Jump to content
SAU Community

Recommended Posts

Hi all. I've been trying to put on a better exhaust on my r34 GTT for a while now but it seems there are not many of them on sale.

So i was told I could purchase a r33 exhaust and reweld it to fit on r34. I was wondering how would that be done. Say I have a kakimoto N1+Rev cat back for r33 gts-t. There seems to be only one difference at the intermediate pipe near the cat.

So it is possible just to cut the part and somehow reweld it to fit to a r34? I was told by a exhaust shop that their hourly rate is $95.00 and 3in ss bends are $55.00ea. How much do you guys think the whole process is gonna cost?

Thx HEAPS!

Pics: R34: http://www.kakimotoracing.co.jp/image_N31348.html

R33: http://www.kakimotoracing.co.jp/image_N31307.html

Link to comment
https://www.sau.com.au/forums/topic/334494-converting-r33-exhaust-to-r34/
Share on other sites

Hi all. I've been trying to put on a better exhaust on my r34 GTT for a while now but it seems there are not many of them on sale.

Hey mate,

that's exactly what I thought a while back when I decided to get an 2nd hand R33 coupe cat back for my R34 sedan. Have a look at these two threads:

- Exhaust System Lengths On R34 Gtt Sedan?, Modifying R34 GTT Coupe or R33 GTSt system to suit?

- Installing Jjr Bellmouth Front/dump Pipe On R34, Who's done it, any advice or tips?

I my case the exhaust shop charged about 3 hours labour for modifying and fitting a full turbo back. I reckon a cat back only should be about half of that.

Cheers

  • 5 years later...

Digging up an oldie here, but how did you go?

I'm also looking at a turboback system to replace the stock one on my 2001 GTT and have heard many people just going with an R33 turboback and getting a shop to weld/fit etc.

will this actually work/viable option?

Digging up an oldie here, but how did you go?

I'm also looking at a turboback system to replace the stock one on my 2001 GTT and have heard many people just going with an R33 turboback and getting a shop to weld/fit etc.

will this actually work/viable option?

It does work, a mate of mine had to cut the exhaust shorter and reweld the flange to get the R33 GTS-t OEM exhaust to fit a R34 GT-t. Afaik nothing else needs to be done, most or all of the hangers line up fine

Digging up an oldie here, but how did you go?

I'm also looking at a turboback system to replace the stock one on my 2001 GTT and have heard many people just going with an R33 turboback and getting a shop to weld/fit etc.

will this actually work/viable option?

Yeah ok, I've still got the original dump and HKS Super Drager rear muffler but everything between has been changed ... basically the R33 coupe system was originally hacked to fit my 34 sedan but I was never super happy with the way it saw, was way too low and scrapey.

I got the system redone with a new mid muffler and new piping, all tucked in property. It sits really well now and flows excellent with a Venom cat, but is really droney at ~2000rpm.

Since the car is a weekender I don't really care but given that I originally paid $250 for the 33 catback and have since spent probably 1k+ to modify and remodify it, it's not something I would recommend. Just get a reputable exhaust shop to make you a custom system, or get an entry level system like X-Force, much easier.

But perhaps if you're going 33 coupe -> 34 coupe it's easier.

  • 3 weeks later...

33 to 34 needs a bit lengthened. Heaps easy

Still sitting on this one boys, but really need a system soon. My GTT sounds so.. stock ):

Reckon this would work for me based on the above: http://justjap.com/engine/exhaust/exhaust-systems/jjr/jjr-hyperflow-complete-exhaust-system-nissan-skyline-ecr33-rb25det.html

Or better to go into an exhaust shop and get their two bobs?

This stuff is so easy I do not know why it keeps coming around.

Step one. Choose and buy a mid muffler and a rear muffler. Or just one of them depending on taste.

Step two. Get exhaust shop to build the pipework from scratch. 3", 3.5" or 4" to suit your needs and the mufflers you bought.

THIS IS WHAT EXHAUST SHOPS ARE FOR!!!!11!!!!1one juan. What do you think we used to do back in the 70s and 80s when we wanted a new exhaust for a car?

  • Like 3

THIS IS WHAT EXHAUST SHOPS ARE FOR!!!!11!!!!1one juan. What do you think we used to do back in the 70s and 80s when we wanted a new exhaust for a car?

Don't underestimate the ability for a workshop to f**k it up though. I had a local exhaust shop in Brookvale make a catback for my R34 and it was f**king HORRIBLE. First I told him I wanted it quiet, so he fit a single straight through muffler and it was around 100dB in the cabin. 2000RPM was a HUGE drone fest. Actually it sounded pretty good north of 4000RPM but how often do you drive around up there on the street? Not much. And you gotta go through 2000RPM a lot.

Took it back and they fitted some poxy triflow muffler. A bit quieter, still droned terribly at 2000RPM (about 85dB in cabin) but from 3000+ it was quiet as a mouse even when giving it stick. Totally wrong. I don't care if it's noisy at WOT just give me something docile when I'm at light throttle

But, I agree in principle. The catback is in my garage waiting to be attacked with an angle grinder and taken to scrap metal recycler. It's so bad I wouldn't even contemplate selling it because you've have to be a complete bell end to want an exhaust that did that sort of thing.

Soon I will go to another exhaust shop and suss them out to see if they know what they're talking about before spending money.

I think the typical enthusiast would just be a wet finger in the air choosing a muffler. A real exhaust shop will have the expertise to know what works and what doesn't.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Could someone post some pictures of the factory Jack , tools, spare tire and how they were in a 1998 ER34 2 door skyline originally?
    • UPDATE: Hi all!  As we are getting towards the end of this thread where I’ll showcase final dyno numbers and graph, I wanted to provide an update. Tao from HyperGear has done an amazing job building the custom divided T3 housing for the G30. Communication was flawless, price was great, and now the housing is estimated to arrive in 7-10 days! Very very pleased. I must add, if someone is looking for an affordable turbo and end up reading this thread, I would recommend HyperGear. Genuine brands are the way to go as their proven reliability, predictable performance, and there’s a plethora of information available for specs, flow, and more. This HyperGear recommendation is based on their excellent communication, dedication, and willingness to listen to their customers. I particularly liked their ability to create custom adaptations tailored to specific needs, which is a HUGE benefit over other brands. And if we consider the HyperGear provided dyno results, it adds reassurance knowing their turbos can compete against genuine brands. Next update will be after the dyno!  
    • I've previously seen people post up "dress up bolt kits" for RBs but don't remember seeing them specify the full contents. I can only really suggest you grab the verniers and start measuring, and keep in mind the cam cover and timing cover bolts are both quite specific with a wider unthreaded section where the bushes sit, that will make it hard to get aftermarket replacements which tend to be all thread (set screws) or for longer bolts a flat section with a shorter threaded section at the end
    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
×
×
  • Create New...