Jump to content
SAU Community

Recommended Posts

My R34 NA is starting to be a handfull i need some suggestions or solutions.

1) my Speedo lights are not working......so at night i cant see how fast im going, i have resulted to using a GPS to calculate my speed....., My freind was setting up my stereo do you think he could have cut or diplaced a wire related to the gauges ?, or if its a fuse possibly.

2) My tail lights are not working, my brake lights are.....I checked the fuse box and where tail lights is supposed to be its missing, i dont know why the hell its not there....or why the hell i didnt notice in the last two weeks i had this.....i dont drive that much at night.

Please help if you can. much appeciated.

Link to comment
https://www.sau.com.au/forums/topic/334555-need-help/
Share on other sites

Try putting a fuse in there, it's will be the fuse blown or missing causing the problem. If you put a fuse in and it blows then you have a short somewhere.

Have you installed a new CD player recently? There is a wire behind the stereo, which is a earth with ignition off and a power with ignition on or vice versa and is easily mistaken for something it is not. So when this wire is used incorrectly in a cd player install, it blows the parking light fuse.

Have you checked fuses inside the car and under the hood? I know on 33's that particular fuse is in the boot, not inside the car.

Link to comment
https://www.sau.com.au/forums/topic/334555-need-help/#findComment-5421355
Share on other sites

grab a multimeter and try a continuity test in figgerent parts of the circuit.

This will help diagnose where the problem is.

You may have to take the dash out.

It may be as simple as a blown gobe.

This is not a nice exercise.

Best of luck

Link to comment
https://www.sau.com.au/forums/topic/334555-need-help/#findComment-5422579
Share on other sites

Try putting a fuse in there, it's will be the fuse blown or missing causing the problem. If you put a fuse in and it blows then you have a short somewhere.

Have you installed a new CD player recently? There is a wire behind the stereo, which is a earth with ignition off and a power with ignition on or vice versa and is easily mistaken for something it is not. So when this wire is used incorrectly in a cd player install, it blows the parking light fuse.

Have you checked fuses inside the car and under the hood? I know on 33's that particular fuse is in the boot, not inside the car.

yes i did install a cd player, but i didnt drive the car at night untill a couple days later so i wasnt to sure if it was because we played with the wires, when i asked my mate who did all the installing he says it couldnt be. As for the fuses i have changed all of them under the hood after i did it, as for the fuses inside the car they all seem fine, which fuse would exactly be related to speedo lights, because in car lights fuse is working perfectly, so it might actually be a blown globe.....

Link to comment
https://www.sau.com.au/forums/topic/334555-need-help/#findComment-5422848
Share on other sites

1. Firstly, unless your mate is a professional or knows what he's doing.. It's not always best to be cheap and let them have a go.. Can cost more in the end. However i'd check fuses first, then just pull the instrument cluster out and replace a bulb and check if it lights up.. then if that fails, i'd be checking your mates wiring to see if he's done something wrong..

2. Ummm... What is it your asking.. Just replace the fuse if it's missing.. Previous owner prob blew the fuse and took it out and not replaced it

Link to comment
https://www.sau.com.au/forums/topic/334555-need-help/#findComment-5422954
Share on other sites

1. Firstly, unless your mate is a professional or knows what he's doing.. It's not always best to be cheap and let them have a go.. Can cost more in the end. However i'd check fuses first, then just pull the instrument cluster out and replace a bulb and check if it lights up.. then if that fails, i'd be checking your mates wiring to see if he's done something wrong..

2. Ummm... What is it your asking.. Just replace the fuse if it's missing.. Previous owner prob blew the fuse and took it out and not replaced it

He has an r34 to and said his done it a couple of time on his, so i didnt really think to much of it. But i have replaced checked all the in car fuses today and they are all fine...., i guess its time to check the bulb out and im not looking foward to it.

Link to comment
https://www.sau.com.au/forums/topic/334555-need-help/#findComment-5424214
Share on other sites

Why not.. They are easy to get to..

Drop your steering wheel down to it's lowest setting.. Unscrew the surround around your cluster.. Unscrew the cluster.. Pull out and disconnect plugs.. Pull out completely.. Check bulbs..

Link to comment
https://www.sau.com.au/forums/topic/334555-need-help/#findComment-5424497
Share on other sites

Ok so i took the car to the car electrician and he bascially told me my Alternator is overchaging and around something like 15.5v, above the accepted standard, and he thinks thats what caused my bulbs to blow......, this really sux for a poor Uni student working once a week who wanted to buy pimped out rims and exhaust, he reckons 500 plus labour...... Im thinking i just Buy an original used and reconditioned alternator that these japanese distributing company is selling on ebay and get my family mechanic to give me a family discount lol.

Link to comment
https://www.sau.com.au/forums/topic/334555-need-help/#findComment-5428569
Share on other sites

Problem solved, the lesson to be learnt is if your not a proffesional dont go installing a head unit, apparently its done a little wire frying in the Alternater and fuses and bulbs. All fixed now, but its set me back 350 but its all fixed now new wires, propely soldered Head unit, new bulb in tail light and speedo.

Link to comment
https://www.sau.com.au/forums/topic/334555-need-help/#findComment-5432846
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan! Yeah it's street use for me only. Maybe occasional track day. Any difference in noise when running with the two pumps? I would expect the lift pump to be more quiet than the main pump so hopefully not? And yes, unfortunately quite a big price difference to the simple hanger setup. Though I'm usually willing to trade money for better reliability and future-proofing. Buy once, cry once and all that. I'd be very happy to never have to deal with fuel pump / wiring issues again  
    • The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
×
×
  • Create New...