in and out on this motor are "5/16". I'll order hardline, and some AN fittings for that, and I just need to 100% check fuel line size at the tank end, to get the ends for it. I'm also looking at a few options for the banjo bolts to AN fittings for the power steering rack. I'll pull the reservoir off the Barras PS pump. There's an off the shelf fitting for that pump for a -10 AN feed, and it'll use a 16mm to dash -6 an outlet to feed the rack. I'll be making my own power steering reservoir, I'm going through the thought process at the moment of how I'll run the baffles, and I need to research another idea for it too.
    • Two inlet runners changes the engines characteristics requiring less fuel to make torque at different points in the rev range. The smaller diameter inlet runners on the DET increases air flow speed, which improves atomisation of fuel, particularly in low load/idle for better burn, and in specific areas of the engine, (areas you would use when driving normally) increases the efficiency. All of those items change how efficient the engine is at different speeds. The changes on the neo help slightly to improve emissions where it matters. The overall improvements won't be the likes of going from an engine built in the 70s to an engine built in the 2000s, it's just a small step. But still leaves it the RB with the best chance of improvement.   As for your comment about the whole using a cat to not need to worry about those gases. Two things, no system is 100% perfect. It won't eliminate everything. So reduce the quantity you put into it, you still reduce the output. Two, make that system do less work, and it's likely to survive a little bit longer. Funnily enough to, one trick employed to get cats up to temp, AND to drastically reduce emissions before they get up to temp, is to reduce ignition timing.
    • Maybe I should have written that a bit better lol. I did come 8th last in English at school during the HSC, ironically spent 2 decades reading/writing specifications and contracts in IT 😂
    • Right, but that's in-cylinder, there's the interaction between that and the TWC which complicates things. Pulling out timing to reduce NOx is a strategy I saw in transitional emissions vehicles like stuff from 1974 or so. The two inlet runner system is interesting but I'm not sure it makes a huge difference as far as emissions goes, is it a tumble valve? I've seen stuff like that even in cars from the late 80s. 
    • Hello all,   so i recently swapped out my rb20de neo with an rb25de neo( engine,transmission, wiring and the diff everything) but i just cant get the gear indication light on the dash to work when i switch to tiptronic mode. Note there is a steering wheel switch beside the shifter and i dont have that. I did notice yesterday while switching to tiptronic that the indicator on the dash started to work but it didn't afterwards. Does anyone know how this actually works? Or do i still need that steering wheel switch to be connected and on for that gear indicator to work?
×
×
  • Create New...