R33 Brake Caliper Removal

[skyline_freak_r33]

Hey guys,

I need to remove my brake calipers due to a guy wanting to purchase them!

I know to remove the caliper i need to remove the 2 rear bolts..

But to put the new turbo brakes on do i need to buy a brake bleed kit?

Is it a hard job to do?

cheers

[SLED]

no, just remove the master cyl cap and gently press the caliper pistons back to allow room for the thicker new pad.....finish by checking fluid level.

EDIT: I just read your post again.....sounds like you're doing calipers rather than just pads, in which case yes, you will need to bleed the system....you won't need a bleed kit if you've got someone pumping the pedal for you.

[Tommy Kaira RL]

I changed my non turbo brakes over to turbo ones a while ago. I think you will need the turbo disks aswell. I drilled mine to suit 4 stud until I got the 5 stud hubs. Other than that its not a hard job the brake lines bolt straight up to the new calipers. Then just need to be bled like sled said.

[typevu]

I changed my non turbo brakes over to turbo ones a while ago. I think you will need the turbo disks aswell. I drilled mine to suit 4 stud until I got the 5 stud hubs. Other than that its not a hard job the brake lines bolt straight up to the new calipers. Then just need to be bled like sled said.

Just dont round off the brake line nut otherwise a simple job will turn into a pain in the backside.

[DSTROY]

Vice grips solve that problem.