Jump to content
SAU Community

Recommended Posts

hi wrecking my r33 as i blew my 25/30 and am completly over it :P

parts located northern nsw near byron bay

happy to mail but registered australia post

if chasing anything for a 33 let me know i might have it just not listed

thanks

rb20/25 top mount manifold -

4 bolt external gate to go with manifold with screamer -

PCP660 same as a kkr660 turbo under 2000ks on the car -

70 front 84 rear water and oil cooled

4inch mouth drift pod filter -

braided oil line -

uras front bar made in japan with nismo clear blinkers - $250

D speed side skirts -$200

BN sports rear bar - $200

rb25det series 2 coil packs -$100

rb25det injectors - $80

rb25det standard throttle body - $80

rb25 90mm throttle body (bolts staight onto greddy copy plenums) - $150

rb25det standard inlet plenum converted to forward facing(top and bottom halfs) - $150

rb25det manual ecu - $150

stock corner mount - $50

hybrid front mount - $200

front mount piping to suit forward facing plenum - $150

r33 engine cross member -

r33 power steering res - $50

r33 brake master (abs model) -

r33 brake booster -

r33 steering rack -

rb25 radiator shroud -

r33 front lower control arms - $150 pair

r33 lsd in housing,has a slight wine,would be great to weld and slide - $100

standard r33 rear bar - $70

front and rear seat belts -

r33 gtst after market grill - $50

r33 boot - $100

r33 gtst series 2 rear wing - $80

r33 gtst series 1 rear wing - $80

r33 m spec side skirts - $100

r33 drivers side gaurd perfect nick in black - $100

passenger door complete with glass - $150

drivers door complete with glass - $150

fuel tank - $150

mirrors - $30 each

rear tail lights - $50 each

rear view mirror - $25

rear seats good condition - $80

dash cluster - $100

series 2 front seats with rails - $150

dash facia - $40

interior carpet - $100

rear shelf - $30

door cards - $50 each

all glass offers on each

TRI FORCE ZELDA made by RAYS

17x9 +14s all round

bout 10cm dish - $900 with good tires 80% all round or offers without

clutch brake and accelerator pedal setup - $150

rb25 auto box removed from car at 120xxxks -

will do shell as front or half cut etc etc

anything else off a 33 hit me up for it

post-48080-1283160469_thumb.jpg

post-48080-1283160513_thumb.jpg

post-48080-1283160538_thumb.jpg

post-48080-1283160564_thumb.jpg

post-48080-1283160590_thumb.jpg

post-48080-1283160633_thumb.jpg

post-48080-1283160676_thumb.jpg

post-48080-1283160702_thumb.jpg

post-48080-1283160719_thumb.jpg

post-48080-1283160744_thumb.jpg

post-48080-1283160784_thumb.jpg

post-48080-1283160814_thumb.jpg

post-48080-1283160828_thumb.jpg

post-48080-1283160852_thumb.jpg

post-48080-1283160883_thumb.jpg

Edited by team carefactor
Link to comment
https://www.sau.com.au/forums/topic/334884-wrecking-complete-r33/
Share on other sites

hi wrecking my r33 as i blew my 25/30 and am completly over it :P

parts located northern nsw near byron bay

happy to mail but registered australia post

if chasing anything for a 33 let me know i might have it just not listed

thanks

rb20/25 top mount manifold -

4 bolt external gate to go with manifold with screamer -

PCP660 same as a kkr660 turbo under 2000ks on the car -

70 front 84 rear water and oil cooled

4inch mouth drift pod filter -

braided oil line -

uras front bar made in japan with nismo clear blinkers - $250

D speed side skirts -$200

BN sports rear bar - $200

rb25det series 2 coil packs -$100

rb25det injectors - $80

rb25det standard throttle body -

rb25 90mm throttle body (bolts staight onto greddy copy plenums) -

rb25det standard inlet plenum converted to forward facing(top and bottom halfs) - $150

rb25det manual ecu - $150

stock corner mount - $50

hybrid front mount -

front mount piping to suit forward facing plenum -

r33 engine cross member -

r33 power steering res - $50

r33 brake master (abs model) -

r33 brake booster -

r33 steering rack -

rb25 radiator shroud -

r33 front lower control arms - $150 pair

r33 lsd in housing,has a slight wine,would be great to weld and slide - $100

standard r33 rear bar - $70

front and rear seat belts -

r33 gtst after market grill -

r33 boot - $100

r33 gtst series 2 rear wing - $80

r33 gtst series 1 rear wing - $80

r33 m spec side skirts - $100

r33 drivers side gaurd perfect nick in black - $100

passenger door complete with glass - $150

drivers door complete with glass - $150

fuel tank - $150

mirrors - $30 each

rear tail lights -

rear view mirror - $25

rear seats good condition - $80

dash cluster - $100

series 2 front seats with rails - $150

dash facia -

interior carpet - $100

rear shelf - $30

door cards - $50 each

all glass offers on each

TRI FORCE ZELDA made by RAYS

17x9 +14s all round

bout 10cm dish -

clutch brake and accelerator pedal setup -

rb25 auto box removed from car at 120xxxks -

will do shell as front or half cut etc etc

anything else off a 33 hit me up for it

How much is front mount...? have you got 3 inch dump + front pipe..?

have u got the clutch master,slave cylinders,tailshaft,flywheel,pedal kits and lining?lookin to do a conversion for my rb25.if so how much posted to 3030? lemme know 0411795674 cheers

hi wrecking my r33 as i blew my 25/30 and am completly over it ;)

parts located northern nsw near byron bay

happy to mail but registered australia post

if chasing anything for a 33 let me know i might have it just not listed

thanks

rb20/25 top mount manifold -

4 bolt external gate to go with manifold with screamer -

PCP660 same as a kkr660 turbo under 2000ks on the car -

70 front 84 rear water and oil cooled

4inch mouth drift pod filter -

braided oil line -

uras front bar made in japan with nismo clear blinkers - $250

D speed side skirts -$200

BN sports rear bar - $200

rb25det series 2 coil packs -$100

rb25det injectors - $80

rb25det standard throttle body - $80

rb25 90mm throttle body (bolts staight onto greddy copy plenums) - $150

rb25det standard inlet plenum converted to forward facing(top and bottom halfs) - $150

rb25det manual ecu - $150

stock corner mount - $50

hybrid front mount - $200

front mount piping to suit forward facing plenum - $150

r33 engine cross member -

r33 power steering res - $50

r33 brake master (abs model) -

r33 brake booster -

r33 steering rack -

rb25 radiator shroud -

r33 front lower control arms - $150 pair

r33 lsd in housing,has a slight wine,would be great to weld and slide - $100

standard r33 rear bar - $70

front and rear seat belts -

r33 gtst after market grill - $50

r33 boot - $100

r33 gtst series 2 rear wing - $80

r33 gtst series 1 rear wing - $80

r33 m spec side skirts - $100

r33 drivers side gaurd perfect nick in black - $100

passenger door complete with glass - $150

drivers door complete with glass - $150

fuel tank - $150

mirrors - $30 each

rear tail lights - $50 each

rear view mirror - $25

rear seats good condition - $80

dash cluster - $100

series 2 front seats with rails - $150

dash facia - $40

interior carpet - $100

rear shelf - $30

door cards - $50 each

all glass offers on each

TRI FORCE ZELDA made by RAYS

17x9 +14s all round

bout 10cm dish - $900 with good tires 80% all round or offers without

clutch brake and accelerator pedal setup - $150

rb25 auto box removed from car at 120xxxks -

will do shell as front or half cut etc etc

anything else off a 33 hit me up for it

Hey mate r u sellin the inlet plenum show in the picture mounted to the engine???? if not would u take $100 for the other one and be able to post it to wollongong???

brake master $60

inlet plenum in pic on engine already sold

will take $100 for the other modified forward facing one but

sorry cant mail big items like body kit

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...